media: intel-ipu3: cio2: add new MIPI-CSI2 driver

This patch adds CIO2 CSI-2 device driver for
Intel's IPU3 camera sub-system support.
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NHyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: NRajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: NVijaykumar Ramya <ramya.vijaykumar@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

MAINTAINERS

@@ -7068,6 +7068,14 @@ R:	Dan Williams <dan.j.williams@intel.com>
 S:	Odd fixes
 F:	drivers/dma/iop-adma.c
 
+INTEL IPU3 CSI-2 CIO2 DRIVER
+M:	Yong Zhi <yong.zhi@intel.com>
+M:	Sakari Ailus <sakari.ailus@linux.intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/pci/intel/ipu3/
+F:	Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst
+
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
 S:	Maintained

drivers/media/pci/Kconfig

@@ -54,5 +54,7 @@ source "drivers/media/pci/smipcie/Kconfig"
 source "drivers/media/pci/netup_unidvb/Kconfig"
 endif
 
+source "drivers/media/pci/intel/ipu3/Kconfig"
+
 endif #MEDIA_PCI_SUPPORT
 endif #PCI

drivers/media/pci/Makefile

@@ -14,7 +14,8 @@ obj-y        +=	ttpci/		\
 		ddbridge/	\
 		saa7146/	\
 		smipcie/	\
-		netup_unidvb/
+		netup_unidvb/	\
+		intel/
 
 obj-$(CONFIG_VIDEO_IVTV) += ivtv/
 obj-$(CONFIG_VIDEO_ZORAN) += zoran/

drivers/media/pci/intel/Makefile

+#
+# Makefile for the IPU3 cio2 and ImGU drivers
+#
+
+obj-y	+= ipu3/

drivers/media/pci/intel/ipu3/Kconfig

+config VIDEO_IPU3_CIO2
+	tristate "Intel ipu3-cio2 driver"
+	depends on VIDEO_V4L2 && PCI
+	depends on VIDEO_V4L2_SUBDEV_API
+	depends on X86 || COMPILE_TEST
+	depends on MEDIA_CONTROLLER
+	depends on HAS_DMA
+	depends on ACPI
+	select V4L2_FWNODE
+	select VIDEOBUF2_DMA_SG
+
+	---help---
+	This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel
+	Skylake and Kaby Lake SoCs and used for capturing images and
+	video from a camera sensor.
+
+	Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2
+	connected camera.
+	The module will be called ipu3-cio2.

