sh: Add some missing board headers.

Some of these were dropped in the header directory rework, add
the few missing ones back in.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

include/asm-sh/edosk7705.h

+/*
+ * include/asm-sh/edosk7705/io.h
+ *
+ * Modified version of io_se.h for the EDOSK7705 specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi EDOSK7705 development board
+ */
+
+#ifndef __ASM_SH_EDOSK7705_IO_H
+#define __ASM_SH_EDOSK7705_IO_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char sh_edosk7705_inb(unsigned long port);
+extern unsigned int sh_edosk7705_inl(unsigned long port);
+
+extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
+extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
+
+extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
+
+#endif /* __ASM_SH_EDOSK7705_IO_H */

include/asm-sh/hp6xx.h

+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#define HP680_BTN_IRQ		IRQ0_IRQ
+#define HP680_TS_IRQ		IRQ3_IRQ
+#define HP680_HD64461_IRQ	IRQ4_IRQ
+
+#define DAC_LCD_BRIGHTNESS	0
+#define DAC_SPEAKER_VOLUME	1
+
+#define PGDR_OPENED		0x01
+#define PGDR_MAIN_BATTERY_OUT	0x04
+#define PGDR_PLAY_BUTTON	0x08
+#define PGDR_REWIND_BUTTON	0x10
+#define PGDR_RECORD_BUTTON	0x20
+
+#define PHDR_TS_PEN_DOWN	0x08
+
+#define PJDR_LED_BLINK		0x02
+
+#define PKDR_LED_GREEN		0x10
+
+#define SCPDR_TS_SCAN_ENABLE	0x20
+#define SCPDR_TS_SCAN_Y		0x02
+#define SCPDR_TS_SCAN_X		0x01
+
+#define SCPCR_TS_ENABLE		0x405
+#define SCPCR_TS_MASK		0xc0f
+
+#define ADC_CHANNEL_TS_Y	1
+#define ADC_CHANNEL_TS_X	2
+#define ADC_CHANNEL_BATTERY	3
+#define ADC_CHANNEL_BACKUP	4
+#define ADC_CHANNEL_CHARGE	5
+
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
+#define HD64461_GPBDR_LED_RED	0x80
+
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR	0xa4000130
+#define PKDR	0xa4000132
+
+static inline void hp6xx_led_red(int on)
+{
+	u16 v16;
+	v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+	if (on)
+	    ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+	else
+	    ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+}
+
+static inline void hp6xx_led_green(int on)
+{
+	u8 v8;
+
+	v8 = ctrl_inb(PKDR);
+	if (on)
+	    ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR);
+	else
+	    ctrl_outb(v8 | PKDR_LED_GREEN, PKDR);
+}
+
+
+#endif /* __ASM_SH_HP6XX_H */

