提交 bc118fe4 编写于 作者: A Andy Grover 提交者: Nicholas Bellinger

target: Further refactoring of core_scsi3_emulate_pro_register()

Use bool params when appropriate.

Eliminate unneeded pr_reg_e and type variables.

Just one goto label, so rename to 'out' from 'out_put_pr_reg'.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
上级 51d9c41d
......@@ -1995,18 +1995,18 @@ static int core_scsi3_update_and_write_aptpl(struct se_device *dev, bool aptpl)
static sense_reason_t
core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
int aptpl, int all_tg_pt, int spec_i_pt, enum register_type register_type)
bool aptpl, bool all_tg_pt, bool spec_i_pt, enum register_type register_type)
{
struct se_session *se_sess = cmd->se_sess;
struct se_device *dev = cmd->se_dev;
struct se_dev_entry *se_deve;
struct se_lun *se_lun = cmd->se_lun;
struct se_portal_group *se_tpg;
struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp, *pr_reg_e;
struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp;
struct t10_reservation *pr_tmpl = &dev->t10_pr;
unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
sense_reason_t ret = TCM_NO_SENSE;
int pr_holder = 0, type;
int pr_holder = 0;
if (!se_sess || !se_lun) {
pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");
......@@ -2024,8 +2024,8 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
/*
* Follow logic from spc4r17 Section 5.7.7, Register Behaviors Table 47
*/
pr_reg_e = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess);
if (!pr_reg_e) {
pr_reg = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess);
if (!pr_reg) {
if (res_key) {
pr_warn("SPC-3 PR: Reservation Key non-zero"
" for SA REGISTER, returning CONFLICT\n");
......@@ -2069,29 +2069,23 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
return core_scsi3_update_and_write_aptpl(dev, aptpl);
}
/*
* Locate the existing *pr_reg via struct se_node_acl pointers
*/
pr_reg = pr_reg_e;
type = pr_reg->pr_res_type;
/* ok, existing registration */
if (register_type == REGISTER) {
if (res_key != pr_reg->pr_res_key) {
pr_err("SPC-3 PR REGISTER: Received"
" res_key: 0x%016Lx does not match"
" existing SA REGISTER res_key:"
" 0x%016Lx\n", res_key,
pr_reg->pr_res_key);
ret = TCM_RESERVATION_CONFLICT;
goto out_put_pr_reg;
}
if ((register_type == REGISTER) && (res_key != pr_reg->pr_res_key)) {
pr_err("SPC-3 PR REGISTER: Received"
" res_key: 0x%016Lx does not match"
" existing SA REGISTER res_key:"
" 0x%016Lx\n", res_key,
pr_reg->pr_res_key);
ret = TCM_RESERVATION_CONFLICT;
goto out;
}
if (spec_i_pt) {
pr_err("SPC-3 PR REGISTER: SPEC_I_PT"
" set on a registered nexus\n");
ret = TCM_INVALID_PARAMETER_LIST;
goto out_put_pr_reg;
goto out;
}
/*
......@@ -2103,7 +2097,7 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
" registration exists, but ALL_TG_PT=1 bit not"
" present in received PROUT\n");
ret = TCM_INVALID_CDB_FIELD;
goto out_put_pr_reg;
goto out;
}
/*
......@@ -2132,7 +2126,7 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
cmd->se_dev, pr_reg);
if (pr_holder < 0) {
ret = TCM_RESERVATION_CONFLICT;
goto out_put_pr_reg;
goto out;
}
spin_lock(&pr_tmpl->registration_lock);
......@@ -2177,8 +2171,8 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
* RESERVATIONS RELEASED.
*/
if (pr_holder &&
(type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY ||
type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY)) {
(pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY ||
pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY)) {
list_for_each_entry(pr_reg_p,
&pr_tmpl->registration_list,
pr_reg_list) {
......@@ -2196,7 +2190,7 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key,
ret = core_scsi3_update_and_write_aptpl(dev, aptpl);
out_put_pr_reg:
out:
core_scsi3_put_pr_reg(pr_reg);
return ret;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册