提交 c203f677 编写于 作者: V Vinod Koul

Merge branch 'topic/qcom' into for-linus

......@@ -47,8 +47,8 @@ When the OS is not in control of the management interface (i.e. it's a guest),
the channel nodes appear on their own, not under a management node.
Required properties:
- compatible: must contain "qcom,hidma-1.0" for initial HW or "qcom,hidma-1.1"
for MSI capable HW.
- compatible: must contain "qcom,hidma-1.0" for initial HW or
"qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
- reg: Addresses for the transfer and event channel
- interrupts: Should contain the event interrupt
- desc-count: Number of asynchronous requests this channel can handle
......
......@@ -50,6 +50,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/of_dma.h>
#include <linux/of_device.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/acpi.h>
......@@ -104,6 +105,10 @@ static unsigned int nr_desc_prm;
module_param(nr_desc_prm, uint, 0644);
MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
enum hidma_cap {
HIDMA_MSI_CAP = 1,
HIDMA_IDENTITY_CAP,
};
/* process completed descriptors */
static void hidma_process_completed(struct hidma_chan *mchan)
......@@ -736,25 +741,12 @@ static int hidma_request_msi(struct hidma_dev *dmadev,
#endif
}
static bool hidma_msi_capable(struct device *dev)
static bool hidma_test_capability(struct device *dev, enum hidma_cap test_cap)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
const char *of_compat;
int ret = -EINVAL;
if (!adev || acpi_disabled) {
ret = device_property_read_string(dev, "compatible",
&of_compat);
if (ret)
return false;
enum hidma_cap cap;
ret = strcmp(of_compat, "qcom,hidma-1.1");
} else {
#ifdef CONFIG_ACPI
ret = strcmp(acpi_device_hid(adev), "QCOM8062");
#endif
}
return ret == 0;
cap = (enum hidma_cap) device_get_match_data(dev);
return cap ? ((cap & test_cap) > 0) : 0;
}
static int hidma_probe(struct platform_device *pdev)
......@@ -834,8 +826,7 @@ static int hidma_probe(struct platform_device *pdev)
* Determine the MSI capability of the platform. Old HW doesn't
* support MSI.
*/
msi = hidma_msi_capable(&pdev->dev);
msi = hidma_test_capability(&pdev->dev, HIDMA_MSI_CAP);
device_property_read_u32(&pdev->dev, "desc-count",
&dmadev->nr_descriptors);
......@@ -848,7 +839,10 @@ static int hidma_probe(struct platform_device *pdev)
if (!dmadev->nr_descriptors)
dmadev->nr_descriptors = HIDMA_NR_DEFAULT_DESC;
dmadev->chidx = readl(dmadev->dev_trca + 0x28);
if (hidma_test_capability(&pdev->dev, HIDMA_IDENTITY_CAP))
dmadev->chidx = readl(dmadev->dev_trca + 0x40);
else
dmadev->chidx = readl(dmadev->dev_trca + 0x28);
/* Set DMA mask to 64 bits. */
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
......@@ -953,7 +947,8 @@ static int hidma_remove(struct platform_device *pdev)
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id hidma_acpi_ids[] = {
{"QCOM8061"},
{"QCOM8062"},
{"QCOM8062", HIDMA_MSI_CAP},
{"QCOM8063", (HIDMA_MSI_CAP | HIDMA_IDENTITY_CAP)},
{},
};
MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
......@@ -961,7 +956,9 @@ MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
{.compatible = "qcom,hidma-1.1",},
{.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
{.compatible = "qcom,hidma-1.2",
.data = (void *)(HIDMA_MSI_CAP | HIDMA_IDENTITY_CAP),},
{},
};
MODULE_DEVICE_TABLE(of, hidma_match);
......
......@@ -393,6 +393,8 @@ static int hidma_ll_reset(struct hidma_lldev *lldev)
*/
static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
{
unsigned long irqflags;
if (cause & HIDMA_ERR_INT_MASK) {
dev_err(lldev->dev, "error 0x%x, disabling...\n",
cause);
......@@ -410,6 +412,10 @@ static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
return;
}
spin_lock_irqsave(&lldev->lock, irqflags);
writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
spin_unlock_irqrestore(&lldev->lock, irqflags);
/*
* Fine tuned for this HW...
*
......@@ -421,9 +427,6 @@ static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
* Try to consume as many EVREs as possible.
*/
hidma_handle_tre_completion(lldev);
/* We consumed TREs or there are pending TREs or EVREs. */
writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
}
irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册