include/asm-sh/hs7751rvoip.h

+#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
+#define __ASM_SH_RENESAS_HS7751RVOIP_H
+
+/*
+ * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales HS7751RVoIP support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SLICCNTR1	0xa4000006	/* SLIC PIO Control 1 */
+#define PA_SLICCNTR2	0xa4000008	/* SLIC PIO Control 2 */
+#define PA_DMACNTR	0xa400000a	/* USB DMA Control */
+#define PA_INPORTR	0xa400000c	/* Input Port Register */
+#define PA_OUTPORTR	0xa400000e	/* Output Port Reguster */
+#define PA_VERREG	0xa4000014	/* FPGA Version Register */
+
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+#define IRLCNTR2	(PA_BCR + 2)	/* Interrupt Control Register2 */
+#define IRLCNTR3	(PA_BCR + 4)	/* Interrupt Control Register3 */
+#define IRLCNTR4	(PA_BCR + 16)	/* Interrupt Control Register4 */
+#define IRLCNTR5	(PA_BCR + 18)	/* Interrupt Control Register5 */
+
+#define IRQ_PCIETH	6		/* PCI Ethernet IRQ */
+#define IRQ_PCIHUB	7		/* PCI Ethernet Hub IRQ */
+#define IRQ_USBCOM	8		/* USB Comunication IRQ */
+#define IRQ_USBCON	9		/* USB Connect IRQ */
+#define IRQ_USBDMA	10		/* USB DMA IRQ */
+#define IRQ_CFCARD	11		/* CF Card IRQ */
+#define IRQ_PCMCIA	12		/* PCMCIA IRQ */
+#define IRQ_PCISLOT	13		/* PCI Slot #1 IRQ */
+#define IRQ_ONHOOK1	0		/* ON HOOK1 IRQ */
+#define IRQ_OFFHOOK1	1		/* OFF HOOK1 IRQ */
+#define IRQ_ONHOOK2	2		/* ON HOOK2 IRQ */
+#define IRQ_OFFHOOK2	3		/* OFF HOOK2 IRQ */
+#define	IRQ_RINGING	4		/* Ringing IRQ */
+#define	IRQ_CODEC	5		/* CODEC IRQ */
+
+#define __IO_PREFIX	hs7751rvoip
+#include <asm/io_generic.h>
+
+/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
+void init_hs7751rvoip_IRQ(void);
+
+/* arch/sh/boards/renesas/hs7751rvoip/io.c */
+void *hs7751rvoip_ioremap(unsigned long, unsigned long);
+
+#endif  /* __ASM_SH_RENESAS_HS7751RVOIP */

include/asm-sh/r7780rp.h

+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/*
+ * linux/include/asm-sh/r7780rp.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Solutions Highlander R7780RP support
+ */
+
+/* Box specific addresses.  */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_ICCR         (PA_BCR+0x0600) /* Serial control */
+#define PA_SAR          (PA_BCR+0x0602) /* Serial Slave control */
+#define PA_MDR          (PA_BCR+0x0604) /* Serial Mode control */
+#define PA_ADR1         (PA_BCR+0x0606) /* Serial Address1 control */
+#define PA_DAR1         (PA_BCR+0x0646) /* Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define PA_AX88796L     0xa4100400      /* AX88796L Area */
+#define PA_SC1602BSLB   0xa6000000      /* SC1602BSLB Area */
+#define PA_IDE_OFFSET   0x1f0           /* CF IDE Offset */
+#define AX88796L_IO_BASE        0x1000  /* AX88796L IO Base Address */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+
+#define IRQ_PCISLOT1    65              /* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2    66              /* PCI Slot #2 IRQ */
+#define IRQ_PCISLOT3    67              /* PCI Slot #3 IRQ */
+#define IRQ_PCISLOT4    68              /* PCI Slot #4 IRQ */
+#define IRQ_CFCARD      1               /* CF Card IRQ */
+// #define IRQ_CFINST   0               /* CF Card Insert IRQ */
+#define IRQ_TP          2               /* Touch Panel IRQ */
+#define IRQ_SCI1        3               /* SCI1 IRQ */
+#define IRQ_SCI0        4               /* SCI0 IRQ */
+#define IRQ_2SERIAL     5               /* Serial IRQ */
+#define IRQ_RTC         6               /* RTC A / B IRQ */
+#define IRQ_EXTENTION6  7               /* EXT6n IRQ */
+#define IRQ_EXTENTION5  8               /* EXT5n IRQ */
+#define IRQ_EXTENTION4  9               /* EXT4n IRQ */
+#define IRQ_EXTENTION2  10              /* EXT2n IRQ */
+#define IRQ_EXTENTION1  11              /* EXT1n IRQ */
+#define IRQ_ONETH       13              /* On board Ethernet IRQ */
+#define IRQ_PSW         14              /* Push Switch IRQ */
+
+#else /* R7780RP */
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_ICCR		(PA_BCR+0x0500)	/* Serial control */
+#define PA_SAR		(PA_BCR+0x0502)	/* Serial Slave control */
+#define PA_MDR		(PA_BCR+0x0504)	/* Serial Mode control */
+#define PA_ADR1		(PA_BCR+0x0506)	/* Serial Address1 control */
+#define PA_DAR1		(PA_BCR+0x0546)	/* Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IRQ_PCISLOT1	0		/* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2	1		/* PCI Slot #2 IRQ */
+#define IRQ_PCISLOT3	2		/* PCI Slot #3 IRQ */
+#define IRQ_PCISLOT4	3		/* PCI Slot #4 IRQ */
+#define IRQ_CFCARD	4		/* CF Card IRQ */
+#define IRQ_CFINST	5		/* CF Card Insert IRQ */
+#define IRQ_M66596	6		/* M66596 IRQ */
+#define IRQ_SDCARD	7		/* SD Card IRQ */
+#define IRQ_TUCHPANEL	8		/* Touch Panel IRQ */
+#define IRQ_SCI		9		/* SCI IRQ */
+#define IRQ_2SERIAL	10		/* Serial IRQ */
+#define	IRQ_EXTENTION	11		/* EXTn IRQ */
+#define IRQ_ONETH	12		/* On board Ethernet IRQ */
+#define IRQ_PSW		13		/* Push Switch IRQ */
+#define IRQ_ZIGBEE	14		/* Ziggbee IO IRQ */
+
+#endif  /* CONFIG_SH_R7780MP */
+
+#define __IO_PREFIX	r7780rp
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */

