提交 bfd4e66b 编写于 作者: T Takashi Iwai

Merge branches 'topic/asoc', 'topic/misc-fixes' and 'topic/hda' into for-linus

......@@ -159,7 +159,7 @@ static int i2sbus_add_dev(struct macio_dev *macio,
struct i2sbus_dev *dev;
struct device_node *child = NULL, *sound = NULL;
struct resource *r;
int i, layout = 0, rlen;
int i, layout = 0, rlen, ok = force;
static const char *rnames[] = { "i2sbus: %s (control)",
"i2sbus: %s (tx)",
"i2sbus: %s (rx)" };
......@@ -192,7 +192,7 @@ static int i2sbus_add_dev(struct macio_dev *macio,
layout = *layout_id;
snprintf(dev->sound.modalias, 32,
"sound-layout-%d", layout);
force = 1;
ok = 1;
}
}
/* for the time being, until we can handle non-layout-id
......@@ -201,7 +201,7 @@ static int i2sbus_add_dev(struct macio_dev *macio,
* When there are two i2s busses and only one has a layout-id,
* then this depends on the order, but that isn't important
* either as the second one in that case is just a modem. */
if (!force) {
if (!ok) {
kfree(dev);
return -ENODEV;
}
......
......@@ -194,7 +194,7 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
goto out;
ret = -ENOMEM;
rtd = kmalloc(sizeof(*rtd), GFP_KERNEL);
rtd = kzalloc(sizeof(*rtd), GFP_KERNEL);
if (!rtd)
goto out;
rtd->dma_desc_array =
......
......@@ -4996,7 +4996,7 @@ static struct hda_verb alc260_test_init_verbs[] = {
*/
static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid,
const char *pfx)
const char *pfx, int *vol_bits)
{
hda_nid_t nid_vol;
unsigned long vol_val, sw_val;
......@@ -5018,10 +5018,14 @@ static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid,
} else
return 0; /* N/A */
snprintf(name, sizeof(name), "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val);
if (err < 0)
return err;
if (!(*vol_bits & (1 << nid_vol))) {
/* first control for the volume widget */
snprintf(name, sizeof(name), "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val);
if (err < 0)
return err;
*vol_bits |= (1 << nid_vol);
}
snprintf(name, sizeof(name), "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val);
if (err < 0)
......@@ -5035,6 +5039,7 @@ static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec,
{
hda_nid_t nid;
int err;
int vols = 0;
spec->multiout.num_dacs = 1;
spec->multiout.dac_nids = spec->private_dac_nids;
......@@ -5042,21 +5047,22 @@ static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec,
nid = cfg->line_out_pins[0];
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Front");
err = alc260_add_playback_controls(spec, nid, "Front", &vols);
if (err < 0)
return err;
}
nid = cfg->speaker_pins[0];
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Speaker");
err = alc260_add_playback_controls(spec, nid, "Speaker", &vols);
if (err < 0)
return err;
}
nid = cfg->hp_pins[0];
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Headphone");
err = alc260_add_playback_controls(spec, nid, "Headphone",
&vols);
if (err < 0)
return err;
}
......
......@@ -1282,7 +1282,7 @@ static int stac92xx_build_controls(struct hda_codec *codec)
return err;
spec->multiout.share_spdif = 1;
}
if (spec->dig_in_nid && (!spec->gpio_dir & 0x01)) {
if (spec->dig_in_nid && !(spec->gpio_dir & 0x01)) {
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
if (err < 0)
return err;
......
......@@ -863,17 +863,21 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
return -EINVAL;
}
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
/*
* match both interface format and signal polarities since they
* are fixed
*/
switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
SND_SOC_DAIFMT_INV_MASK)) {
case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
break;
case SND_SOC_DAIFMT_DSP_A:
case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
iface_breg |= (0x01 << 6);
break;
case SND_SOC_DAIFMT_RIGHT_J:
case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF):
iface_breg |= (0x02 << 6);
break;
case SND_SOC_DAIFMT_LEFT_J:
case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
iface_breg |= (0x03 << 6);
break;
default:
......
......@@ -265,7 +265,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
break;
case SND_SOC_DAIFMT_DSP_A:
regs->srgr2 |= FPER(wlen * 2 - 1);
regs->srgr1 |= FWID(0);
regs->srgr1 |= FWID(wlen * 2 - 2);
break;
}
......@@ -284,7 +284,6 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
{
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
unsigned int temp_fmt = fmt;
if (mcbsp_data->configured)
return 0;
......@@ -307,8 +306,6 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
/* 0-bit data delay */
regs->rcr2 |= RDATDLY(0);
regs->xcr2 |= XDATDLY(0);
/* Invert bit clock and FS polarity configuration for DSP_A */
temp_fmt ^= SND_SOC_DAIFMT_IB_IF;
break;
default:
/* Unsupported data format */
......@@ -332,7 +329,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
}
/* Set bit clock (CLKX/CLKR) and FS polarities */
switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/*
* Normal BCLK + FS.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册