Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

Documentation/DocBook/80211.tmpl

@@ -268,10 +268,6 @@
 !Finclude/net/mac80211.h ieee80211_ops
 !Finclude/net/mac80211.h ieee80211_alloc_hw
 !Finclude/net/mac80211.h ieee80211_register_hw
-!Finclude/net/mac80211.h ieee80211_get_tx_led_name
-!Finclude/net/mac80211.h ieee80211_get_rx_led_name
-!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
-!Finclude/net/mac80211.h ieee80211_get_radio_led_name
 !Finclude/net/mac80211.h ieee80211_unregister_hw
 !Finclude/net/mac80211.h ieee80211_free_hw
       </chapter>
@@ -382,6 +378,23 @@
         </para>
       </partintro>
 
+      <chapter id="led-support">
+        <title>LED support</title>
+        <para>
+         Mac80211 supports various ways of blinking LEDs. Wherever possible,
+         device LEDs should be exposed as LED class devices and hooked up to
+         the appropriate trigger, which will then be triggered appropriately
+         by mac80211.
+        </para>
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_tpt_blink
+!Finclude/net/mac80211.h ieee80211_tpt_led_trigger_flags
+!Finclude/net/mac80211.h ieee80211_create_tpt_led_trigger
+      </chapter>
+
       <chapter id="hardware-crypto-offload">
         <title>Hardware crypto acceleration</title>
 !Pinclude/net/mac80211.h Hardware crypto acceleration

drivers/net/wireless/ath/ath9k/ar9002_calib.c

@@ -954,6 +954,9 @@ static void ar9002_hw_init_cal_settings(struct ath_hw *ah)
 				&adc_dc_cal_multi_sample;
 		}
 		ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
+
+		if (AR_SREV_9287(ah))
+			ah->supp_cals &= ~ADC_GAIN_CAL;
 	}
 }
 

drivers/net/wireless/ath/ath9k/eeprom_def.c

@@ -226,6 +226,10 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 	    eep->baseEepHeader.pwdclkind == 0)
 		ah->need_an_top2_fixup = 1;
 
+	if ((common->bus_ops->ath_bus_type == ATH_USB) &&
+	    (AR_SREV_9280(ah)))
+		eep->modalHeader[0].xpaBiasLvl = 0;
+
 	return 0;
 }
 

drivers/net/wireless/ath/ath9k/htc.h

@@ -433,6 +433,7 @@ void ath9k_htc_txep(void *priv, struct sk_buff *skb, enum htc_endpoint_id ep_id,
 void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
 			enum htc_endpoint_id ep_id, bool txok);
 
+int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv);
 void ath9k_htc_station_work(struct work_struct *work);
 void ath9k_htc_aggr_work(struct work_struct *work);
 void ath9k_ani_work(struct work_struct *work);;

drivers/net/wireless/ath/ath9k/htc_drv_main.c

@@ -301,6 +301,16 @@ static int ath9k_htc_add_monitor_interface(struct ath9k_htc_priv *priv)
 
 	priv->nstations++;
 
+	/*
+	 * Set chainmask etc. on the target.
+	 */
+	ret = ath9k_htc_update_cap_target(priv);
+	if (ret)
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Failed to update capability in target\n");
+
+	priv->ah->is_monitoring = true;
+
 	return 0;
 
 err_vif:
@@ -328,6 +338,7 @@ static int ath9k_htc_remove_monitor_interface(struct ath9k_htc_priv *priv)
 	}
 
 	priv->nstations--;
+	priv->ah->is_monitoring = false;
 
 	return 0;
 }
@@ -419,7 +430,7 @@ static int ath9k_htc_remove_station(struct ath9k_htc_priv *priv,
 	return 0;
 }
 
-static int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv)
+int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv)
 {
 	struct ath9k_htc_cap_target tcap;
 	int ret;
@@ -1186,6 +1197,20 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 		}
 	}
 
+	/*
+	 * Monitor interface should be added before
+	 * IEEE80211_CONF_CHANGE_CHANNEL is handled.
+	 */
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		if (conf->flags & IEEE80211_CONF_MONITOR) {
+			if (ath9k_htc_add_monitor_interface(priv))
+				ath_err(common, "Failed to set monitor mode\n");
+			else
+				ath_dbg(common, ATH_DBG_CONFIG,
+					"HW opmode set to Monitor mode\n");
+		}
+	}
+
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 		struct ieee80211_channel *curchan = hw->conf.channel;
 		int pos = curchan->hw_value;
@@ -1221,16 +1246,6 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 		ath_update_txpow(priv);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
-		if (conf->flags & IEEE80211_CONF_MONITOR) {
-			if (ath9k_htc_add_monitor_interface(priv))
-				ath_err(common, "Failed to set monitor mode\n");
-			else
-				ath_dbg(common, ATH_DBG_CONFIG,
-					"HW opmode set to Monitor mode\n");
-		}
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
 		mutex_lock(&priv->htc_pm_lock);
 		if (!priv->ps_idle) {

drivers/net/wireless/ath/ath9k/hw.c

@@ -436,9 +436,10 @@ static int ath9k_hw_init_macaddr(struct ath_hw *ah)
 
 static int ath9k_hw_post_init(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int ecode;
 
-	if (!AR_SREV_9271(ah)) {
+	if (common->bus_ops->ath_bus_type != ATH_USB) {
 		if (!ath9k_hw_chip_test(ah))
 			return -ENODEV;
 	}
@@ -1213,7 +1214,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ah->txchainmask = common->tx_chainmask;
 	ah->rxchainmask = common->rx_chainmask;
 
