提交 bc08f96b 编写于 作者: O Oder Chiou 提交者: Mark Brown

ASoC: rt286: Add RL6347A class device shared support for RT286

The patch separates the IO function from the rt286. It is prepared to share
for new chips that support the same IO function.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 b787f68c
......@@ -507,6 +507,11 @@ config SND_SOC_RL6231
default m if SND_SOC_RT5670=m
default m if SND_SOC_RT5677=m
config SND_SOC_RL6347A
tristate
default y if SND_SOC_RT286=y
default m if SND_SOC_RT286=m
config SND_SOC_RT286
tristate
depends on I2C
......
......@@ -77,6 +77,7 @@ snd-soc-pcm512x-objs := pcm512x.o
snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
snd-soc-pcm512x-spi-objs := pcm512x-spi.o
snd-soc-rl6231-objs := rl6231.o
snd-soc-rl6347a-objs := rl6347a.o
snd-soc-rt286-objs := rt286.o
snd-soc-rt5631-objs := rt5631.o
snd-soc-rt5640-objs := rt5640.o
......@@ -262,6 +263,7 @@ obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o
obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o
obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o
obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o
obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o
obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o
obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o
......
/*
* rl6347a.c - RL6347A class device shared support
*
* Copyright 2015 Realtek Semiconductor Corp.
*
* Author: Oder Chiou <oder_chiou@realtek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/jack.h>
#include <linux/workqueue.h>
#include <sound/hda_verbs.h>
#include "rl6347a.h"
int rl6347a_hw_write(void *context, unsigned int reg, unsigned int value)
{
struct i2c_client *client = context;
struct rl6347a_priv *rl6347a = i2c_get_clientdata(client);
u8 data[4];
int ret, i;
/* handle index registers */
if (reg <= 0xff) {
rl6347a_hw_write(client, RL6347A_COEF_INDEX, reg);
for (i = 0; i < rl6347a->index_cache_size; i++) {
if (reg == rl6347a->index_cache[i].reg) {
rl6347a->index_cache[i].def = value;
break;
}
}
reg = RL6347A_PROC_COEF;
}
data[0] = (reg >> 24) & 0xff;
data[1] = (reg >> 16) & 0xff;
/*
* 4 bit VID: reg should be 0
* 12 bit VID: value should be 0
* So we use an OR operator to handle it rather than use if condition.
*/
data[2] = ((reg >> 8) & 0xff) | ((value >> 8) & 0xff);
data[3] = value & 0xff;
ret = i2c_master_send(client, data, 4);
if (ret == 4)
return 0;
else
pr_err("ret=%d\n", ret);
if (ret < 0)
return ret;
else
return -EIO;
}
EXPORT_SYMBOL_GPL(rl6347a_hw_write);
int rl6347a_hw_read(void *context, unsigned int reg, unsigned int *value)
{
struct i2c_client *client = context;
struct i2c_msg xfer[2];
int ret;
__be32 be_reg;
unsigned int index, vid, buf = 0x0;
/* handle index registers */
if (reg <= 0xff) {
rl6347a_hw_write(client, RL6347A_COEF_INDEX, reg);
reg = RL6347A_PROC_COEF;
}
reg = reg | 0x80000;
vid = (reg >> 8) & 0xfff;
if (AC_VERB_GET_AMP_GAIN_MUTE == (vid & 0xf00)) {
index = (reg >> 8) & 0xf;
reg = (reg & ~0xf0f) | index;
}
be_reg = cpu_to_be32(reg);
/* Write register */
xfer[0].addr = client->addr;
xfer[0].flags = 0;
xfer[0].len = 4;
xfer[0].buf = (u8 *)&be_reg;
/* Read data */
xfer[1].addr = client->addr;
xfer[1].flags = I2C_M_RD;
xfer[1].len = 4;
xfer[1].buf = (u8 *)&buf;
ret = i2c_transfer(client->adapter, xfer, 2);
if (ret < 0)
return ret;
else if (ret != 2)
return -EIO;
*value = be32_to_cpu(buf);
return 0;
}
EXPORT_SYMBOL_GPL(rl6347a_hw_read);
MODULE_DESCRIPTION("RL6347A class device shared support");
MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
MODULE_LICENSE("GPL v2");
/*
* rl6347a.h - RL6347A class device shared support
*
* Copyright 2015 Realtek Semiconductor Corp.
*
* Author: Oder Chiou <oder_chiou@realtek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __RL6347A_H__
#define __RL6347A_H__
#define VERB_CMD(V, N, D) ((N << 20) | (V << 8) | D)
#define RL6347A_VENDOR_REGISTERS 0x20
#define RL6347A_COEF_INDEX\
VERB_CMD(AC_VERB_SET_COEF_INDEX, RL6347A_VENDOR_REGISTERS, 0)
#define RL6347A_PROC_COEF\
VERB_CMD(AC_VERB_SET_PROC_COEF, RL6347A_VENDOR_REGISTERS, 0)
struct rl6347a_priv {
struct reg_default *index_cache;
int index_cache_size;
};
int rl6347a_hw_write(void *context, unsigned int reg, unsigned int value);
int rl6347a_hw_read(void *context, unsigned int reg, unsigned int *value);
#endif /* __RL6347A_H__ */
......@@ -31,12 +31,15 @@
#include <sound/rt286.h>
#include <sound/hda_verbs.h>
#include "rl6347a.h"
#include "rt286.h"
#define RT286_VENDOR_ID 0x10ec0286
#define RT288_VENDOR_ID 0x10ec0288
struct rt286_priv {
struct reg_default *index_cache;
int index_cache_size;
struct regmap *regmap;
struct snd_soc_codec *codec;
struct rt286_platform_data pdata;
......@@ -45,7 +48,6 @@ struct rt286_priv {
struct delayed_work jack_detect_work;
int sys_clk;
int clk_id;
struct reg_default *index_cache;
};
static struct reg_default rt286_index_def[] = {
......@@ -185,94 +187,6 @@ static bool rt286_readable_register(struct device *dev, unsigned int reg)
}
}
static int rt286_hw_write(void *context, unsigned int reg, unsigned int value)
{
struct i2c_client *client = context;
struct rt286_priv *rt286 = i2c_get_clientdata(client);
u8 data[4];
int ret, i;
/* handle index registers */
if (reg <= 0xff) {
rt286_hw_write(client, RT286_COEF_INDEX, reg);
for (i = 0; i < INDEX_CACHE_SIZE; i++) {
if (reg == rt286->index_cache[i].reg) {
rt286->index_cache[i].def = value;
break;
}
}
reg = RT286_PROC_COEF;
}
data[0] = (reg >> 24) & 0xff;
data[1] = (reg >> 16) & 0xff;
/*
* 4 bit VID: reg should be 0
* 12 bit VID: value should be 0
* So we use an OR operator to handle it rather than use if condition.
*/
data[2] = ((reg >> 8) & 0xff) | ((value >> 8) & 0xff);
data[3] = value & 0xff;
ret = i2c_master_send(client, data, 4);
if (ret == 4)
return 0;
else
pr_err("ret=%d\n", ret);
if (ret < 0)
return ret;
else
return -EIO;
}
static int rt286_hw_read(void *context, unsigned int reg, unsigned int *value)
{
struct i2c_client *client = context;
struct i2c_msg xfer[2];
int ret;
__be32 be_reg;
unsigned int index, vid, buf = 0x0;
/* handle index registers */
if (reg <= 0xff) {
rt286_hw_write(client, RT286_COEF_INDEX, reg);
reg = RT286_PROC_COEF;
}
reg = reg | 0x80000;
vid = (reg >> 8) & 0xfff;
if (AC_VERB_GET_AMP_GAIN_MUTE == (vid & 0xf00)) {
index = (reg >> 8) & 0xf;
reg = (reg & ~0xf0f) | index;
}
be_reg = cpu_to_be32(reg);
/* Write register */
xfer[0].addr = client->addr;
xfer[0].flags = 0;
xfer[0].len = 4;
xfer[0].buf = (u8 *)&be_reg;
/* Read data */
xfer[1].addr = client->addr;
xfer[1].flags = I2C_M_RD;
xfer[1].len = 4;
xfer[1].buf = (u8 *)&buf;
ret = i2c_transfer(client->adapter, xfer, 2);
if (ret < 0)
return ret;
else if (ret != 2)
return -EIO;
*value = be32_to_cpu(buf);
return 0;
}
#ifdef CONFIG_PM
static void rt286_index_sync(struct snd_soc_codec *codec)
{
......@@ -1173,8 +1087,8 @@ static const struct regmap_config rt286_regmap = {
.max_register = 0x02370100,
.volatile_reg = rt286_volatile_register,
.readable_reg = rt286_readable_register,
.reg_write = rt286_hw_write,
.reg_read = rt286_hw_read,
.reg_write = rl6347a_hw_write,
.reg_read = rl6347a_hw_read,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = rt286_reg,
.num_reg_defaults = ARRAY_SIZE(rt286_reg),
......@@ -1247,6 +1161,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
}
rt286->index_cache = rt286_index_def;
rt286->index_cache_size = INDEX_CACHE_SIZE;
rt286->i2c = i2c;
i2c_set_clientdata(i2c, rt286);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册