提交 bb57f0c6 编写于 作者: J Joe Perches 提交者: Linus Torvalds

drivers/block/floppy.c: comment neatening and remove naked ;

Spacing, column alignment and a for loop with
a naked semicolon converted to an assign and while
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 2300f90e
......@@ -1262,9 +1262,12 @@ static inline void perpendicular_mode(void)
default:
DPRINT("Invalid data rate for perpendicular mode!\n");
cont->done(0);
FDCS->reset = 1; /* convenient way to return to
* redo without to much hassle (deep
* stack et al. */
FDCS->reset = 1;
/*
* convenient way to return to
* redo without too much hassle
* (deep stack et al.)
*/
return;
}
} else
......@@ -1977,8 +1980,8 @@ static void floppy_ready(void)
#endif
if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
disk_change(current_drive) && !DP->select_delay)
twaddle(); /* this clears the dcl on certain drive/controller
* combinations */
twaddle(); /* this clears the dcl on certain
* drive/controller combinations */
#ifdef fd_chose_dma_mode
if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
......@@ -2806,15 +2809,14 @@ static int make_raw_rw_request(void)
((CT(COMMAND) == FD_READ ||
(!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
/* not enough space */
) {
max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
/* not enough space */
buffer_track = -1;
buffer_drive = current_drive;
buffer_max = buffer_min = aligned_sector_t;
}
raw_cmd->kernel_data = floppy_track_buffer +
((aligned_sector_t - buffer_min) << 9);
((aligned_sector_t - buffer_min) << 9);
if (CT(COMMAND) == FD_WRITE) {
/* copy write buffer to track buffer.
......@@ -3171,11 +3173,12 @@ static inline int raw_cmd_copyout(int cmd, char __user *param,
COPYOUT(*ptr);
param += sizeof(struct floppy_raw_cmd);
if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
if (ptr->length >= 0
&& ptr->length <= ptr->buffer_length)
ECALL(fd_copyout
(ptr->data, ptr->kernel_data,
ptr->buffer_length - ptr->length));
if (ptr->length >= 0 &&
ptr->length <= ptr->buffer_length) {
long length = ptr->buffer_length - ptr->length;
ECALL(fd_copyout(ptr->data, ptr->kernel_data,
length));
}
}
ptr = ptr->next;
}
......@@ -3827,8 +3830,7 @@ static int check_floppy_change(struct gendisk *disk)
* a disk in the drive, and whether that disk is writable.
*/
static void floppy_rb0_complete(struct bio *bio,
int err)
static void floppy_rb0_complete(struct bio *bio, int err)
{
complete((struct completion *)bio->bi_private);
}
......@@ -4120,9 +4122,9 @@ static int __init floppy_setup(char *str)
else
param = config_params[i].def_param;
if (config_params[i].fn)
config_params[i].
fn(ints, param,
config_params[i].param2);
config_params[i].fn(ints, param,
config_params[i].
param2);
if (config_params[i].var) {
DPRINT("%s=%d\n", str, param);
*config_params[i].var = param;
......@@ -4180,8 +4182,8 @@ static const struct dev_pm_ops floppy_pm_ops = {
static struct platform_driver floppy_driver = {
.driver = {
.name = "floppy",
.pm = &floppy_pm_ops,
.name = "floppy",
.pm = &floppy_pm_ops,
},
};
......@@ -4429,8 +4431,10 @@ static int floppy_request_regions(int fdc)
const struct io_region *p;
for (p = io_regions; p < ARRAY_END(io_regions); p++) {
if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
if (!request_region(FDCS->address + p->offset,
p->size, "floppy")) {
DPRINT("Floppy io-port 0x%04lx in use\n",
FDCS->address + p->offset);
floppy_release_allocated_regions(fdc, p);
return -EBUSY;
}
......@@ -4586,8 +4590,9 @@ static void __init parse_floppy_cfg_string(char *cfg)
char *ptr;
while (*cfg) {
for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++)
;
ptr = cfg;
while (*cfg && *cfg != ' ' && *cfg != '\t')
cfg++;
if (*cfg) {
*cfg = '\0';
cfg++;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册