drivers/media/pci/intel/ipu3/Makefile

+obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o

drivers/media/pci/intel/ipu3/ipu3-cio2.h

+/*
+ * Copyright (c) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __IPU3_CIO2_H
+#define __IPU3_CIO2_H
+
+#define CIO2_NAME					"ipu3-cio2"
+#define CIO2_DEVICE_NAME				"Intel IPU3 CIO2"
+#define CIO2_ENTITY_NAME				"ipu3-csi2"
+#define CIO2_PCI_ID					0x9d32
+#define CIO2_PCI_BAR					0
+#define CIO2_DMA_MASK					DMA_BIT_MASK(39)
+#define CIO2_IMAGE_MAX_WIDTH				4224
+#define CIO2_IMAGE_MAX_LENGTH				3136
+
+#define CIO2_IMAGE_MAX_WIDTH				4224
+#define CIO2_IMAGE_MAX_LENGTH				3136
+
+/* 32MB = 8xFBPT_entry */
+#define CIO2_MAX_LOPS					8
+#define CIO2_MAX_BUFFERS			(PAGE_SIZE / 16 / CIO2_MAX_LOPS)
+
+#define CIO2_PAD_SINK					0
+#define CIO2_PAD_SOURCE					1
+#define CIO2_PADS					2
+
+#define CIO2_NUM_DMA_CHAN				20
+#define CIO2_NUM_PORTS					4 /* DPHYs */
+
+/* 1 for each sensor */
+#define CIO2_QUEUES					CIO2_NUM_PORTS
+
+/* Register and bit field definitions */
+#define CIO2_REG_PIPE_BASE(n)			((n) * 0x0400)	/* n = 0..3 */
+#define CIO2_REG_CSIRX_BASE				0x000
+#define CIO2_REG_MIPIBE_BASE				0x100
+#define CIO2_REG_PIXELGEN_BAS				0x200
+#define CIO2_REG_IRQCTRL_BASE				0x300
+#define CIO2_REG_GPREG_BASE				0x1000
+
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_CSIRX_BASE */
+#define CIO2_REG_CSIRX_ENABLE			(CIO2_REG_CSIRX_BASE + 0x0)
+#define CIO2_REG_CSIRX_NOF_ENABLED_LANES	(CIO2_REG_CSIRX_BASE + 0x4)
+#define CIO2_REG_CSIRX_SP_IF_CONFIG		(CIO2_REG_CSIRX_BASE + 0x10)
+#define CIO2_REG_CSIRX_LP_IF_CONFIG		(CIO2_REG_CSIRX_BASE + 0x14)
+#define CIO2_CSIRX_IF_CONFIG_FILTEROUT			0x00
+#define CIO2_CSIRX_IF_CONFIG_FILTEROUT_VC_INACTIVE	0x01
+#define CIO2_CSIRX_IF_CONFIG_PASS			0x02
+#define CIO2_CSIRX_IF_CONFIG_FLAG_ERROR			BIT(2)
+#define CIO2_REG_CSIRX_STATUS			(CIO2_REG_CSIRX_BASE + 0x18)
+#define CIO2_REG_CSIRX_STATUS_DLANE_HS		(CIO2_REG_CSIRX_BASE + 0x1c)
+#define CIO2_CSIRX_STATUS_DLANE_HS_MASK			0xff
+#define CIO2_REG_CSIRX_STATUS_DLANE_LP		(CIO2_REG_CSIRX_BASE + 0x20)
+#define CIO2_CSIRX_STATUS_DLANE_LP_MASK			0xffffff
+/* Termination enable and settle in 0.0625ns units, lane=0..3 or -1 for clock */
+#define CIO2_REG_CSIRX_DLY_CNT_TERMEN(lane) \
+				(CIO2_REG_CSIRX_BASE + 0x2c + 8 * (lane))
+#define CIO2_REG_CSIRX_DLY_CNT_SETTLE(lane) \
+				(CIO2_REG_CSIRX_BASE + 0x30 + 8 * (lane))
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_MIPIBE_BASE */
+#define CIO2_REG_MIPIBE_ENABLE		(CIO2_REG_MIPIBE_BASE + 0x0)
+#define CIO2_REG_MIPIBE_STATUS		(CIO2_REG_MIPIBE_BASE + 0x4)
+#define CIO2_REG_MIPIBE_COMP_FORMAT(vc) \
+				(CIO2_REG_MIPIBE_BASE + 0x8 + 0x4 * (vc))
+#define CIO2_REG_MIPIBE_FORCE_RAW8	(CIO2_REG_MIPIBE_BASE + 0x20)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_ENABLE		BIT(0)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_USE_TYPEID		BIT(1)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_TYPEID_SHIFT		2
