atl1c: detect NIC type early

To support NICs that allow for more than one tx queue it is
required to detect NIC type early during probe. This is moves
NIC type detection before netdev_alloc to prepare for that.
Signed-off-by: NGatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/atheros/atl1c/atl1c_main.c

@@ -646,33 +646,26 @@ static int atl1c_alloc_queues(struct atl1c_adapter *adapter)
 	return 0;
 }
 
-static void atl1c_set_mac_type(struct atl1c_hw *hw)
+static enum atl1c_nic_type atl1c_get_mac_type(struct pci_dev *pdev,
+					      u8 __iomem *hw_addr)
 {
-	u32 magic;
-	switch (hw->device_id) {
+	switch (pdev->device) {
 	case PCI_DEVICE_ID_ATTANSIC_L2C:
-		hw->nic_type = athr_l2c;
-		break;
+		return athr_l2c;
 	case PCI_DEVICE_ID_ATTANSIC_L1C:
-		hw->nic_type = athr_l1c;
-		break;
+		return athr_l1c;
 	case PCI_DEVICE_ID_ATHEROS_L2C_B:
-		hw->nic_type = athr_l2c_b;
-		break;
+		return athr_l2c_b;
 	case PCI_DEVICE_ID_ATHEROS_L2C_B2:
-		hw->nic_type = athr_l2c_b2;
-		break;
+		return athr_l2c_b2;
 	case PCI_DEVICE_ID_ATHEROS_L1D:
-		hw->nic_type = athr_l1d;
-		break;
+		return athr_l1d;
 	case PCI_DEVICE_ID_ATHEROS_L1D_2_0:
-		hw->nic_type = athr_l1d_2;
-		AT_READ_REG(hw, REG_MT_MAGIC, &magic);
-		if (magic == MT_MAGIC)
-			hw->nic_type = athr_mt;
-		break;
+		if (readl(hw_addr + REG_MT_MAGIC) == MT_MAGIC)
+			return athr_mt;
+		return athr_l1d_2;
 	default:
-		break;
+		return athr_l1c;
 	}
 }
 
@@ -680,7 +673,6 @@ static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
 {
 	u32 link_ctrl_data;
 
-	atl1c_set_mac_type(hw);
 	AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);
 
 	hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE  |
@@ -2568,7 +2560,8 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct net_device *netdev;
 	struct atl1c_adapter *adapter;
 	static int cards_found;
-
+	u8 __iomem *hw_addr;
+	enum atl1c_nic_type nic_type;
 	int err = 0;
 
 	/* enable device (incl. PCI PM wakeup and hotplug setup) */
@@ -2602,6 +2595,15 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 
+	hw_addr = pci_ioremap_bar(pdev, 0);
+	if (!hw_addr) {
+		err = -EIO;
+		dev_err(&pdev->dev, "cannot map device registers\n");
+		goto err_ioremap;
+	}
+
+	nic_type = atl1c_get_mac_type(pdev, hw_addr);
+
 	netdev = alloc_etherdev(sizeof(struct atl1c_adapter));
 	if (netdev == NULL) {
 		err = -ENOMEM;
@@ -2618,13 +2620,9 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
 	adapter->hw.adapter = adapter;
+	adapter->hw.nic_type = nic_type;
 	adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg);
-	adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
-	if (!adapter->hw.hw_addr) {
-		err = -EIO;
-		dev_err(&pdev->dev, "cannot map device registers\n");
-		goto err_ioremap;
-	}
+	adapter->hw.hw_addr = hw_addr;
 
 	/* init mii data */
 	adapter->mii.dev = netdev;
@@ -2687,11 +2685,11 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 err_reset:
 err_register:
 err_sw_init:
-	iounmap(adapter->hw.hw_addr);
 err_init_netdev:
-err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
+	iounmap(hw_addr);
+err_ioremap:
 	pci_release_regions(pdev);
 err_pci_reg:
 err_dma: