clk: mvebu: ap806: Prepare the introduction of AP807 clock support

Factor out the code that is only useful to AP806 so it will be easier
to support AP807. No functional changes.
Signed-off-by: NBen Peled <bpeled@marvell.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-8-miquel.raynal@bootlin.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>

drivers/clk/mvebu/ap806-system-controller.c

@@ -30,100 +30,114 @@ static struct clk_onecell_data ap806_clk_data = {
 	.clk_num = AP806_CLK_NUM,
 };
 
-static int ap806_syscon_common_probe(struct platform_device *pdev,
-				     struct device_node *syscon_node)
+static int ap806_get_sar_clocks(unsigned int freq_mode,
+				unsigned int *cpuclk_freq,
+				unsigned int *dclk_freq)
 {
-	unsigned int freq_mode, cpuclk_freq, dclk_freq;
-	const char *name, *fixedclk_name;
-	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	struct regmap *regmap;
-	u32 reg;
-	int ret;
-
-	regmap = syscon_node_to_regmap(syscon_node);
-	if (IS_ERR(regmap)) {
-		dev_err(dev, "cannot get regmap\n");
-		return PTR_ERR(regmap);
-	}
-
-	ret = regmap_read(regmap, AP806_SAR_REG, &reg);
-	if (ret) {
-		dev_err(dev, "cannot read from regmap\n");
-		return ret;
-	}
-
-	freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK;
 	switch (freq_mode) {
 	case 0x0:
+		*cpuclk_freq = 2000;
+		*dclk_freq = 600;
+		break;
 	case 0x1:
-		cpuclk_freq = 2000;
+		*cpuclk_freq = 2000;
+		*dclk_freq = 525;
 		break;
 	case 0x6:
+		*cpuclk_freq = 1800;
+		*dclk_freq = 600;
+		break;
 	case 0x7:
-		cpuclk_freq = 1800;
+		*cpuclk_freq = 1800;
+		*dclk_freq = 525;
 		break;
 	case 0x4:
+		*cpuclk_freq = 1600;
+		*dclk_freq = 400;
+		break;
 	case 0xB:
+		*cpuclk_freq = 1600;
+		*dclk_freq = 450;
+		break;
 	case 0xD:
-		cpuclk_freq = 1600;
+		*cpuclk_freq = 1600;
+		*dclk_freq = 525;
 		break;
 	case 0x1a:
-		cpuclk_freq = 1400;
+		*cpuclk_freq = 1400;
+		*dclk_freq = 400;
 		break;
 	case 0x14:
+		*cpuclk_freq = 1300;
+		*dclk_freq = 400;
+		break;
 	case 0x17:
-		cpuclk_freq = 1300;
+		*cpuclk_freq = 1300;
+		*dclk_freq = 325;
 		break;
 	case 0x19:
-		cpuclk_freq = 1200;
+		*cpuclk_freq = 1200;
+		*dclk_freq = 400;
 		break;
 	case 0x13:
+		*cpuclk_freq = 1000;
+		*dclk_freq = 325;
+		break;
 	case 0x1d:
-		cpuclk_freq = 1000;
+		*cpuclk_freq = 1000;
+		*dclk_freq = 400;
 		break;
 	case 0x1c:
-		cpuclk_freq = 800;
+		*cpuclk_freq = 800;
+		*dclk_freq = 400;
 		break;
 	case 0x1b:
-		cpuclk_freq = 600;
+		*cpuclk_freq = 600;
+		*dclk_freq = 400;
 		break;
 	default:
-		dev_err(dev, "invalid Sample at Reset value\n");
 		return -EINVAL;
 	}
 
-	/* Get DCLK frequency (DCLK = DDR_CLK / 2) */
-	switch (freq_mode) {
-	case 0x0:
-	case 0x6:
-		/* DDR_CLK = 1200Mhz */
-		dclk_freq = 600;
-		break;
-	case 0x1:
-	case 0x7:
-	case 0xD:
-		/* DDR_CLK = 1050Mhz */
-		dclk_freq = 525;
-		break;
-	case 0x13:
-	case 0x17:
-		/* DDR_CLK = 650Mhz */
-		dclk_freq = 325;
-		break;
-	case 0x4:
-	case 0x14:
-	case 0x19:
-	case 0x1A:
-	case 0x1B:
-	case 0x1C:
-	case 0x1D:
-		/* DDR_CLK = 800Mhz */
-		dclk_freq = 400;
-		break;
-	default:
-		dclk_freq = 0;
+	return 0;
+}
+
+static int ap806_syscon_common_probe(struct platform_device *pdev,
+				     struct device_node *syscon_node)
+{
+	unsigned int freq_mode, cpuclk_freq, dclk_freq;
+	const char *name, *fixedclk_name;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct regmap *regmap;
+	u32 reg;
+	int ret;
+
+	regmap = syscon_node_to_regmap(syscon_node);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "cannot get regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = regmap_read(regmap, AP806_SAR_REG, &reg);
+	if (ret) {
+		dev_err(dev, "cannot read from regmap\n");
+		return ret;
+	}
+
+	freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK;
+
+	if (of_device_is_compatible(pdev->dev.of_node,
+				    "marvell,ap806-clock")) {
+		ret = ap806_get_sar_clocks(freq_mode, &cpuclk_freq, &dclk_freq);
+	} else {
+		dev_err(dev, "compatible not supported\n");
+		return -EINVAL;
+	}
+
+	if (ret) {
 		dev_err(dev, "invalid Sample at Reset value\n");
+		return ret;
 	}
 
 	/* Convert to hertz */