+
+#define CIO2_REG_MIPIBE_IRQ_STATUS	(CIO2_REG_MIPIBE_BASE + 0x24)
+#define CIO2_REG_MIPIBE_IRQ_CLEAR	(CIO2_REG_MIPIBE_BASE + 0x28)
+#define CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD (CIO2_REG_MIPIBE_BASE + 0x68)
+#define CIO2_MIPIBE_GLOBAL_LUT_DISREGARD		1
+#define CIO2_REG_MIPIBE_PKT_STALL_STATUS (CIO2_REG_MIPIBE_BASE + 0x6c)
+#define CIO2_REG_MIPIBE_PARSE_GSP_THROUGH_LP_LUT_REG_IDX \
+					(CIO2_REG_MIPIBE_BASE + 0x70)
+#define CIO2_REG_MIPIBE_SP_LUT_ENTRY(vc) \
+				       (CIO2_REG_MIPIBE_BASE + 0x74 + 4 * (vc))
+#define CIO2_REG_MIPIBE_LP_LUT_ENTRY(m)	/* m = 0..15 */ \
+					(CIO2_REG_MIPIBE_BASE + 0x84 + 4 * (m))
+#define CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD		1
+#define CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT		1
+#define CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT		5
+#define CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT	7
+
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_IRQCTRL_BASE */
+/* IRQ registers are 18-bit wide, see cio2_irq_error for bit definitions */
+#define CIO2_REG_IRQCTRL_EDGE		(CIO2_REG_IRQCTRL_BASE + 0x00)
+#define CIO2_REG_IRQCTRL_MASK		(CIO2_REG_IRQCTRL_BASE + 0x04)
+#define CIO2_REG_IRQCTRL_STATUS		(CIO2_REG_IRQCTRL_BASE + 0x08)
+#define CIO2_REG_IRQCTRL_CLEAR		(CIO2_REG_IRQCTRL_BASE + 0x0c)
+#define CIO2_REG_IRQCTRL_ENABLE		(CIO2_REG_IRQCTRL_BASE + 0x10)
+#define CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE	(CIO2_REG_IRQCTRL_BASE + 0x14)
+
+#define CIO2_REG_GPREG_SRST		(CIO2_REG_GPREG_BASE + 0x0)
+#define CIO2_GPREG_SRST_ALL				0xffff	/* Reset all */
+#define CIO2_REG_FB_HPLL_FREQ		(CIO2_REG_GPREG_BASE + 0x08)
+#define CIO2_REG_ISCLK_RATIO		(CIO2_REG_GPREG_BASE + 0xc)
+
+#define CIO2_REG_CGC					0x1400
+#define CIO2_CGC_CSI2_TGE				BIT(0)
+#define CIO2_CGC_PRIM_TGE				BIT(1)
+#define CIO2_CGC_SIDE_TGE				BIT(2)
+#define CIO2_CGC_XOSC_TGE				BIT(3)
+#define CIO2_CGC_MPLL_SHUTDOWN_EN			BIT(4)
+#define CIO2_CGC_D3I3_TGE				BIT(5)
+#define CIO2_CGC_CSI2_INTERFRAME_TGE			BIT(6)
+#define CIO2_CGC_CSI2_PORT_DCGE				BIT(8)
+#define CIO2_CGC_CSI2_DCGE				BIT(9)
+#define CIO2_CGC_SIDE_DCGE				BIT(10)
+#define CIO2_CGC_PRIM_DCGE				BIT(11)
+#define CIO2_CGC_ROSC_DCGE				BIT(12)
+#define CIO2_CGC_XOSC_DCGE				BIT(13)
+#define CIO2_CGC_FLIS_DCGE				BIT(14)
+#define CIO2_CGC_CLKGATE_HOLDOFF_SHIFT			20
+#define CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT		24
+#define CIO2_REG_D0I3C					0x1408
+#define CIO2_D0I3C_I3					BIT(2)	/* Set D0I3 */
+#define CIO2_D0I3C_RR					BIT(3)	/* Restore? */
+#define CIO2_REG_SWRESET				0x140c
+#define CIO2_SWRESET_SWRESET				1
+#define CIO2_REG_SENSOR_ACTIVE				0x1410
+#define CIO2_REG_INT_STS				0x1414
+#define CIO2_REG_INT_STS_EXT_OE				0x1418
+#define CIO2_INT_EXT_OE_DMAOE_SHIFT			0
+#define CIO2_INT_EXT_OE_DMAOE_MASK			0x7ffff
+#define CIO2_INT_EXT_OE_OES_SHIFT			24
+#define CIO2_INT_EXT_OE_OES_MASK	(0xf << CIO2_INT_EXT_OE_OES_SHIFT)
+#define CIO2_REG_INT_EN					0x1420
+#define CIO2_REG_INT_EN_IRQ				(1 << 24)
+#define CIO2_REG_INT_EN_IOS(dma)	(1 << (((dma) >> 1) + 12))
+/*
+ * Interrupt on completion bit, Eg. DMA 0-3 maps to bit 0-3,
+ * DMA4 & DMA5 map to bit 4 ... DMA18 & DMA19 map to bit 11 Et cetera
+ */
+#define CIO2_INT_IOC(dma)	(1 << ((dma) < 4 ? (dma) : ((dma) >> 1) + 2))
+#define CIO2_INT_IOC_SHIFT				0
+#define CIO2_INT_IOC_MASK		(0x7ff << CIO2_INT_IOC_SHIFT)
+#define CIO2_INT_IOS_IOLN(dma)		(1 << (((dma) >> 1) + 12))
+#define CIO2_INT_IOS_IOLN_SHIFT				12
+#define CIO2_INT_IOS_IOLN_MASK		(0x3ff << CIO2_INT_IOS_IOLN_SHIFT)
+#define CIO2_INT_IOIE					BIT(22)
+#define CIO2_INT_IOOE					BIT(23)
+#define CIO2_INT_IOIRQ					BIT(24)
+#define CIO2_REG_INT_EN_EXT_OE				0x1424
+#define CIO2_REG_DMA_DBG				0x1448
+#define CIO2_REG_DMA_DBG_DMA_INDEX_SHIFT		0
+#define CIO2_REG_PBM_ARB_CTRL				0x1460
+#define CIO2_PBM_ARB_CTRL_LANES_DIV			0 /* 4-4-2-2 lanes */
+#define CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT		0
+#define CIO2_PBM_ARB_CTRL_LE_EN				BIT(7)
+#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN		2
+#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT		8
+#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP			480
+#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT		16
+#define CIO2_REG_PBM_WMCTRL1				0x1464
+#define CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT			0
+#define CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT			8
+#define CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT			16
+#define CIO2_PBM_WMCTRL1_TS_COUNT_DISABLE		BIT(31)
+#define CIO2_PBM_WMCTRL1_MIN_2CK	(4 << CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT)
+#define CIO2_PBM_WMCTRL1_MID1_2CK	(16 << CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT)
+#define CIO2_PBM_WMCTRL1_MID2_2CK	(21 << CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT)
+#define CIO2_REG_PBM_WMCTRL2				0x1468
+#define CIO2_PBM_WMCTRL2_HWM_2CK			40
+#define CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT			0
+#define CIO2_PBM_WMCTRL2_LWM_2CK			22
+#define CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT			8
+#define CIO2_PBM_WMCTRL2_OBFFWM_2CK			2
+#define CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT		16
+#define CIO2_PBM_WMCTRL2_TRANSDYN			1
+#define CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT			24
+#define CIO2_PBM_WMCTRL2_DYNWMEN			BIT(28)
+#define CIO2_PBM_WMCTRL2_OBFF_MEM_EN			BIT(29)
+#define CIO2_PBM_WMCTRL2_OBFF_CPU_EN			BIT(30)
+#define CIO2_PBM_WMCTRL2_DRAINNOW			BIT(31)
+#define CIO2_REG_PBM_TS_COUNT				0x146c
+#define CIO2_REG_PBM_FOPN_ABORT				0x1474
+/* below n = 0..3 */
+#define CIO2_PBM_FOPN_ABORT(n)				(0x1 << 8 * (n))
+#define CIO2_PBM_FOPN_FORCE_ABORT(n)			(0x2 << 8 * (n))
+#define CIO2_PBM_FOPN_FRAMEOPEN(n)			(0x8 << 8 * (n))
+#define CIO2_REG_LTRCTRL				0x1480
+#define CIO2_LTRCTRL_LTRDYNEN				BIT(16)
