[Blackfin] arch: Equalize include files: Add VR_CTL masks

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

include/asm-blackfin/mach-bf533/defBF532.h

@@ -468,6 +468,8 @@
 #define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
 #define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
 #define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
+#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
+#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
 
 #define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
 #define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */

include/asm-blackfin/mach-bf548/defBF54x_base.h

@@ -2329,6 +2329,26 @@
 #define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
 #define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
 
+#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+
+#define	GAIN_5			0x0000	/* GAIN = 5*/
+#define	GAIN_10			0x0004	/* GAIN = 1*/
+#define	GAIN_20			0x0008	/* GAIN = 2*/
+#define	GAIN_50			0x000C	/* GAIN = 5*/
+
+#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */

include/asm-blackfin/mach-bf561/defBF561.h

@@ -868,6 +868,34 @@
 #define CHIPID_FAMILY          0x0FFFF000
 #define CHIPID_MANUFACTURE     0x00000FFE
 
+/* VR_CTL Masks																	*/
+#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+#define	HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation	*/
+#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+
+#define	GAIN			0x000C	/* Voltage Level Gain	*/
+#define	GAIN_5			0x0000	/* GAIN = 5*/
+#define	GAIN_10			0x0004	/* GAIN = 1*/
+#define	GAIN_20			0x0008	/* GAIN = 2*/
+#define	GAIN_50			0x000C	/* GAIN = 5*/
+
+#define	VLEV			0x00F0	/* Internal Voltage Level */
+#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
 /* PLL_DIV Masks */
 #define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */