提交 bd8481e1 编写于 作者: D Doug Thompson 提交者: Greg Kroah-Hartman

[PATCH] PCI Bus Parity Status-broken hardware attribute, EDAC foundation

Currently, the EDAC (error detection and correction) modules that are in
the kernel contain some features that need to be moved. After some good
feedback on the PCI Parity detection code and interface
(http://www.ussg.iu.edu/hypermail/linux/kernel/0603.1/0897.html) this
patch ADDs an new attribute to the pci_dev structure: Namely the
'broken_parity_status' bit.

When set this indicates that the respective hardware generates false
positives of Parity errors.

The EDAC "blacklist" solution was inferior and will be removed in a
future patch.

Also in this patch is a PCI quirk.c entry for an Infiniband PCI-X card
which generates false positive parity errors.

I am requesting comments on this AND on the possibility of a exposing
this 'broken_parity_status' bit to userland via the PCI device sysfs
directory for devices. This access would allow for enabling of this
feature on new devices and for old devices that have their drivers
updated. (SLES 9 SP3 did this on an ATI motherboard video device). There
is a need to update such a PCI attribute between kernel releases.

This patch just adds a storage place for the attribute and a quirk entry
for a known bad PCI device. PCI Parity reaper/harvestor operations are
in EDAC itself and will be refactored to use this PCI attribute instead
of its own mechanisms (which are currently disabled) in the future.
Signed-off-by: NDoug Thompson <norsk5@xmission.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 53e4d30d
......@@ -24,6 +24,17 @@
#include <linux/acpi.h>
#include "pci.h"
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
*/
static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
{
dev->broken_parity_status = 1; /* This device gives false positives */
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
static void __devinit quirk_passive_release(struct pci_dev *dev)
......
......@@ -162,6 +162,7 @@ struct pci_dev {
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
u32 saved_config_space[16]; /* config space saved at suspend time */
struct hlist_head saved_cap_space;
......
......@@ -1946,6 +1946,7 @@
#define PCI_VENDOR_ID_MELLANOX 0x15b3
#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44
#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE 0x5a46
#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282
#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册