-	if (!ah->chip_fullsleep) {
+	if ((common->bus_ops->ath_bus_type != ATH_USB) && !ah->chip_fullsleep) {
 		ath9k_hw_abortpcurecv(ah);
 		if (!ath9k_hw_stopdmarecv(ah)) {
 			ath_dbg(common, ATH_DBG_XMIT,

drivers/net/wireless/hostap/hostap_cs.c

@@ -518,22 +518,21 @@ static int prism2_config(struct pcmcia_device *link)
 	hw_priv->link = link;
 
 	/*
-	 * Make sure the IRQ handler cannot proceed until at least
-	 * dev->base_addr is initialized.
+	 * We enable IRQ here, but IRQ handler will not proceed
+	 * until dev->base_addr is set below. This protect us from
+	 * receive interrupts when driver is not initialized.
 	 */
-	spin_lock_irqsave(&local->irq_init_lock, flags);
-
 	ret = pcmcia_request_irq(link, prism2_interrupt);
 	if (ret)
-		goto failed_unlock;
+		goto failed;
 
 	ret = pcmcia_enable_device(link);
 	if (ret)
-		goto failed_unlock;
+		goto failed;
 
+	spin_lock_irqsave(&local->irq_init_lock, flags);
 	dev->irq = link->irq;
 	dev->base_addr = link->resource[0]->start;
-
 	spin_unlock_irqrestore(&local->irq_init_lock, flags);
 
 	local->shutdown = 0;
@@ -546,8 +545,6 @@ static int prism2_config(struct pcmcia_device *link)
 
 	return ret;
 
- failed_unlock:
-	spin_unlock_irqrestore(&local->irq_init_lock, flags);
  failed:
 	kfree(hw_priv);
 	prism2_release((u_long)link);

drivers/net/wireless/ipw2x00/ipw2200.c

@@ -1973,6 +1973,13 @@ static void ipw_irq_tasklet(struct ipw_priv *priv)
 
 	inta = ipw_read32(priv, IPW_INTA_RW);
 	inta_mask = ipw_read32(priv, IPW_INTA_MASK_R);
+
+	if (inta == 0xFFFFFFFF) {
+		/* Hardware disappeared */
+		IPW_WARNING("TASKLET INTA == 0xFFFFFFFF\n");
+		/* Only handle the cached INTA values */
+		inta = 0;
+	}
 	inta &= (IPW_INTA_MASK_ALL & inta_mask);
 
 	/* Add any cached INTA values that need to be handled */

drivers/net/wireless/p54/txrx.c

@@ -618,7 +618,7 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
 	else
 		*burst_possible = false;
 
-	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+	if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
 		*flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
 
 	if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)

drivers/ssb/scan.c

@@ -420,6 +420,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			bus->pcicore.dev = dev;
 #endif /* CONFIG_SSB_DRIVER_PCICORE */
 			break;
+		case SSB_DEV_ETHERNET:
+			if (bus->bustype == SSB_BUSTYPE_PCI) {
+				if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+				    (bus->host_pci->device & 0xFF00) == 0x4300) {
+					/* This is a dangling ethernet core on a
+					 * wireless device. Ignore it. */
+					continue;
+				}
+			}
+			break;
 		default:
 			break;
 		}

include/linux/nl80211.h

@@ -148,6 +148,10 @@
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
  * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
  *	the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
@@ -612,7 +616,7 @@ enum nl80211_commands {
  *	consisting of a nested array.
  *
  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
  * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -879,7 +883,9 @@ enum nl80211_commands {
  *	See &enum nl80211_key_default_types.
  *
  * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- * changed once the mesh is active.
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1225,8 +1231,6 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_sta_info_txrate.
@@ -1236,6 +1240,11 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
  * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -1626,7 +1635,7 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  * that it takes for an HWMP information element to propagate across the mesh
  *
- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
  * source mesh point for path selection elements.
@@ -1678,6 +1687,7 @@ enum nl80211_meshconf_params {
  * element that vendors will use to identify the path selection methods and
  * metrics in use.
  *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {

include/net/cfg80211.h

@@ -1103,6 +1103,8 @@ struct cfg80211_pmksa {
  * @change_mpath: change a given mesh path
  * @get_mpath: get a mesh path for the given parameters
  * @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @join_mesh: join the mesh network with the specified parameters
+ * @leave_mesh: leave the current mesh network
  *
  * @get_mesh_config: Get the current mesh configuration
  *

include/net/mac80211.h

@@ -337,6 +337,10 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
  * @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
  *	frame and selects the maximum number of streams that it can use.
+ * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
+ *	the off-channel channel when a remain-on-channel offload is done
+ *	in hardware -- normal packets still flow and are expected to be
+ *	handled properly by the device.
  *
  * Note: If you have to add new flags to the enumeration, then don't
  *	 forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -1753,6 +1757,16 @@ enum ieee80211_ampdu_mlme_action {
  *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
  *
  * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @remain_on_channel: Starts an off-channel period on the given channel, must
+ *	call back to ieee80211_ready_on_channel() when on that channel. Note
+ *	that normal channel traffic is not stopped as this is intended for hw
+ *	offload. Frames to transmit on the off-channel channel are transmitted
+ *	normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
+ *	duration (which will always be non-zero) expires, the driver must call
+ *	ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * @cancel_remain_on_channel: Requests that an ongoing off-channel period is
+ *	aborted before it expires. This callback may sleep.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);