提交 bfd8303a 编写于 作者: D Daniel Vetter 提交者: Dave Airlie

drm: Kill DRM_HZ

We don't have any userspace interfaces that use HZ as a time unit, so
having our own DRM define is useless.

Remove this remnant from the shared drm core days.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 d2e546b8
......@@ -960,7 +960,7 @@ void drm_vblank_put(struct drm_device *dev, int crtc)
if (atomic_dec_and_test(&dev->vblank[crtc].refcount) &&
(drm_vblank_offdelay > 0))
mod_timer(&dev->vblank_disable_timer,
jiffies + ((drm_vblank_offdelay * DRM_HZ)/1000));
jiffies + ((drm_vblank_offdelay * HZ)/1000));
}
EXPORT_SYMBOL(drm_vblank_put);
......@@ -1244,7 +1244,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
vblwait->request.sequence, crtc);
dev->vblank[crtc].last_wait = vblwait->request.sequence;
DRM_WAIT_ON(ret, dev->vblank[crtc].queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, dev->vblank[crtc].queue, 3 * HZ,
(((drm_vblank_count(dev, crtc) -
vblwait->request.sequence) <= (1 << 23)) ||
!dev->irq_enabled));
......
......@@ -868,7 +868,7 @@ static void mixer_wait_for_vblank(void *ctx)
*/
if (!wait_event_timeout(mixer_ctx->wait_vsync_queue,
!atomic_read(&mixer_ctx->wait_vsync_event),
DRM_HZ/20))
HZ/20))
DRM_DEBUG_KMS("vblank wait timed out.\n");
}
......
......@@ -326,7 +326,7 @@ int psbfb_sync(struct fb_info *info)
struct psb_framebuffer *psbfb = &fbdev->pfb;
struct drm_device *dev = psbfb->base.dev;
struct drm_psb_private *dev_priv = dev->dev_private;
unsigned long _end = jiffies + DRM_HZ;
unsigned long _end = jiffies + HZ;
int busy = 0;
unsigned long flags;
......
......@@ -212,8 +212,8 @@ enum {
#define PSB_HIGH_REG_OFFS 0x0600
#define PSB_NUM_VBLANKS 2
#define PSB_WATCHDOG_DELAY (DRM_HZ * 2)
#define PSB_LID_DELAY (DRM_HZ / 10)
#define PSB_WATCHDOG_DELAY (HZ * 2)
#define PSB_LID_DELAY (HZ / 10)
#define MDFLD_PNW_B0 0x04
#define MDFLD_PNW_C0 0x08
......@@ -232,7 +232,7 @@ enum {
#define MDFLD_DSR_RR 45
#define MDFLD_DPU_ENABLE (1 << 31)
#define MDFLD_DSR_FULLSCREEN (1 << 30)
#define MDFLD_DSR_DELAY (DRM_HZ / MDFLD_DSR_RR)
#define MDFLD_DSR_DELAY (HZ / MDFLD_DSR_RR)
#define PSB_PWR_STATE_ON 1
#define PSB_PWR_STATE_OFF 2
......
......@@ -456,7 +456,7 @@ static int psb_vblank_do_wait(struct drm_device *dev,
{
unsigned int cur_vblank;
int ret = 0;
DRM_WAIT_ON(ret, dev->vblank.queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, dev->vblank.queue, 3 * HZ,
(((cur_vblank = atomic_read(counter))
- *sequence) <= (1 << 23)));
*sequence = cur_vblank;
......
......@@ -783,7 +783,7 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
if (ring->irq_get(ring)) {
DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, ring->irq_queue, 3 * HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
ring->irq_put(ring);
} else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000))
......
......@@ -128,7 +128,7 @@ int mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence)
* by about a day rather than she wants to wait for years
* using fences.
*/
DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * HZ,
(((cur_fence = atomic_read(&dev_priv->last_fence_retired))
- *sequence) <= (1 << 23)));
......
......@@ -143,7 +143,7 @@ nouveau_fence_emit(struct nouveau_fence *fence, struct nouveau_channel *chan)
int ret;
fence->channel = chan;
fence->timeout = jiffies + (15 * DRM_HZ);
fence->timeout = jiffies + (15 * HZ);
fence->sequence = ++fctx->sequence;
ret = fctx->emit(fence);
......
......@@ -249,7 +249,7 @@ static int radeon_wait_irq(struct drm_device * dev, int swi_nr)
dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
DRM_WAIT_ON(ret, dev_priv->swi_queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, dev_priv->swi_queue, 3 * HZ,
RADEON_READ(RADEON_LAST_SWI_REG) >= swi_nr);
return ret;
......
......@@ -266,7 +266,7 @@ int sis_idle(struct drm_device *dev)
* because its polling frequency is too low.
*/
end = jiffies + (DRM_HZ * 3);
end = jiffies + (HZ * 3);
for (i = 0; i < 4; ++i) {
do {
......
......@@ -363,7 +363,7 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
via_abort_dmablit(dev, engine);
blitq->aborting = 1;
blitq->end = jiffies + DRM_HZ;
blitq->end = jiffies + HZ;
}
if (!blitq->is_active) {
......@@ -372,7 +372,7 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
blitq->is_active = 1;
blitq->cur = cur;
blitq->num_outstanding--;
blitq->end = jiffies + DRM_HZ;
blitq->end = jiffies + HZ;
if (!timer_pending(&blitq->poll_timer))
mod_timer(&blitq->poll_timer, jiffies + 1);
} else {
......@@ -436,7 +436,7 @@ via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
int ret = 0;
if (via_dmablit_active(blitq, engine, handle, &queue)) {
DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, *queue, 3 * HZ,
!via_dmablit_active(blitq, engine, handle, NULL));
}
DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
......@@ -688,7 +688,7 @@ via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
while (blitq->num_free == 0) {
spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0);
DRM_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0);
if (ret)
return (-EINTR == ret) ? -EAGAIN : ret;
......
......@@ -239,12 +239,12 @@ via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence
cur_irq = dev_priv->via_irqs + real_irq;
if (masks[real_irq][2] && !force_sequence) {
DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
((VIA_READ(masks[irq][2]) & masks[irq][3]) ==
masks[irq][4]));
cur_irq_sequence = atomic_read(&cur_irq->irq_received);
} else {
DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * DRM_HZ,
DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
(((cur_irq_sequence =
atomic_read(&cur_irq->irq_received)) -
*sequence) <= (1 << 23)));
......
......@@ -83,7 +83,7 @@ int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_
switch (fx->func) {
case VIA_FUTEX_WAIT:
DRM_WAIT_ON(ret, dev_priv->decoder_queue[fx->lock],
(fx->ms / 10) * (DRM_HZ / 100), *lock != fx->val);
(fx->ms / 10) * (HZ / 100), *lock != fx->val);
return ret;
case VIA_FUTEX_WAKE:
DRM_WAKEUP(&(dev_priv->decoder_queue[fx->lock]));
......
......@@ -58,8 +58,6 @@ static inline void writeq(u64 val, void __iomem *reg)
#define DRM_COPY_TO_USER(arg1, arg2, arg3) \
copy_to_user(arg1, arg2, arg3)
#define DRM_HZ HZ
#define DRM_WAIT_ON( ret, queue, timeout, condition ) \
do { \
DECLARE_WAITQUEUE(entry, current); \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册