提交 bb98ecd4 编写于 作者: S Sara Sharon 提交者: Luca Coelho

iwlwifi: pcie: merge iwl_queue and iwl_txq

The original intent was to have the general iwl_queue shared
between RX and TX queues, but it is not the actual status.
Since it is not shared with any struct but iwl_txq, it adds
unnecessary complexity. Merge those structs.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
上级 4fe10bc6
......@@ -195,39 +195,6 @@ struct iwl_cmd_meta {
u32 tbs;
};
/*
* Generic queue structure
*
* Contains common data for Rx and Tx queues.
*
* Note the difference between TFD_QUEUE_SIZE_MAX and n_window: the hardware
* always assumes 256 descriptors, so TFD_QUEUE_SIZE_MAX is always 256 (unless
* there might be HW changes in the future). For the normal TX
* queues, n_window, which is the size of the software queue data
* is also 256; however, for the command queue, n_window is only
* 32 since we don't need so many commands pending. Since the HW
* still uses 256 BDs for DMA though, TFD_QUEUE_SIZE_MAX stays 256. As a result,
* the software buffers (in the variables @meta, @txb in struct
* iwl_txq) only have 32 entries, while the HW buffers (@tfds in
* the same struct) have 256.
* This means that we end up with the following:
* HW entries: | 0 | ... | N * 32 | ... | N * 32 + 31 | ... | 255 |
* SW entries: | 0 | ... | 31 |
* where N is a number between 0 and 7. This means that the SW
* data is a window overlayed over the HW queue.
*/
struct iwl_queue {
int write_ptr; /* 1-st empty entry (index) host_w*/
int read_ptr; /* last used entry (index) host_r*/
/* use for monitoring and recovering the stuck queue */
dma_addr_t dma_addr; /* physical addr for BD's */
int n_window; /* safe queue window */
u32 id;
int low_mark; /* low watermark, resume queue if free
* space more than this */
int high_mark; /* high watermark, stop queue if free
* space less than this */
};
#define TFD_TX_CMD_SLOTS 256
#define TFD_CMD_SLOTS 32
......@@ -274,12 +241,31 @@ struct iwl_pcie_first_tb_buf {
* @wd_timeout: queue watchdog timeout (jiffies) - per queue
* @frozen: tx stuck queue timer is frozen
* @frozen_expiry_remainder: remember how long until the timer fires
* @write_ptr: 1-st empty entry (index) host_w
* @read_ptr: last used entry (index) host_r
* @dma_addr: physical addr for BD's
* @n_window: safe queue window
* @id: queue id
* @low_mark: low watermark, resume queue if free space more than this
* @high_mark: high watermark, stop queue if free space less than this
*
* A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
* descriptors) and required locking structures.
*
* Note the difference between TFD_QUEUE_SIZE_MAX and n_window: the hardware
* always assumes 256 descriptors, so TFD_QUEUE_SIZE_MAX is always 256 (unless
* there might be HW changes in the future). For the normal TX
* queues, n_window, which is the size of the software queue data
* is also 256; however, for the command queue, n_window is only
* 32 since we don't need so many commands pending. Since the HW
* still uses 256 BDs for DMA though, TFD_QUEUE_SIZE_MAX stays 256.
* This means that we end up with the following:
* HW entries: | 0 | ... | N * 32 | ... | N * 32 + 31 | ... | 255 |
* SW entries: | 0 | ... | 31 |
* where N is a number between 0 and 7. This means that the SW
* data is a window overlayed over the HW queue.
*/
struct iwl_txq {
struct iwl_queue q;
void *tfds;
struct iwl_pcie_first_tb_buf *first_tb_bufs;
dma_addr_t first_tb_dma;
......@@ -295,6 +281,14 @@ struct iwl_txq {
bool block;
unsigned long wd_timeout;
struct sk_buff_head overflow_q;
int write_ptr;
int read_ptr;
dma_addr_t dma_addr;
int n_window;
u32 id;
int low_mark;
int high_mark;
};
static inline dma_addr_t
......@@ -633,9 +627,9 @@ static inline void iwl_wake_queue(struct iwl_trans *trans,
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
if (test_and_clear_bit(txq->q.id, trans_pcie->queue_stopped)) {
IWL_DEBUG_TX_QUEUES(trans, "Wake hwq %d\n", txq->q.id);
iwl_op_mode_queue_not_full(trans->op_mode, txq->q.id);
if (test_and_clear_bit(txq->id, trans_pcie->queue_stopped)) {
IWL_DEBUG_TX_QUEUES(trans, "Wake hwq %d\n", txq->id);
iwl_op_mode_queue_not_full(trans->op_mode, txq->id);
}
}
......@@ -644,22 +638,22 @@ static inline void iwl_stop_queue(struct iwl_trans *trans,
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
if (!test_and_set_bit(txq->q.id, trans_pcie->queue_stopped)) {
iwl_op_mode_queue_full(trans->op_mode, txq->q.id);
IWL_DEBUG_TX_QUEUES(trans, "Stop hwq %d\n", txq->q.id);
if (!test_and_set_bit(txq->id, trans_pcie->queue_stopped)) {
iwl_op_mode_queue_full(trans->op_mode, txq->id);
IWL_DEBUG_TX_QUEUES(trans, "Stop hwq %d\n", txq->id);
} else
IWL_DEBUG_TX_QUEUES(trans, "hwq %d already stopped\n",
txq->q.id);
txq->id);
}
static inline bool iwl_queue_used(const struct iwl_queue *q, int i)
static inline bool iwl_queue_used(const struct iwl_txq *q, int i)
{
return q->write_ptr >= q->read_ptr ?
