octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic

Out of all the TCAM entries, reserve last TX and RX TCAM flow
entry(low priority) so that normal traffic can be sent out and
received. The traffic which needs macsec processing hits the
high priority TCAM flows. Also install a FLR handler to free
the allocated resources for PF/VF.
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/af/mcs.c

@@ -181,6 +181,51 @@ void mcs_flowid_entry_write(struct mcs *mcs, u64 *data, u64 *mask, int flow_id,
 	}
 }
 
+int mcs_install_flowid_bypass_entry(struct mcs *mcs)
+{
+	int flow_id, secy_id, reg_id;
+	struct secy_mem_map map;
+	u64 reg, plcy = 0;
+
+	/* Flow entry */
+	flow_id = mcs->hw->tcam_entries - MCS_RSRC_RSVD_CNT;
+	for (reg_id = 0; reg_id < 4; reg_id++) {
+		reg = MCSX_CPM_RX_SLAVE_FLOWID_TCAM_MASKX(reg_id, flow_id);
+		mcs_reg_write(mcs, reg, GENMASK_ULL(63, 0));
+	}
+	for (reg_id = 0; reg_id < 4; reg_id++) {
+		reg = MCSX_CPM_TX_SLAVE_FLOWID_TCAM_MASKX(reg_id, flow_id);
+		mcs_reg_write(mcs, reg, GENMASK_ULL(63, 0));
+	}
+	/* secy */
+	secy_id = mcs->hw->secy_entries - MCS_RSRC_RSVD_CNT;
+
+	/* Set validate frames to NULL and enable control port */
+	plcy = 0x7ull;
+	if (mcs->hw->mcs_blks > 1)
+		plcy = BIT_ULL(0) | 0x3ull << 4;
+	mcs_secy_plcy_write(mcs, plcy, secy_id, MCS_RX);
+
+	/* Enable control port and set mtu to max */
+	plcy = BIT_ULL(0) | GENMASK_ULL(43, 28);
+	if (mcs->hw->mcs_blks > 1)
+		plcy = BIT_ULL(0) | GENMASK_ULL(63, 48);
+	mcs_secy_plcy_write(mcs, plcy, secy_id, MCS_TX);
+
+	/* Map flowid to secy */
+	map.secy = secy_id;
+	map.ctrl_pkt = 0;
+	map.flow_id = flow_id;
+	mcs->mcs_ops->mcs_flowid_secy_map(mcs, &map, MCS_RX);
+	map.sc = secy_id;
+	mcs->mcs_ops->mcs_flowid_secy_map(mcs, &map, MCS_TX);
+
+	/* Enable Flowid entry */
+	mcs_ena_dis_flowid_entry(mcs, flow_id, MCS_RX, true);
+	mcs_ena_dis_flowid_entry(mcs, flow_id, MCS_TX, true);
+	return 0;
+}
+
 void mcs_clear_secy_plcy(struct mcs *mcs, int secy_id, int dir)
 {
 	struct mcs_rsrc_map *map;

drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c

@@ -133,6 +133,27 @@ int rvu_mbox_handler_mcs_custom_tag_cfg_get(struct rvu *rvu, struct mcs_custom_t
 	return 0;
 }
 
+int rvu_mcs_flr_handler(struct rvu *rvu, u16 pcifunc)
+{
+	struct mcs *mcs;
+	int mcs_id;
+
+	/* CNF10K-B mcs0-6 are mapped to RPM2-8*/
+	if (rvu->mcs_blk_cnt > 1) {
+		for (mcs_id = 0; mcs_id < rvu->mcs_blk_cnt; mcs_id++) {
+			mcs = mcs_get_pdata(mcs_id);
+			mcs_free_all_rsrc(mcs, MCS_RX, pcifunc);
+			mcs_free_all_rsrc(mcs, MCS_TX, pcifunc);
+		}
+	} else {
+		/* CN10K-B has only one mcs block */
+		mcs = mcs_get_pdata(0);
+		mcs_free_all_rsrc(mcs, MCS_RX, pcifunc);
+		mcs_free_all_rsrc(mcs, MCS_TX, pcifunc);
+	}
+	return 0;
+}
+
 int rvu_mbox_handler_mcs_flowid_ena_entry(struct rvu *rvu,
 					  struct mcs_flowid_ena_dis_entry *req,
 					  struct msg_rsp *rsp)
@@ -543,8 +564,10 @@ int rvu_mcs_init(struct rvu *rvu)
 		rvu_mcs_set_lmac_bmap(rvu);
 	}
 
+	/* Install default tcam bypass entry and set port to operational mode */
 	for (mcs_id = 0; mcs_id < rvu->mcs_blk_cnt; mcs_id++) {
 		mcs = mcs_get_pdata(mcs_id);
+		mcs_install_flowid_bypass_entry(mcs);
 		for (lmac = 0; lmac < mcs->hw->lmac_cnt; lmac++)
 			mcs_set_lmac_mode(mcs, lmac, 0);
 	}

drivers/net/ethernet/marvell/octeontx2/af/rvu.h

@@ -875,5 +875,6 @@ int rvu_npc_set_parse_mode(struct rvu *rvu, u16 pcifunc, u64 mode, u8 dir,
 
 /* CN10K MCS */
 int rvu_mcs_init(struct rvu *rvu);
+int rvu_mcs_flr_handler(struct rvu *rvu, u16 pcifunc);
 
 #endif /* RVU_H */