提交 b8df0ea2 编写于 作者: A Arnd Bergmann

Merge branch 'picoxcell/soc' into next/soc

Picochip picoXcell device tree bindings.
========================================
Required root node properties:
- compatible:
- "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
- "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
- "picochip,pc3x3" : picoXcell PC3X3 device based board.
- "picochip,pc3x2" : picoXcell PC3X2 device based board.
Timers required properties:
- compatible = "picochip,pc3x2-timer"
- interrupts : The single IRQ line for the timer.
- clock-freq : The frequency in HZ of the timer.
- reg : The register bank for the timer.
Note: two timers are required - one for the scheduler clock and one for the
event tick/NOHZ.
VIC required properties:
- compatible = "arm,pl192-vic".
- interrupt-controller.
- reg : The register bank for the device.
- #interrupt-cells : Must be 1.
......@@ -643,6 +643,24 @@ config ARCH_TEGRA
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
config ARCH_PICOXCELL
bool "Picochip picoXcell"
select ARCH_REQUIRE_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_SCHED_CLOCK
select HAVE_TCM
select NO_IOPORT
select USE_OF
help
This enables support for systems based on the Picochip picoXcell
family of Femtocell devices. The picoxcell support requires device tree
for all boards.
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
......
......@@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
......
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X2";
compatible = "picochip,pc3x2";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,1176jz-s";
clock-frequency = <400000000>;
reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
i-cache-size = <32768>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
pclk: clock@0 {
compatible = "fixed-clock";
clock-outputs = "bus", "pclk";
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
paxi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x80000000 0x400000>;
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
interrupts = <26>;
};
vic0: interrupt-controller@60000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x60000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@64000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x64000 0x1000>;
#interrupt-cells = <1>;
};
fuse: picoxcell-fuse@80000 {
compatible = "picoxcell,fuse-pc3x2";
reg = <0x80000 0x10000>;
};
ssi: picoxcell-spi@90000 {
compatible = "picoxcell,spi";
reg = <0x90000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <10>;
};
ipsec: spacc@100000 {
compatible = "picochip,spacc-ipsec";
reg = <0x100000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
ref-clock = <&pclk>, "ref";
};
srtp: spacc@140000 {
compatible = "picochip,spacc-srtp";
reg = <0x140000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <23>;
};
l2_engine: spacc@180000 {
compatible = "picochip,spacc-l2";
reg = <0x180000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <22>;
ref-clock = <&pclk>, "ref";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
rtc0: rtc@00000 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
interrupt-parent = <&vic1>;
interrupts = <8>;
};
timer0: timer@10000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <4>;
clock-freq = <200000000>;
reg = <0x10000 0x14>;
};
timer1: timer@10014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <5>;
clock-freq = <200000000>;
reg = <0x10014 0x14>;
};
timer2: timer@10028 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <6>;
clock-freq = <200000000>;
reg = <0x10028 0x14>;
};
timer3: timer@1003c {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <7>;
clock-freq = <200000000>;
reg = <0x1003c 0x14>;
};
gpio: gpio@20000 {
compatible = "snps,dw-apb-gpio";
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x50>;
regoffset-set = <0x00>;
regoffset-dirout = <0x04>;
};
bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x54>;
regoffset-set = <0x0c>;
regoffset-dirout = <0x10>;
};
};
uart0: uart@30000 {
compatible = "snps,dw-apb-uart";
reg = <0x30000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: uart@40000 {
compatible = "snps,dw-apb-uart";
reg = <0x40000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <9>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
wdog: watchdog@50000 {
compatible = "snps,dw-apb-wdg";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <11>;
bus-clock = <&pclk>, "bus";
};
};
};
rwid-axi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
ebi@50000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x08000000
1 0 0x48000000 0x08000000
2 0 0x50000000 0x08000000
3 0 0x58000000 0x08000000>;
};
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x2";
reg = <0xc0000000 0x10000>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X3";
compatible = "picochip,pc3x3";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,1176jz-s";
cpu-clock = <&arm_clk>, "cpu";
reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
i-cache-size = <32768>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
clkgate: clkgate@800a0048 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x800a0048 4>;
compatible = "picochip,pc3x3-clk-gate";
tzprot_clk: clock@0 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <0>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