(i >= q->read_ptr && i < q->write_ptr) :
!(i < q->read_ptr && i >= q->write_ptr);
}
static inline u8 get_cmd_index(struct iwl_queue *q, u32 index)
static inline u8 get_cmd_index(struct iwl_txq *q, u32 index)
{
return index & (q->n_window - 1);
}
......
......@@ -1142,7 +1142,7 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
sequence = le16_to_cpu(pkt->hdr.sequence);
index = SEQ_TO_INDEX(sequence);
cmd_index = get_cmd_index(&txq->q, index);
cmd_index = get_cmd_index(txq, index);
if (rxq->id == 0)
iwl_op_mode_rx(trans->op_mode, &rxq->napi,
......
......@@ -1899,7 +1899,7 @@ static void iwl_trans_pcie_freeze_txq_timer(struct iwl_trans *trans,
txq->frozen = freeze;
if (txq->q.read_ptr == txq->q.write_ptr)
if (txq->read_ptr == txq->write_ptr)
goto next_queue;
if (freeze) {
......@@ -1947,7 +1947,7 @@ static void iwl_trans_pcie_block_txq_ptrs(struct iwl_trans *trans, bool block)
txq->block--;
if (!txq->block) {
iwl_write32(trans, HBUS_TARG_WRPTR,
txq->q.write_ptr | (i << 8));
txq->write_ptr | (i << 8));
}
} else if (block) {
txq->block++;
......@@ -1967,14 +1967,14 @@ void iwl_trans_pcie_log_scd_error(struct iwl_trans *trans, struct iwl_txq *txq)
int cnt;
IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n",
txq->q.read_ptr, txq->q.write_ptr);
txq->read_ptr, txq->write_ptr);
if (trans->cfg->use_tfh)
/* TODO: access new SCD registers and dump them */
return;
scd_sram_addr = trans_pcie->scd_base_addr +
SCD_TX_STTS_QUEUE_OFFSET(txq->q.id);
SCD_TX_STTS_QUEUE_OFFSET(txq->id);
iwl_trans_read_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf));
iwl_print_hex_error(trans, buf, sizeof(buf));
......@@ -2009,7 +2009,6 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans, u32 txq_bm)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_txq *txq;
struct iwl_queue *q;
int cnt;
unsigned long now = jiffies;
int ret = 0;
......@@ -2027,13 +2026,12 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans, u32 txq_bm)
IWL_DEBUG_TX_QUEUES(trans, "Emptying queue %d...\n", cnt);
txq = &trans_pcie->txq[cnt];
q = &txq->q;
wr_ptr = ACCESS_ONCE(q->write_ptr);
wr_ptr = ACCESS_ONCE(txq->write_ptr);
while (q->read_ptr != ACCESS_ONCE(q->write_ptr) &&
while (txq->read_ptr != ACCESS_ONCE(txq->write_ptr) &&
!time_after(jiffies,
now + msecs_to_jiffies(IWL_FLUSH_WAIT_MS))) {
u8 write_ptr = ACCESS_ONCE(q->write_ptr);
u8 write_ptr = ACCESS_ONCE(txq->write_ptr);
if (WARN_ONCE(wr_ptr != write_ptr,
"WR pointer moved while flushing %d -> %d\n",
......@@ -2042,7 +2040,7 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans, u32 txq_bm)
usleep_range(1000, 2000);
}
if (q->read_ptr != q->write_ptr) {
if (txq->read_ptr != txq->write_ptr) {
IWL_ERR(trans,
"fail to flush all tx fifo queues Q %d\n", cnt);
ret = -ETIMEDOUT;
......@@ -2210,7 +2208,6 @@ static ssize_t iwl_dbgfs_tx_queue_read(struct file *file,
struct iwl_trans *trans = file->private_data;
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_txq *txq;
struct iwl_queue *q;
char *buf;
int pos = 0;
int cnt;
......@@ -2228,10 +2225,9 @@ static ssize_t iwl_dbgfs_tx_queue_read(struct file *file,
for (cnt = 0; cnt < trans->cfg->base_params->num_of_queues; cnt++) {
txq = &trans_pcie->txq[cnt];
q = &txq->q;
pos += scnprintf(buf + pos, bufsz - pos,
"hwq %.2d: read=%u write=%u use=%d stop=%d need_update=%d frozen=%d%s\n",
cnt, q->read_ptr, q->write_ptr,
cnt, txq->read_ptr, txq->write_ptr,
!!test_bit(cnt, trans_pcie->queue_used),
!!test_bit(cnt, trans_pcie->queue_stopped),
txq->need_update, txq->frozen,
......@@ -2659,7 +2655,7 @@ static struct iwl_trans_dump_data
/* host commands */
len += sizeof(*data) +
cmdq->q.n_window * (sizeof(*txcmd) + TFD_MAX_PAYLOAD_SIZE);
cmdq->n_window * (sizeof(*txcmd) + TFD_MAX_PAYLOAD_SIZE);
/* FW monitor */
if (trans_pcie->fw_mon_page) {
......@@ -2727,9 +2723,9 @@ static struct iwl_trans_dump_data
data->type = cpu_to_le32(IWL_FW_ERROR_DUMP_TXCMD);
txcmd = (void *)data->data;
spin_lock_bh(&cmdq->lock);
ptr = cmdq->q.write_ptr;
for (i = 0; i < cmdq->q.n_window; i++) {
u8 idx = get_cmd_index(&cmdq->q, ptr);
ptr = cmdq->write_ptr;
for (i = 0; i < cmdq->n_window; i++) {
u8 idx = get_cmd_index(cmdq, ptr);
u32 caplen, cmdlen;
cmdlen = iwl_trans_pcie_get_cmdlen(trans, cmdq->tfds +
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册