提交 bf3e7628 编写于 作者: L Linus Torvalds

Merge branch 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: stm32_fmc2: fix broken ECC
  mtd: spi-nor: Fix address width on flash chips > 16MB
  mtd: spi-nor: Don't copy self-pointing struct around
  mtd: rawnand: ifc: Move the ECC engine initialization to the right place
  mtd: rawnand: mxc: Move the ECC engine initialization to the right place
...@@ -707,6 +707,30 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip) ...@@ -707,6 +707,30 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
{ {
struct mtd_info *mtd = nand_to_mtd(chip); struct mtd_info *mtd = nand_to_mtd(chip);
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs;
u32 csor;
csor = ifc_in32(&ifc_global->csor_cs[priv->bank].csor);
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
chip->ecc.size = 512;
if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) {
chip->ecc.bytes = 8;
chip->ecc.strength = 4;
} else {
chip->ecc.bytes = 16;
chip->ecc.strength = 8;
}
} else {
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__, dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__,
nanddev_ntargets(&chip->base)); nanddev_ntargets(&chip->base));
...@@ -910,25 +934,6 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) ...@@ -910,25 +934,6 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
return -ENODEV; return -ENODEV;
} }
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
chip->ecc.size = 512;
if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) {
chip->ecc.bytes = 8;
chip->ecc.strength = 4;
} else {
chip->ecc.bytes = 16;
chip->ecc.strength = 8;
}
} else {
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
ret = fsl_ifc_sram_init(priv); ret = fsl_ifc_sram_init(priv);
if (ret) if (ret)
return ret; return ret;
......
...@@ -1681,6 +1681,11 @@ static int mxcnd_attach_chip(struct nand_chip *chip) ...@@ -1681,6 +1681,11 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
struct mxc_nand_host *host = nand_get_controller_data(chip); struct mxc_nand_host *host = nand_get_controller_data(chip);
struct device *dev = mtd->dev.parent; struct device *dev = mtd->dev.parent;
chip->ecc.bytes = host->devtype_data->eccbytes;
host->eccsize = host->devtype_data->eccsize;
chip->ecc.size = 512;
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
switch (chip->ecc.engine_type) { switch (chip->ecc.engine_type) {
case NAND_ECC_ENGINE_TYPE_ON_HOST: case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.read_page = mxc_nand_read_page; chip->ecc.read_page = mxc_nand_read_page;
...@@ -1836,19 +1841,7 @@ static int mxcnd_probe(struct platform_device *pdev) ...@@ -1836,19 +1841,7 @@ static int mxcnd_probe(struct platform_device *pdev)
if (host->devtype_data->axi_offset) if (host->devtype_data->axi_offset)
host->regs_axi = host->base + host->devtype_data->axi_offset; host->regs_axi = host->base + host->devtype_data->axi_offset;
this->ecc.bytes = host->devtype_data->eccbytes;
host->eccsize = host->devtype_data->eccsize;
this->legacy.select_chip = host->devtype_data->select_chip; this->legacy.select_chip = host->devtype_data->select_chip;
this->ecc.size = 512;
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
} else {
this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
/* NAND bus width determines access functions used by upper layer */ /* NAND bus width determines access functions used by upper layer */
if (host->pdata.width == 2) if (host->pdata.width == 2)
......
...@@ -1708,6 +1708,13 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip) ...@@ -1708,6 +1708,13 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
return -EINVAL; return -EINVAL;
} }
/* Default ECC settings in case they are not set in the device tree */
if (!chip->ecc.size)
chip->ecc.size = FMC2_ECC_STEP_SIZE;
if (!chip->ecc.strength)
chip->ecc.strength = FMC2_ECC_BCH8;
ret = nand_ecc_choose_conf(chip, &stm32_fmc2_nfc_ecc_caps, ret = nand_ecc_choose_conf(chip, &stm32_fmc2_nfc_ecc_caps,
mtd->oobsize - FMC2_BBM_LEN); mtd->oobsize - FMC2_BBM_LEN);
if (ret) { if (ret) {
...@@ -1727,8 +1734,7 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip) ...@@ -1727,8 +1734,7 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd, &stm32_fmc2_nfc_ooblayout_ops); mtd_set_ooblayout(mtd, &stm32_fmc2_nfc_ooblayout_ops);
if (chip->options & NAND_BUSWIDTH_16) stm32_fmc2_nfc_setup(chip);
stm32_fmc2_nfc_set_buswidth_16(nfc, true);
return 0; return 0;
} }
...@@ -1952,11 +1958,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev) ...@@ -1952,11 +1958,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE | chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE |
NAND_USES_DMA; NAND_USES_DMA;
/* Default ECC settings */
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = FMC2_ECC_STEP_SIZE;
chip->ecc.strength = FMC2_ECC_BCH8;
/* Scan to find existence of the device */ /* Scan to find existence of the device */
ret = nand_scan(chip, nand->ncs); ret = nand_scan(chip, nand->ncs);
if (ret) if (ret)
......
...@@ -2701,11 +2701,10 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor) ...@@ -2701,11 +2701,10 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
memcpy(&sfdp_params, nor->params, sizeof(sfdp_params)); memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
if (spi_nor_parse_sfdp(nor, &sfdp_params)) { if (spi_nor_parse_sfdp(nor, nor->params)) {
memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
nor->addr_width = 0; nor->addr_width = 0;
nor->flags &= ~SNOR_F_4B_OPCODES; nor->flags &= ~SNOR_F_4B_OPCODES;
} else {
memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
} }
} }
...@@ -3009,13 +3008,15 @@ static int spi_nor_set_addr_width(struct spi_nor *nor) ...@@ -3009,13 +3008,15 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
/* already configured from SFDP */ /* already configured from SFDP */
} else if (nor->info->addr_width) { } else if (nor->info->addr_width) {
nor->addr_width = nor->info->addr_width; nor->addr_width = nor->info->addr_width;
} else if (nor->mtd.size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
} else { } else {
nor->addr_width = 3; nor->addr_width = 3;
} }
if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
}
if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
dev_dbg(nor->dev, "address width is too large: %u\n", dev_dbg(nor->dev, "address width is too large: %u\n",
nor->addr_width); nor->addr_width);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册