spi_clk: clock@1 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <1>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
dmac0_clk: clock@2 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <2>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
dmac1_clk: clock@3 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <3>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
ebi_clk: clock@4 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <4>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
ipsec_clk: clock@5 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <5>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
l2_clk: clock@6 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <6>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
trng_clk: clock@7 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <7>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
fuse_clk: clock@8 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <8>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
otp_clk: clock@9 {
compatible = "picochip,pc3x3-gated-clk";
clock-outputs = "bus";
picochip,clk-disable-bit = <9>;
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
arm_clk: clock@11 {
compatible = "picochip,pc3x3-pll";
reg = <0x800a0050 0x8>;
picochip,min-freq = <140000000>;
picochip,max-freq = <700000000>;
ref-clock = <&ref_clk>, "ref";
clock-outputs = "cpu";
};
pclk: clock@12 {
compatible = "fixed-clock";
clock-outputs = "bus", "pclk";
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
paxi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x80000000 0x400000>;
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <26>;
};
vic0: interrupt-controller@60000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x60000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@64000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x64000 0x1000>;
#interrupt-cells = <1>;
};
fuse: picoxcell-fuse@80000 {
compatible = "picoxcell,fuse-pc3x3";
reg = <0x80000 0x10000>;
};
ssi: picoxcell-spi@90000 {
compatible = "picoxcell,spi";
reg = <0x90000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <10>;
};
ipsec: spacc@100000 {
compatible = "picochip,spacc-ipsec";
reg = <0x100000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
ref-clock = <&ipsec_clk>, "ref";
};
srtp: spacc@140000 {
compatible = "picochip,spacc-srtp";
reg = <0x140000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <23>;
};
l2_engine: spacc@180000 {
compatible = "picochip,spacc-l2";
reg = <0x180000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <22>;
ref-clock = <&l2_clk>, "ref";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
rtc0: rtc@00000 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
interrupt-parent = <&vic0>;
interrupts = <8>;
};
timer0: timer@10000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <4>;
clock-freq = <200000000>;
reg = <0x10000 0x14>;
};
timer1: timer@10014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <5>;
clock-freq = <200000000>;
reg = <0x10014 0x14>;
};
gpio: gpio@20000 {
compatible = "snps,dw-apb-gpio";
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x50>;
regoffset-set = <0x00>;
regoffset-dirout = <0x04>;
};
bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <16>;
regoffset-dat = <0x54>;
regoffset-set = <0x0c>;
regoffset-dirout = <0x10>;
};
bankd: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <30>;
regoffset-dat = <0x5c>;
regoffset-set = <0x24>;
regoffset-dirout = <0x28>;
};
};
uart0: uart@30000 {
compatible = "snps,dw-apb-uart";
reg = <0x30000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: uart@40000 {
compatible = "snps,dw-apb-uart";
reg = <0x40000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <9>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
wdog: watchdog@50000 {
compatible = "snps,dw-apb-wdg";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <11>;
bus-clock = <&pclk>, "bus";
};
timer2: timer@60000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <6>;
clock-freq = <200000000>;
reg = <0x60000 0x14>;
};
timer3: timer@60014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <7>;
clock-freq = <200000000>;
reg = <0x60014 0x14>;
};
};
};
rwid-axi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
ebi@50000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x08000000
1 0 0x48000000 0x08000000
2 0 0x50000000 0x08000000
3 0 0x58000000 0x08000000>;
};
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x3";
reg = <0xc0000000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
otp@ffff8000 {
compatible = "picochip,otp-pc3x3";
reg = <0xffff8000 0x8000>;
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "picoxcell-pc3x2.dtsi"
/ {
model = "Picochip PC7302 (PC3X2)";
compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
};
chosen {
linux,stdout-path = &uart0;
};
clocks {
ref_clk: clock@1 {
compatible = "fixed-clock";
clock-outputs = "ref";
clock-frequency = <20000000>;
};
};
rwid-axi {
ebi@50000000 {
nand: gpio-nand@2,0 {
compatible = "gpio-control-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <2 0x0000 0x1000>;
bus-clock = <&pclk>, "bus";
gpio-control-nand,io-sync-reg =
<0x00000000 0x80220000>;
gpios = <&banka 1 0 /* rdy */
&banka 2 0 /* nce */
