b43: HT-PHY: calibrate radio after switching channel

After uploading radio values calibration goes in. In MMIO dump it is:
 radio_read(0x002b) -> 0x0008
radio_write(0x002b) <- 0x0008
 radio_read(0x002e) -> 0x0004
radio_write(0x002e) <- 0x0000
 radio_read(0x002e) -> 0x0000
radio_write(0x002e) <- 0x0004
 radio_read(0x002b) -> 0x0008
radio_write(0x002b) <- 0x0009
To find masks and sets, MMIO hacks were used to fool closed driver.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_ht.c

@@ -69,7 +69,13 @@ static void b43_radio_2059_channel_setup(struct b43_wldev *dev,
 
 	udelay(50);
 
-	/* TODO */
+	/* Calibration */
+	b43_radio_mask(dev, 0x2b, ~0x1);
+	b43_radio_mask(dev, 0x2e, ~0x4);
+	b43_radio_set(dev, 0x2e, 0x4);
+	b43_radio_set(dev, 0x2b, 0x1);
+
+	udelay(300);
 }
 
 static void b43_phy_ht_channel_setup(struct b43_wldev *dev,