提交 b97cd891 编写于 作者: A Amit Cohen 提交者: David S. Miller

mlxsw: Remove 56G speed support

Commit 275e928f ("mlxsw: spectrum: Prevent force of 56G") prevented
the driver from setting a speed of 56G when auto-negotiation is off.
This is the only speed supported by mlxsw that cannot be set when
auto-negotiation is off, which makes it difficult to write generic
tests.

Further, the speed is not supported by newer ASICs such as Spectrum-2
and to the best of our knowledge it is not used by current users.

Therefore, remove 56G support from mlxsw.
Signed-off-by: NAmit Cohen <amitc@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 95fb8bb3
......@@ -4126,7 +4126,6 @@ MLXSW_ITEM32(reg, ptys, ext_eth_proto_cap, 0x08, 0, 32);
#define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5)
#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6)
#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7)
#define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4 BIT(8)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR BIT(13)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR BIT(14)
......
......@@ -2608,26 +2608,6 @@ static const struct mlxsw_sp1_port_link_mode mlxsw_sp1_port_link_mode[] = {
.mask_ethtool = ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT,
.speed = SPEED_50000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4,
.mask_ethtool = ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT,
.speed = SPEED_56000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4,
.mask_ethtool = ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT,
.speed = SPEED_56000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4,
.mask_ethtool = ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT,
.speed = SPEED_56000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4,
.mask_ethtool = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT,
.speed = SPEED_56000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4,
.mask_ethtool = ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT,
......@@ -3301,10 +3281,6 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev,
ops->reg_ptys_eth_unpack(mlxsw_sp, ptys_pl, &eth_proto_cap, NULL, NULL);
autoneg = cmd->base.autoneg == AUTONEG_ENABLE;
if (!autoneg && cmd->base.speed == SPEED_56000) {
netdev_err(dev, "56G not supported with autoneg off\n");
return -EINVAL;
}
eth_proto_new = autoneg ?
ops->to_ptys_advert_link(mlxsw_sp, cmd) :
ops->to_ptys_speed(mlxsw_sp, cmd->base.speed);
......
......@@ -636,12 +636,6 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2,
.speed = 50000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4,
.supported = SUPPORTED_56000baseKR4_Full,
.advertised = ADVERTISED_56000baseKR4_Full,
.speed = 56000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 |
MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 |
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册