&banka 3 0 /* ale */
&banka 4 0 /* cle */
0 /* nwp */>;
boot@100000 {
label = "Boot";
reg = <0x100000 0x80000>;
};
redundant-boot@200000 {
label = "Redundant Boot";
reg = <0x200000 0x80000>;
};
boot-env@300000 {
label = "Boot Evironment";
reg = <0x300000 0x20000>;
};
redundant-boot-env@320000 {
label = "Redundant Boot Environment";
reg = <0x300000 0x20000>;
};
kernel@380000 {
label = "Kernel";
reg = <0x380000 0x800000>;
};
fs@b80000 {
label = "File System";
reg = <0xb80000 0xf480000>;
};
};
};
};
};
/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "picoxcell-pc3x3.dtsi"
/ {
model = "Picochip PC7302 (PC3X3)";
compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
};
chosen {
linux,stdout-path = &uart0;
};
clocks {
ref_clk: clock@10 {
compatible = "fixed-clock";
clock-outputs = "ref";
clock-frequency = <20000000>;
};
clkgate: clkgate@800a0048 {
clock@4 {
picochip,clk-no-disable;
};
};
};
rwid-axi {
ebi@50000000 {
nand: gpio-nand@2,0 {
compatible = "gpio-control-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <2 0x0000 0x1000>;
bus-clock = <&ebi_clk>, "bus";
gpio-control-nand,io-sync-reg =
<0x00000000 0x80220000>;
gpios = <&banka 1 0 /* rdy */
&banka 2 0 /* nce */
&banka 3 0 /* ale */
&banka 4 0 /* cle */
0 /* nwp */>;
boot@100000 {
label = "Boot";
reg = <0x100000 0x80000>;
};
redundant-boot@200000 {
label = "Redundant Boot";
reg = <0x200000 0x80000>;
};
boot-env@300000 {
label = "Boot Evironment";
reg = <0x300000 0x20000>;
};
redundant-boot-env@320000 {
label = "Redundant Boot Environment";
reg = <0x300000 0x20000>;
};
kernel@380000 {
label = "Kernel";
reg = <0x380000 0x800000>;
};
fs@b80000 {
label = "File System";
reg = <0xb80000 0xf480000>;
};
};
};
};
};
obj-y := common.o
obj-y += time.o
obj-y += io.o
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* All enquiries to support@picochip.com
*/
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/map.h>
#include <mach/picoxcell_soc.h>
#include "common.h"
static void __init picoxcell_init_machine(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *picoxcell_dt_match[] = {
"picochip,pc3x2",
"picochip,pc3x3",
NULL
};
static const struct of_device_id vic_of_match[] __initconst = {
{ .compatible = "arm,pl192-vic" },
{ /* Sentinel */ }
};
static void __init picoxcell_init_irq(void)
{
vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
}
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
.nr_irqs = ARCH_NR_IRQS,
.init_irq = picoxcell_init_irq,
.timer = &picoxcell_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
MACHINE_END
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* All enquiries to support@picochip.com
*/
#ifndef __PICOXCELL_COMMON_H__
#define __PICOXCELL_COMMON_H__
#include <asm/mach/time.h>
extern struct sys_timer picoxcell_timer;
extern void picoxcell_map_io(void);
#endif /* __PICOXCELL_COMMON_H__ */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
* accesses to the 8250.
*/
#include <linux/serial_reg.h>
#include <mach/hardware.h>
#include <mach/map.h>
#define UART_SHIFT 2
.macro addruart, rp, rv
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
ldr \rp, =PICOXCELL_UART1_BASE
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_TX << UART_SHIFT]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1002b
.endm
/* The UART's don't have any flow control IO's wired up. */
.macro waituart,rd,rx
.endm
/*
* entry-macro.S
*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* Low-level IRQ helper macros for picoXcell platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/map.h>
#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
#include <asm/entry-macro-vic2.S>
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This file contains the hardware definitions of the picoXcell SoC devices.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <mach/picoxcell_soc.h>
#endif
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
/* No ioports, but needed for driver compatibility. */
#define __io(a) __typesafe_io(a)
/* No PCI possible on picoxcell. */
#define __mem_pci(a) (a)
#endif /* __ASM_ARM_ARCH_IO_H */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This file contains the hardware definitions of the picoXcell SoC devices.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define ARCH_NR_IRQS 64
#define NR_IRQS (128 + ARCH_NR_IRQS)
#define IRQ_VIC0_BASE 0
#define IRQ_VIC1_BASE 32
#endif /* __MACH_IRQS_H */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __PICOXCELL_MAP_H__
#define __PICOXCELL_MAP_H__
#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
#ifdef __ASSEMBLY__
#define IO_ADDRESS(x) PHYS_TO_IO((x))
#else
#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
#endif
#endif /* __PICOXCELL_MAP_H__ */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This file contains the hardware definitions of the picoXcell SoC devices.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __PICOXCELL_SOC_H__
#define __PICOXCELL_SOC_H__
#define PICOXCELL_UART1_BASE 0x80230000
#define PICOXCELL_PERIPH_BASE 0x80000000
#define PICOXCELL_PERIPH_LENGTH SZ_4M
#define PICOXCELL_VIC0_BASE 0x80060000
#define PICOXCELL_VIC1_BASE 0x80064000
#endif /* __PICOXCELL_SOC_H__ */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching and wait for interrupt
* tricks.
*/
cpu_do_idle();
}
static inline void arch_reset(int mode, const char *cmd)
{
/* Watchdog reset to go here. */
}
#endif /* __ASM_ARCH_SYSTEM_H */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __TIMEX_H__
#define __TIMEX_H__
/* Bogus value to allow the kernel to compile. */
#define CLOCK_TICK_RATE 1000000
#endif /* __TIMEX_H__ */
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define putc(c)
#define flush()
#define arch_decomp_setup()
#define arch_decomp_wdog()
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define VMALLOC_END 0xfe000000UL
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* All enquiries to support@picochip.com
*/
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/picoxcell_soc.h>
#include "common.h"
void __init picoxcell_map_io(void)
{
struct map_desc io_map = {
.virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
.pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
.length = PICOXCELL_PERIPH_LENGTH,
.type = MT_DEVICE,
};
iotable_init(&io_map, 1);
}
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* All enquiries to support@picochip.com
*/
#include <linux/dw_apb_timer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
#include "common.h"
static void timer_get_base_and_rate(struct device_node *np,
void __iomem **base, u32 *rate)
{
*base = of_iomap(np, 0);
if (!*base)
panic("Unable to map regs for %s", np->name);
if (of_property_read_u32(np, "clock-freq", rate))
panic("No clock-freq property for %s", np->name);
}
static void picoxcell_add_clockevent(struct device_node *event_timer)
{
void __iomem *iobase;
struct dw_apb_clock_event_device *ced;
u32 irq, rate;
irq = irq_of_parse_and_map(event_timer, 0);
if (irq == NO_IRQ)
panic("No IRQ for clock event timer");
timer_get_base_and_rate(event_timer, &iobase, &rate);
ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
rate);
if (!ced)
panic("Unable to initialise clockevent device");
dw_apb_clockevent_register(ced);
}
static void picoxcell_add_clocksource(struct device_node *source_timer)
{
void __iomem *iobase;
struct dw_apb_clocksource *cs;
u32 rate;
timer_get_base_and_rate(source_timer, &iobase, &rate);
cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
if (!cs)
panic("Unable to initialise clocksource device");
dw_apb_clocksource_start(cs);
dw_apb_clocksource_register(cs);
}
static DEFINE_CLOCK_DATA(cd);
static void __iomem *sched_io_base;
unsigned long long notrace sched_clock(void)
{
cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
static void notrace picoxcell_update_sched_clock(void)
{
cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
update_sched_clock(&cd, cyc, (u32)~0);
}
static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
{ .compatible = "picochip,pc3x2-rtc" },
{ /* Sentinel */ },
};
static void picoxcell_init_sched_clock(void)
{
struct device_node *sched_timer;
u32 rate;
sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
if (!sched_timer)
panic("No RTC for sched clock to use");
timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
of_node_put(sched_timer);
init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
}
static const struct of_device_id picoxcell_timer_ids[] __initconst = {
{ .compatible = "picochip,pc3x2-timer" },
{},
};
static void __init picoxcell_timer_init(void)
{
struct device_node *event_timer, *source_timer;
event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
if (!event_timer)
panic("No timer for clockevent");
picoxcell_add_clockevent(event_timer);
source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
if (!source_timer)
panic("No timer for clocksource");
picoxcell_add_clocksource(source_timer);
of_node_put(source_timer);
picoxcell_init_sched_clock();
}
struct sys_timer picoxcell_timer = {
.init = picoxcell_timer_init,
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册