include/asm-sh/rts7751r2d.h

+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
+#define PA_CFCTL	0xa4000004	/* CF Timing control */
+#define PA_CFPOW	0xa4000006	/* CF Power control */
+#define PA_DISPCTL	0xa4000008	/* Display Timing control */
+#define PA_SDMPOW	0xa400000a	/* SD Power control */
+#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
+#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
+#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
+#if defined(CONFIG_RTS7751R2D_REV11)
+#define PA_AXRST	0xa4000022	/* AX_LAN Reset control */
+#define PA_CFRST	0xa4000024	/* CF Reset control */
+#define	PA_ADMRTS	0xa4000026	/* SD Reset control */
+#define PA_EXTRST	0xa4000028	/* Extention Reset control */
+#define PA_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
+#else
+#define PA_CFRST	0xa4000022	/* CF Reset control */
+#define	PA_ADMRTS	0xa4000024	/* SD Reset control */
+#define PA_EXTRST	0xa4000026	/* Extention Reset control */
+#define PA_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
+#define	PA_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
+#endif
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_VERREG	0xa4000032	/* FPGA Version Register */
+#define PA_INPORT	0xa4000034	/* KEY Input Port control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+#define PA_DMPORT	0xa4000038	/* DM270 Output Port control */
+
+#define PA_AX88796L	0xaa000400	/* AX88796L Area */
+#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#if defined(CONFIG_RTS7751R2D_REV11)
+#define IRQ_PCIETH	0		/* PCI Ethernet IRQ */
+#define IRQ_CFCARD	1		/* CF Card IRQ */
+#define IRQ_CFINST	2		/* CF Card Insert IRQ */
+#define IRQ_PCMCIA	3		/* PCMCIA IRQ */
+#define IRQ_VOYAGER	4		/* VOYAGER IRQ */
+#define IRQ_ONETH	5		/* On board Ethernet IRQ */
+#else
+#define IRQ_KEYIN	0		/* Key Input IRQ */
+#define IRQ_PCIETH	1		/* PCI Ethernet IRQ */
+#define IRQ_CFCARD	2		/* CF Card IRQ */
+#define IRQ_CFINST	3		/* CF Card Insert IRQ */
+#define IRQ_PCMCIA	4		/* PCMCIA IRQ */
+#define IRQ_VOYAGER	5		/* VOYAGER IRQ */
+#endif
+#define IRQ_RTCALM	6		/* RTC Alarm IRQ */
+#define IRQ_RTCTIME	7		/* RTC Timer IRQ */
+#define IRQ_SDCARD	8		/* SD Card IRQ */
+#define IRQ_PCISLOT1	9		/* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2	10		/* PCI Slot #2 IRQ */
+#define	IRQ_EXTENTION	11		/* EXTn IRQ */
+
+#define __IO_PREFIX rts7751r2d
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_RTS7751R2D */

include/asm-sh/shmin.h

+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif