ARM: sunxi: Add the missing clocks to the pinctrl nodes

The pin controllers also use the two oscillators for debouncing. Add them
to the DTs.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChen-Yu Tsai <wens@csie.org>

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -967,7 +967,8 @@
 			compatible = "allwinner,sun4i-a10-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;

arch/arm/boot/dts/sun5i.dtsi

@@ -547,7 +547,8 @@
 		pio: pinctrl@01c20800 {
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -471,7 +471,8 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -1064,7 +1065,8 @@
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -1085,7 +1085,8 @@
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -266,7 +266,8 @@
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -575,7 +576,8 @@
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;

arch/arm/boot/dts/sun8i-h3.dtsi

@@ -321,7 +321,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;
@@ -614,7 +615,8 @@
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_reset 0>;
 			gpio-controller;
 			#gpio-cells = <3>;

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -678,7 +678,8 @@
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -902,7 +903,8 @@
 			reg = <0x08002c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apbs_gates 0>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;