i40e: Fix PHY type identifiers for 2.5G and 5G adapters

stable inclusion
from stable-5.10.38
commit b8cf51a36da2c3e21f72c5de171fc778f187b807
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 15395ec4 ]

Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. This commit introduces
separate PHY identifiers for these two operation types.

Fixes: 2e45d3f4 ("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: NDawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: NDave Switzer <david.switzer@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -1565,8 +1565,10 @@ enum i40e_aq_phy_type {
 	I40E_PHY_TYPE_25GBASE_LR		= 0x22,
 	I40E_PHY_TYPE_25GBASE_AOC		= 0x23,
 	I40E_PHY_TYPE_25GBASE_ACC		= 0x24,
-	I40E_PHY_TYPE_2_5GBASE_T		= 0x30,
-	I40E_PHY_TYPE_5GBASE_T			= 0x31,
+	I40E_PHY_TYPE_2_5GBASE_T		= 0x26,
+	I40E_PHY_TYPE_5GBASE_T			= 0x27,
+	I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS	= 0x30,
+	I40E_PHY_TYPE_5GBASE_T_LINK_STATUS	= 0x31,
 	I40E_PHY_TYPE_MAX,
 	I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP	= 0xFD,
 	I40E_PHY_TYPE_EMPTY			= 0xFE,

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -1154,8 +1154,8 @@ static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw)
 		break;
 	case I40E_PHY_TYPE_100BASE_TX:
 	case I40E_PHY_TYPE_1000BASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_10GBASE_T:
 		media = I40E_MEDIA_TYPE_BASET;
 		break;

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -841,8 +841,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 							     10000baseT_Full);
 		break;
 	case I40E_PHY_TYPE_10GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_1000BASE_T:
 	case I40E_PHY_TYPE_100BASE_TX:
 		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);

drivers/net/ethernet/intel/i40e/i40e_type.h

@@ -239,11 +239,8 @@ struct i40e_phy_info {
 #define I40E_CAP_PHY_TYPE_25GBASE_ACC BIT_ULL(I40E_PHY_TYPE_25GBASE_ACC + \
 					     I40E_PHY_TYPE_OFFSET)
 /* Offset for 2.5G/5G PHY Types value to bit number conversion */
-#define I40E_PHY_TYPE_OFFSET2 (-10)
-#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T + \
-					     I40E_PHY_TYPE_OFFSET2)
-#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T + \
-					     I40E_PHY_TYPE_OFFSET2)
+#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T)
+#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T)
 #define I40E_HW_CAP_MAX_GPIO			30
 /* Capabilities of a PF or a VF or the whole device */
 struct i40e_hw_capabilities {