perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE

For consistency reasons this patch renames
ARCH_PERFMON_EVENTSEL0_ENABLE to ARCH_PERFMON_EVENTSEL_ENABLE.

The following is performed:

 $ sed -i -e s/ARCH_PERFMON_EVENTSEL0_ENABLE/ARCH_PERFMON_EVENTSEL_ENABLE/g \
   arch/x86/include/asm/perf_event.h arch/x86/kernel/cpu/perf_event.c \
   arch/x86/kernel/cpu/perf_event_p6.c \
   arch/x86/kernel/cpu/perfctr-watchdog.c \
   arch/x86/oprofile/op_model_amd.c arch/x86/oprofile/op_model_ppro.c
Signed-off-by: NRobert Richter <robert.richter@amd.com>

arch/x86/include/asm/perf_event.h

@@ -18,7 +18,7 @@
 #define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
 #define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
 
-#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_ENABLE			  (1 << 22)
 #define ARCH_PERFMON_EVENTSEL_ANY			  (1 << 21)
 #define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
 #define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)

arch/x86/kernel/cpu/perf_event.c

@@ -553,9 +553,9 @@ static void x86_pmu_disable_all(void)
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
 		rdmsrl(x86_pmu.eventsel + idx, val);
-		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
+		if (!(val & ARCH_PERFMON_EVENTSEL_ENABLE))
 			continue;
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
@@ -590,7 +590,7 @@ static void x86_pmu_enable_all(void)
 			continue;
 
 		val = event->hw.config;
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
@@ -853,7 +853,7 @@ void hw_perf_enable(void)
 static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, int idx)
 {
 	(void)checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
+			      hwc->config | ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
 static inline void x86_pmu_disable_event(struct hw_perf_event *hwc, int idx)

arch/x86/kernel/cpu/perf_event_p6.c

@@ -62,7 +62,7 @@ static void p6_pmu_disable_all(void)
 
 	/* p6 only has one enable register */
 	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsrl(MSR_P6_EVNTSEL0, val);
 }
 
@@ -72,7 +72,7 @@ static void p6_pmu_enable_all(void)
 
 	/* p6 only has one enable register */
 	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsrl(MSR_P6_EVNTSEL0, val);
 }
 
@@ -83,7 +83,7 @@ p6_pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	u64 val = P6_NOP_EVENT;
 
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 
 	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
@@ -95,7 +95,7 @@ static void p6_pmu_enable_event(struct hw_perf_event *hwc, int idx)
 
 	val = hwc->config;
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 
 	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }

arch/x86/kernel/cpu/perfctr-watchdog.c

@@ -680,7 +680,7 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 	cpu_nmi_set_wd_enabled();
 
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	evntsel |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsr(evntsel_msr, evntsel, 0);
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;

arch/x86/oprofile/op_model_amd.c

@@ -171,7 +171,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 			continue;
 		}
 		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
 			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
@@ -398,7 +398,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
@@ -418,7 +418,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 

arch/x86/oprofile/op_model_ppro.c

@@ -88,7 +88,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 			continue;
 		}
 		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
 			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
@@ -166,7 +166,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
@@ -184,7 +184,7 @@ static void ppro_stop(struct op_msrs const * const msrs)
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 }