提交 bf027ca1 编写于 作者: T Tony Lindgren

ARM: OMAP: Split sram.h to local headers and minimal shared header

Most of the defines are specific to omap1 and omap2+,
and should be in the local headers. Only minimal function
prototypes need to be shared.

As discussed on linux-arm-kernel, we want to avoid
relative includes for the arch/arm/*omap* shared code:

http://www.spinics.net/lists/linux-omap/msg80520.html

So this patch re-adds a minimal plat/sram.h.

The new plat/sram.h must not be included from drivers,
that will break build for omap2+ CONFIG_MULTIPLATFORM.

Note that this patch temporarily adds two more
relative includes; Those will be removed in the
following patch.
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 eba36d77
......@@ -24,12 +24,11 @@
#include <mach/hardware.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
......
......@@ -27,10 +27,9 @@
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "../plat-omap/sram.h"
#include "iomap.h"
#include "clock.h"
#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
......
......@@ -26,12 +26,11 @@
#include <mach/camera.h>
#include <mach/hardware.h>
#include "../plat-omap/sram.h"
#include "common.h"
#include "clock.h"
#include "dma.h"
#include "mmc.h"
#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
......
......@@ -44,6 +44,7 @@
#include <linux/io.h>
#include <linux/atomic.h>
#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
......@@ -56,11 +57,10 @@
#include <mach/irqs.h>
#include "../plat-omap/sram.h"
#include "iomap.h"
#include "clock.h"
#include "pm.h"
#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
......
#include <plat/sram.h>
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
......@@ -25,14 +25,13 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
......
......@@ -33,8 +33,6 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
......@@ -42,6 +40,7 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
......
......@@ -21,12 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
#include "sram.h"
#define CYCLES_PER_MHZ 1000000
......
......@@ -27,8 +27,6 @@
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "omap_hwmod.h"
#include "soc.h"
#include "iomap.h"
......@@ -43,6 +41,7 @@
#include "omap-pm.h"
#include "sdrc.h"
#include "serial.h"
#include "sram.h"
/*
* The machine specific code may provide the extra mapping besides the
......
......@@ -25,8 +25,6 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include "../plat-omap/sram.h"
#include "omap-wakeupgen.h"
#include "soc.h"
#include "common.h"
......
......@@ -31,6 +31,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/fncpy.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
......@@ -38,8 +40,6 @@
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "common.h"
#include "clock.h"
......@@ -48,6 +48,7 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"
......
......@@ -32,6 +32,7 @@
#include <trace/events/power.h>
#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
......@@ -40,8 +41,6 @@
#include <plat/prcm.h>
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "common.h"
#include "cm2xxx_3xxx.h"
......@@ -52,6 +51,7 @@
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "sram.h"
#include "control.h"
/* pm34xx errata defined in pm.h */
......
......@@ -23,8 +23,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "common.h"
#include "clock.h"
#include "sdrc.h"
......
......@@ -24,14 +24,13 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "clock.h"
#include "sdrc.h"
#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1
......
......@@ -26,13 +26,12 @@
#include <asm/assembler.h>
#include "../plat-omap/sram.h"
#include "omap34xx.h"
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
#include "sram.h"
#include "control.h"
/*
......
/*
* arch/arm/plat-omap/include/mach/sram.h
*
* Interface for functions that need to be run in internal SRAM
*
* This program is free software; you can redistribute it and/or modify
......@@ -8,26 +6,8 @@
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
#include <asm/fncpy.h>
int __init omap_sram_init(void);
extern void *omap_sram_push_address(unsigned long size);
/* Macro to push a function to the internal SRAM, using the fncpy API */
#define omap_sram_push(funcp, size) ({ \
typeof(&(funcp)) _res = NULL; \
void *_sram_address = omap_sram_push_address(size); \
if (_sram_address) \
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
#include <plat/sram.h>
extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
......@@ -44,9 +24,6 @@ extern u32 omap3_configure_core_dpll(
extern void omap3_sram_restore_context(void);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap24xx_sram_reprogram_clock_sz;
......@@ -104,4 +81,3 @@ static inline void omap_push_sram_idle(void) {}
#define OMAP4_SRAM_PA 0x40300000
#endif
#define AM33XX_SRAM_PA 0x40300000
#endif
int omap_sram_init(void);
extern void *omap_sram_push_address(unsigned long size);
/* Macro to push a function to the internal SRAM, using the fncpy API */
#define omap_sram_push(funcp, size) ({ \
typeof(&(funcp)) _res = NULL; \
void *_sram_address = omap_sram_push_address(size); \
if (_sram_address) \
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})
......@@ -20,15 +20,16 @@
#include <linux/init.h>
#include <linux/io.h>
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "../mach-omap1/soc.h"
#include "../mach-omap1/sram.h"
#include "../mach-omap2/soc.h"
#include "sram.h"
#include "../mach-omap2/sram.h"
/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
#include "../mach-omap2/iomap.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册