提交 c0c11512 编写于 作者: J James Smart 提交者: James Bottomley

[SCSI] lpfc 8.3.24: Extended hardware support and support dump images

Extended hardware support and support dump images:
- Make the size to be MAILBOX_SYSFS_MAX (4096) so that it allows the maximum
  sysfs binary access interface possible.
- Add ids and model names for new hardware
- Add capability of inducing SLI4 firmware dump obj file
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <jbottomley@parallels.com>
上级 0558056c
......@@ -754,6 +754,61 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
return status;
}
/**
* lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump
* @phba: lpfc_hba pointer.
*
* Description:
* Request SLI4 interface type-2 device to perform a dump of firmware dump
* object into it's /dbg directory of the flash file system.
*
* Returns:
* zero for success
**/
static ssize_t
lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
{
struct completion online_compl;
uint32_t reg_val;
int status = 0;
int rc;
if (!phba->cfg_enable_hba_reset)
return -EIO;
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
return status;
/* wait for the device to be quiesced before firmware reset */
msleep(100);
reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
reg_val |= LPFC_FW_DUMP_REQUEST;
writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
/* flush */
readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
/* delay driver action following IF_TYPE_2 reset */
msleep(100);
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_ONLINE);
if (rc == 0)
return -ENOMEM;
wait_for_completion(&online_compl);
if (status != 0)
return -EIO;
return 0;
}
/**
* lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
......@@ -848,6 +903,13 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
return -EINVAL;
else
status = lpfc_do_offline(phba, LPFC_EVT_KILL);
else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
if ((phba->sli_rev < LPFC_SLI_REV4) ||
(bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
LPFC_SLI_INTF_IF_TYPE_2))
return -EPERM;
else
status = lpfc_sli4_fw_dump_request(phba);
else
return -EINVAL;
......@@ -3961,7 +4023,7 @@ static struct bin_attribute sysfs_mbox_attr = {
.name = "mbox",
.mode = S_IRUSR | S_IWUSR,
},
.size = MAILBOX_CMD_SIZE,
.size = MAILBOX_SYSFS_MAX,
.read = sysfs_mbox_read,
.write = sysfs_mbox_write,
};
......
......@@ -1199,7 +1199,9 @@ typedef struct {
#define PCI_DEVICE_ID_BALIUS 0xe131
#define PCI_DEVICE_ID_PROTEUS_PF 0xe180
#define PCI_DEVICE_ID_LANCER_FC 0xe200
#define PCI_DEVICE_ID_LANCER_FC_VF 0xe208
#define PCI_DEVICE_ID_LANCER_FCOE 0xe260
#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268
#define PCI_DEVICE_ID_SAT_SMB 0xf011
#define PCI_DEVICE_ID_SAT_MID 0xf015
#define PCI_DEVICE_ID_RFLY 0xf095
......@@ -3021,7 +3023,7 @@ typedef struct {
#define MAILBOX_EXT_SIZE (MAILBOX_EXT_WSIZE * sizeof(uint32_t))
#define MAILBOX_HBA_EXT_OFFSET 0x100
/* max mbox xmit size is a page size for sysfs IO operations */
#define MAILBOX_MAX_XMIT_SIZE PAGE_SIZE
#define MAILBOX_SYSFS_MAX 4096
typedef union {
uint32_t varWords[MAILBOX_CMD_WSIZE - 1]; /* first word is type/
......
......@@ -170,6 +170,25 @@ struct lpfc_sli_intf {
#define LPFC_PCI_FUNC3 3
#define LPFC_PCI_FUNC4 4
/* SLI4 interface type-2 control register offsets */
#define LPFC_CTL_PORT_SEM_OFFSET 0x400
#define LPFC_CTL_PORT_STA_OFFSET 0x404
#define LPFC_CTL_PORT_CTL_OFFSET 0x408
#define LPFC_CTL_PORT_ER1_OFFSET 0x40C
#define LPFC_CTL_PORT_ER2_OFFSET 0x410
#define LPFC_CTL_PDEV_CTL_OFFSET 0x414
/* Some SLI4 interface type-2 PDEV_CTL register bits */
#define LPFC_CTL_PDEV_CTL_DRST 0x00000001
#define LPFC_CTL_PDEV_CTL_FRST 0x00000002
#define LPFC_CTL_PDEV_CTL_DD 0x00000004
#define LPFC_CTL_PDEV_CTL_LC 0x00000008
#define LPFC_CTL_PDEV_CTL_FRL_ALL 0x00
#define LPFC_CTL_PDEV_CTL_FRL_FC_FCOE 0x10
#define LPFC_CTL_PDEV_CTL_FRL_NIC 0x20
#define LPFC_FW_DUMP_REQUEST (LPFC_CTL_PDEV_CTL_DD | LPFC_CTL_PDEV_CTL_FRST)
/* Active interrupt test count */
#define LPFC_ACT_INTR_CNT 4
......
......@@ -1784,7 +1784,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
&& descp && descp[0] != '\0')
return;
if (phba->lmt & LMT_10Gb)
if (phba->lmt & LMT_16Gb)
max_speed = 16;
else if (phba->lmt & LMT_10Gb)
max_speed = 10;
else if (phba->lmt & LMT_8Gb)
max_speed = 8;
......@@ -1951,12 +1953,13 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
"Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LANCER_FC:
oneConnect = 1;
m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"};
case PCI_DEVICE_ID_LANCER_FC_VF:
m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LANCER_FCOE:
case PCI_DEVICE_ID_LANCER_FCOE_VF:
oneConnect = 1;
m = (typeof(m)){"Undefined", "PCIe", "FCoE"};
m = (typeof(m)){"OCe50100", "PCIe", "FCoE"};
break;
default:
m = (typeof(m)){"Unknown", "", ""};
......@@ -1965,7 +1968,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
if (mdp && mdp[0] == '\0')
snprintf(mdp, 79,"%s", m.name);
/* oneConnect hba requires special processing, they are all initiators
/*
* oneConnect hba requires special processing, they are all initiators
* and we put the port number on the end
*/
if (descp && descp[0] == '\0') {
......@@ -9580,6 +9584,10 @@ static struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC_VF,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册