+#define CIO2_LTRCTRL_LTRSTABLETIME_SHIFT		8
+#define CIO2_LTRCTRL_LTRSTABLETIME_MASK			0xff
+#define CIO2_LTRCTRL_LTRSEL1S3				BIT(7)
+#define CIO2_LTRCTRL_LTRSEL1S2				BIT(6)
+#define CIO2_LTRCTRL_LTRSEL1S1				BIT(5)
+#define CIO2_LTRCTRL_LTRSEL1S0				BIT(4)
+#define CIO2_LTRCTRL_LTRSEL2S3				BIT(3)
+#define CIO2_LTRCTRL_LTRSEL2S2				BIT(2)
+#define CIO2_LTRCTRL_LTRSEL2S1				BIT(1)
+#define CIO2_LTRCTRL_LTRSEL2S0				BIT(0)
+#define CIO2_REG_LTRVAL23				0x1484
+#define CIO2_REG_LTRVAL01				0x1488
+#define CIO2_LTRVAL02_VAL_SHIFT				0
+#define CIO2_LTRVAL02_SCALE_SHIFT			10
+#define CIO2_LTRVAL13_VAL_SHIFT				16
+#define CIO2_LTRVAL13_SCALE_SHIFT			26
+
+#define CIO2_LTRVAL0_VAL				175
+/* Value times 1024 ns */
+#define CIO2_LTRVAL0_SCALE				2
+#define CIO2_LTRVAL1_VAL				90
+#define CIO2_LTRVAL1_SCALE				2
+#define CIO2_LTRVAL2_VAL				90
+#define CIO2_LTRVAL2_SCALE				2
+#define CIO2_LTRVAL3_VAL				90
+#define CIO2_LTRVAL3_SCALE				2
+
+#define CIO2_REG_CDMABA(n)		(0x1500 + 0x10 * (n))	/* n = 0..19 */
+#define CIO2_REG_CDMARI(n)		(0x1504 + 0x10 * (n))
+#define CIO2_CDMARI_FBPT_RP_SHIFT			0
+#define CIO2_CDMARI_FBPT_RP_MASK			0xff
+#define CIO2_REG_CDMAC0(n)		(0x1508 + 0x10 * (n))
+#define CIO2_CDMAC0_FBPT_LEN_SHIFT			0
+#define CIO2_CDMAC0_FBPT_WIDTH_SHIFT			8
+#define CIO2_CDMAC0_FBPT_NS				BIT(25)
+#define CIO2_CDMAC0_DMA_INTR_ON_FS			BIT(26)
+#define CIO2_CDMAC0_DMA_INTR_ON_FE			BIT(27)
+#define CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL		BIT(28)
+#define CIO2_CDMAC0_FBPT_FIFO_FULL_FIX_DIS		BIT(29)
+#define CIO2_CDMAC0_DMA_EN				BIT(30)
+#define CIO2_CDMAC0_DMA_HALTED				BIT(31)
+#define CIO2_REG_CDMAC1(n)		(0x150c + 0x10 * (n))
+#define CIO2_CDMAC1_LINENUMINT_SHIFT			0
+#define CIO2_CDMAC1_LINENUMUPDATE_SHIFT			16
+/* n = 0..3 */
+#define CIO2_REG_PXM_PXF_FMT_CFG0(n)	(0x1700 + 0x30 * (n))
+#define CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT			0
+#define CIO2_PXM_PXF_FMT_CFG_SID1_SHIFT			16
+#define CIO2_PXM_PXF_FMT_CFG_PCK_64B			(0 << 0)
+#define CIO2_PXM_PXF_FMT_CFG_PCK_32B			(1 << 0)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_08			(0 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_10			(1 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_12			(2 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_14			(3 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_4PPC			(0 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_RGBA		(1 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_ARGB		(2 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR2		(3 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR3		(4 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_NV16			(5 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_AB		(1 << 7)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_CD		(1 << 8)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_AC		(1 << 9)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_BD		(1 << 10)
