提交 c0725502 编写于 作者: D David S. Miller

Revert "net: usb: asix88179_178a: de-duplicate code"

This reverts commit cf29bded.

It causes regressions.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 ec125890
......@@ -1223,7 +1223,7 @@ static int ax88179_led_setting(struct usbnet *dev)
return 0;
}
static int ax88179_link_bind_or_reset(struct usbnet *dev, bool do_reset)
static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
{
u8 buf[5];
u16 *tmp16;
......@@ -1231,11 +1231,12 @@ static int ax88179_link_bind_or_reset(struct usbnet *dev, bool do_reset)
struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
struct ethtool_eee eee_data;
usbnet_get_endpoints(dev, intf);
tmp16 = (u16 *)buf;
tmp = (u8 *)buf;
if (!do_reset)
memset(ax179_data, 0, sizeof(*ax179_data));
memset(ax179_data, 0, sizeof(*ax179_data));
/* Power up ethernet PHY */
*tmp16 = 0;
......@@ -1248,13 +1249,9 @@ static int ax88179_link_bind_or_reset(struct usbnet *dev, bool do_reset)
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
msleep(100);
if (do_reset)
ax88179_auto_detach(dev, 0);
ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
ETH_ALEN, dev->net->dev_addr);
if (!do_reset)
memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
/* RX bulk configuration */
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
......@@ -1269,21 +1266,19 @@ static int ax88179_link_bind_or_reset(struct usbnet *dev, bool do_reset)
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
1, 1, tmp);
if (!do_reset) {
dev->net->netdev_ops = &ax88179_netdev_ops;
dev->net->ethtool_ops = &ax88179_ethtool_ops;
dev->net->needed_headroom = 8;
dev->net->max_mtu = 4088;
/* Initialize MII structure */
dev->mii.dev = dev->net;
dev->mii.mdio_read = ax88179_mdio_read;
dev->mii.mdio_write = ax88179_mdio_write;
dev->mii.phy_id_mask = 0xff;
dev->mii.reg_num_mask = 0xff;
dev->mii.phy_id = 0x03;
dev->mii.supports_gmii = 1;
}
dev->net->netdev_ops = &ax88179_netdev_ops;
dev->net->ethtool_ops = &ax88179_ethtool_ops;
dev->net->needed_headroom = 8;
dev->net->max_mtu = 4088;
/* Initialize MII structure */
dev->mii.dev = dev->net;
dev->mii.mdio_read = ax88179_mdio_read;
dev->mii.mdio_write = ax88179_mdio_write;
dev->mii.phy_id_mask = 0xff;
dev->mii.reg_num_mask = 0xff;
dev->mii.phy_id = 0x03;
dev->mii.supports_gmii = 1;
dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_RXCSUM;
......@@ -1335,13 +1330,6 @@ static int ax88179_link_bind_or_reset(struct usbnet *dev, bool do_reset)
return 0;
}
static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
{
usbnet_get_endpoints(dev, intf);
return ax88179_link_bind_or_reset(dev, false);
}
static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
{
u16 tmp16;
......@@ -1470,7 +1458,74 @@ ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
static int ax88179_link_reset(struct usbnet *dev)
{
return ax88179_link_bind_or_reset(dev, true);
struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
u8 tmp[5], link_sts;
u16 mode, tmp16, delay = HZ / 10;
u32 tmp32 = 0x40000000;
unsigned long jtimeout;
jtimeout = jiffies + delay;
while (tmp32 & 0x40000000) {
mode = 0;
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &mode);
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2,
&ax179_data->rxctl);
/*link up, check the usb device control TX FIFO full or empty*/
ax88179_read_cmd(dev, 0x81, 0x8c, 0, 4, &tmp32);
if (time_after(jiffies, jtimeout))
return 0;
}
mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
AX_MEDIUM_RXFLOW_CTRLEN;
ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
1, 1, &link_sts);
ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
GMII_PHY_PHYSR, 2, &tmp16);
if (!(tmp16 & GMII_PHY_PHYSR_LINK)) {
return 0;
} else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ;
if (dev->net->mtu > 1500)
mode |= AX_MEDIUM_JUMBO_EN;
if (link_sts & AX_USB_SS)
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
else if (link_sts & AX_USB_HS)
memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
else
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
} else if (GMII_PHY_PHYSR_100 == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
mode |= AX_MEDIUM_PS;
if (link_sts & (AX_USB_SS | AX_USB_HS))
memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
else
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
} else {
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
}
/* RX bulk configuration */
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
dev->rx_urb_size = (1024 * (tmp[3] + 2));
if (tmp16 & GMII_PHY_PHYSR_FULL)
mode |= AX_MEDIUM_FULL_DUPLEX;
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, &mode);
ax179_data->eee_enabled = ax88179_chk_eee(dev);
netif_carrier_on(dev->net);
return 0;
}
static int ax88179_reset(struct usbnet *dev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册