提交 bcb37f6c 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Reclaim TG3_FLG3_5761_5784_AX_FIXES flag

This patch reclaims the TG3_FLG3_5761_5784_AX_FIXES flag.  It only
used twice in non-fast paths.  This patch also consolidates some other
places where specific 5784 AX chip revisions can be generalized.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 3f007891
......@@ -1742,7 +1742,8 @@ static int tg3_phy_reset(struct tg3 *tp)
tw32(TG3_CPMU_CTRL, cpmuctrl);
}
if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
u32 val;
val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
......@@ -2004,7 +2005,8 @@ static void tg3_power_down_phy(struct tg3 *tp)
(tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
return;
if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
val &= ~CPMU_LSPD_1000MB_MACCLK_MASK;
val |= CPMU_LSPD_1000MB_MACCLK_12_5;
......@@ -3815,8 +3817,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
err = tg3_setup_copper_phy(tp, force_reset);
}
if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5784_A1) {
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
u32 val, scale;
val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
......@@ -7044,8 +7045,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tg3_write_sig_legacy(tp, RESET_KIND_INIT);
if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5784_A1) {
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
val = tr32(TG3_CPMU_CTRL);
val &= ~(CPMU_CTRL_LINK_AWARE_MODE | CPMU_CTRL_LINK_IDLE_MODE);
tw32(TG3_CPMU_CTRL, val);
......@@ -12283,16 +12283,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5784_A1 ||
tp->pci_chip_rev_id == CHIPREV_ID_5761_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5761_A1)
tp->tg3_flags3 |= TG3_FLG3_5761_5784_AX_FIXES;
}
/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
* GPIO1 driven high will bring 5700's external PHY out of reset.
* It is also used as eeprom write protect on LOMs.
......
......@@ -2510,7 +2510,6 @@ struct tg3 {
u32 tg3_flags3;
#define TG3_FLG3_NO_NVRAM_ADDR_TRANS 0x00000001
#define TG3_FLG3_ENABLE_APE 0x00000002
#define TG3_FLG3_5761_5784_AX_FIXES 0x00000004
#define TG3_FLG3_5701_DMA_BUG 0x00000008
#define TG3_FLG3_USE_PHYLIB 0x00000010
#define TG3_FLG3_MDIOBUS_INITED 0x00000020
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册