+#define CIO2_REG_INT_STS_EXT_IE				0x17e4
+#define CIO2_REG_INT_EN_EXT_IE				0x17e8
+#define CIO2_INT_EXT_IE_ECC_RE(n)			(0x01 << (8 * (n)))
+#define CIO2_INT_EXT_IE_DPHY_NR(n)			(0x02 << (8 * (n)))
+#define CIO2_INT_EXT_IE_ECC_NR(n)			(0x04 << (8 * (n)))
+#define CIO2_INT_EXT_IE_CRCERR(n)			(0x08 << (8 * (n)))
+#define CIO2_INT_EXT_IE_INTERFRAMEDATA(n)		(0x10 << (8 * (n)))
+#define CIO2_INT_EXT_IE_PKT2SHORT(n)			(0x20 << (8 * (n)))
+#define CIO2_INT_EXT_IE_PKT2LONG(n)			(0x40 << (8 * (n)))
+#define CIO2_INT_EXT_IE_IRQ(n)				(0x80 << (8 * (n)))
+#define CIO2_REG_PXM_FRF_CFG(n)				(0x1720 + 0x30 * (n))
+#define CIO2_PXM_FRF_CFG_FNSEL				BIT(0)
+#define CIO2_PXM_FRF_CFG_FN_RST				BIT(1)
+#define CIO2_PXM_FRF_CFG_ABORT				BIT(2)
+#define CIO2_PXM_FRF_CFG_CRC_TH_SHIFT			3
+#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR		BIT(8)
+#define CIO2_PXM_FRF_CFG_MSK_ECC_RE			BIT(9)
+#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE		BIT(10)
+#define CIO2_PXM_FRF_CFG_EVEN_ODD_MODE_SHIFT		11
+#define CIO2_PXM_FRF_CFG_MASK_CRC_THRES			BIT(13)
+#define CIO2_PXM_FRF_CFG_MASK_CSI_ACCEPT		BIT(14)
+#define CIO2_PXM_FRF_CFG_CIOHC_FS_MODE			BIT(15)
+#define CIO2_PXM_FRF_CFG_CIOHC_FRST_FRM_SHIFT		16
+#define CIO2_REG_PXM_SID2BID0(n)			(0x1724 + 0x30 * (n))
+#define CIO2_FB_HPLL_FREQ				0x2
+#define CIO2_ISCLK_RATIO				0xc
+
+#define CIO2_IRQCTRL_MASK				0x3ffff
+
+#define CIO2_INT_EN_EXT_OE_MASK				0x8f0fffff
+
+#define CIO2_CGC_CLKGATE_HOLDOFF			3
+#define CIO2_CGC_CSI_CLKGATE_HOLDOFF			5
+
+#define CIO2_PXM_FRF_CFG_CRC_TH				16
+
+#define CIO2_INT_EN_EXT_IE_MASK				0xffffffff
+
+#define CIO2_DMA_CHAN					0
+
+#define CIO2_CSIRX_DLY_CNT_CLANE_IDX			-1
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A		0
+#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B		0
+#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A		95
+#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B		-8
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A		0
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B		0
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A		85
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B		-2
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT		0x4
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT		0x570
+
+#define CIO2_PMCSR_OFFSET				4
+#define CIO2_PMCSR_D0D3_SHIFT				2
+#define CIO2_PMCSR_D3					0x3
+
+struct cio2_csi2_timing {
+	s32 clk_termen;
+	s32 clk_settle;
+	s32 dat_termen;
+	s32 dat_settle;
+};
+
+struct cio2_buffer {
+	struct vb2_v4l2_buffer vbb;
+	u32 *lop[CIO2_MAX_LOPS];
+	dma_addr_t lop_bus_addr[CIO2_MAX_LOPS];
+	unsigned int offset;
+};
+
+struct csi2_bus_info {
+	u32 port;
+	u32 lanes;
+};
+
+struct cio2_queue {
+	/* mutex to be used by vb2_queue */
+	struct mutex lock;
+	struct media_pipeline pipe;
+	struct csi2_bus_info csi2;
+	struct v4l2_subdev *sensor;
+	void __iomem *csi_rx_base;
+
+	/* Subdev, /dev/v4l-subdevX */
+	struct v4l2_subdev subdev;
+	struct media_pad subdev_pads[CIO2_PADS];
+	struct v4l2_mbus_framefmt subdev_fmt;
+	atomic_t frame_sequence;
+
+	/* Video device, /dev/videoX */
+	struct video_device vdev;
+	struct media_pad vdev_pad;
+	struct v4l2_pix_format_mplane format;
+	struct vb2_queue vbq;
+
+	/* Buffer queue handling */
+	struct cio2_fbpt_entry *fbpt;	/* Frame buffer pointer table */
+	dma_addr_t fbpt_bus_addr;
+	struct cio2_buffer *bufs[CIO2_MAX_BUFFERS];
+	unsigned int bufs_first;	/* Index of the first used entry */
+	unsigned int bufs_next;	/* Index of the first unused entry */
+	atomic_t bufs_queued;
+};
+
+struct cio2_device {
+	struct pci_dev *pci_dev;
+	void __iomem *base;
+	struct v4l2_device v4l2_dev;
+	struct cio2_queue queue[CIO2_QUEUES];
+	struct cio2_queue *cur_queue;
+	/* mutex to be used by video_device */
+	struct mutex lock;
+
+	bool streaming;
+	struct v4l2_async_notifier notifier;
+	struct media_device media_dev;
+
+	/*
+	 * Safety net to catch DMA fetch ahead
+	 * when reaching the end of LOP
+	 */
+	void *dummy_page;
+	/* DMA handle of dummy_page */
+	dma_addr_t dummy_page_bus_addr;
+	/* single List of Pointers (LOP) page */
+	u32 *dummy_lop;
+	/* DMA handle of dummy_lop */
+	dma_addr_t dummy_lop_bus_addr;
+};
+
+/**************** Virtual channel ****************/
+/*
+ * This should come from sensor driver. No
+ * driver interface nor requirement yet.
+ */
+#define SENSOR_VIR_CH_DFLT		0
+
+/**************** FBPT operations ****************/
+#define CIO2_FBPT_SIZE			(CIO2_MAX_BUFFERS * CIO2_MAX_LOPS * \
+					 sizeof(struct cio2_fbpt_entry))
+
+#define CIO2_FBPT_SUBENTRY_UNIT		4
+#define CIO2_PAGE_SIZE			PAGE_SIZE
+
+/* cio2 fbpt first_entry ctrl status */
+#define CIO2_FBPT_CTRL_VALID		BIT(0)
+#define CIO2_FBPT_CTRL_IOC		BIT(1)
+#define CIO2_FBPT_CTRL_IOS		BIT(2)
+#define CIO2_FBPT_CTRL_SUCCXFAIL	BIT(3)
+#define CIO2_FBPT_CTRL_CMPLCODE_SHIFT	4
+
+/*
+ * Frame Buffer Pointer Table(FBPT) entry
+ * each entry describe an output buffer and consists of
+ * several sub-entries
+ */
+struct __packed cio2_fbpt_entry {
+	union {
+		struct __packed {
+			u32 ctrl; /* status ctrl */
+			u16 cur_line_num; /* current line # written to DDR */
+			u16 frame_num; /* updated by DMA upon FE */
+			u32 first_page_offset; /* offset for 1st page in LOP */
+		} first_entry;
+		/* Second entry per buffer */
+		struct __packed {
+			u32 timestamp;
+			u32 num_of_bytes;
+			/* the number of bytes for write on last page */
+			u16 last_page_available_bytes;
+			/* the number of pages allocated for this buf */
+			u16 num_of_pages;
+		} second_entry;
+	};
+	u32 lop_page_addr;	/* Points to list of pointers (LOP) table */
+};
+
+static inline struct cio2_queue *file_to_cio2_queue(struct file *file)
+{
+	return container_of(video_devdata(file), struct cio2_queue, vdev);
+}
+
+static inline struct cio2_queue *vb2q_to_cio2_queue(struct vb2_queue *vq)
+{
+	return container_of(vq, struct cio2_queue, vbq);
+}
+
+#endif