[SCSI] mpt2sas: Added expander phy control support

Added support to send link resets, hard resets, enable/disable phys, and
changing link rates for for expanders.  This will be exported to
attributes within the sas transport layer.  A new wrapper function was
added for sending SMP passthru to expanders for phy control.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

drivers/scsi/mpt2sas/mpt2sas_transport.c

@@ -940,16 +940,6 @@ rphy_to_ioc(struct sas_rphy *rphy)
 	return shost_priv(shost);
 }
 
-static struct _sas_phy *
-_transport_find_local_phy(struct MPT2SAS_ADAPTER *ioc, struct sas_phy *phy)
-{
-	int i;
-
-	for (i = 0; i < ioc->sas_hba.num_phys; i++)
-		if (ioc->sas_hba.phy[i].phy == phy)
-			return(&ioc->sas_hba.phy[i]);
-	return NULL;
-}
 
 /* report phy error log structure */
 struct phy_error_log_request{
@@ -1270,32 +1260,260 @@ _transport_get_bay_identifier(struct sas_rphy *rphy)
 	return sas_device->slot;
 }
 
+/* phy control request structure */
+struct phy_control_request{
+	u8 smp_frame_type; /* 0x40 */
+	u8 function; /* 0x91 */
+	u8 allocated_response_length;
+	u8 request_length; /* 0x09 */
+	u16 expander_change_count;
+	u8 reserved_1[3];
+	u8 phy_identifier;
+	u8 phy_operation;
+	u8 reserved_2[13];
+	u64 attached_device_name;
+	u8 programmed_min_physical_link_rate;
+	u8 programmed_max_physical_link_rate;
+	u8 reserved_3[6];
+};
+
+/* phy control reply structure */
+struct phy_control_reply{
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x11 */
+	u8 function_result;
+	u8 response_length;
+};
+
+#define SMP_PHY_CONTROL_LINK_RESET	(0x01)
+#define SMP_PHY_CONTROL_HARD_RESET	(0x02)
+#define SMP_PHY_CONTROL_DISABLE		(0x03)
+
+/**
+ * _transport_expander_phy_control - expander phy control
+ * @ioc: per adapter object
+ * @phy: The sas phy object
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_expander_phy_control(struct MPT2SAS_ADAPTER *ioc,
+    struct sas_phy *phy, u8 phy_operation)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct phy_control_request *phy_control_request;
+	struct phy_control_reply *phy_control_reply;
+	int rc;
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	void *psge;
+	u32 sgl_flags;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	u32 sz;
+	u64 *sas_address_le;
+	u16 wait_state_count;
+
+	if (ioc->shost_recovery) {
+		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
+		printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT2_CMD_PENDING;
+
+	wait_state_count = 0;
+	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			printk(MPT2SAS_ERR_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+		printk(MPT2SAS_INFO_FMT "%s: waiting for "
+		    "operational state(count=%d)\n", ioc->name,
+		    __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	sz = sizeof(struct phy_control_request) +
+	    sizeof(struct phy_control_reply);
+	data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
+	if (!data_out) {
+		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt2sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	rc = -EINVAL;
+	memset(data_out, 0, sz);
+	phy_control_request = data_out;
+	phy_control_request->smp_frame_type = 0x40;
+	phy_control_request->function = 0x91;
+	phy_control_request->request_length = 9;
+	phy_control_request->allocated_response_length = 0;
+	phy_control_request->phy_identifier = phy->number;
+	phy_control_request->phy_operation = phy_operation;
+	phy_control_request->programmed_min_physical_link_rate =
+	    phy->minimum_linkrate << 4;
+	phy_control_request->programmed_max_physical_link_rate =
+	    phy->maximum_linkrate << 4;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	sas_address_le = (u64 *)&mpi_request->SASAddress;
+	*sas_address_le = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->RequestDataLength =
+	    cpu_to_le16(sizeof(struct phy_error_log_request));
+	psge = &mpi_request->SGL;
+
+	/* WRITE sgel first */
+	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+	ioc->base_add_sg_single(psge, sgl_flags |
+	    sizeof(struct phy_control_request), data_out_dma);
+
+	/* incr sgel */
+	psge += ioc->sge_size;
+
+	/* READ sgel last */
+	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+	    MPI2_SGE_FLAGS_END_OF_LIST);
+	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+	ioc->base_add_sg_single(psge, sgl_flags |
+	    sizeof(struct phy_control_reply), data_out_dma +
+	    sizeof(struct phy_control_request));
+
+	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_control - "
+	    "send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", ioc->name,
+	    (unsigned long long)phy->identify.sas_address, phy->number,
+	    phy_operation));
+	mpt2sas_base_put_smid_default(ioc, smid);
+	init_completion(&ioc->transport_cmds.done);
+	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
+	    10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
+		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_control - "
+	    "complete\n", ioc->name));
+
+	if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
+		    "phy_control - reply data transfer size(%d)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct phy_control_reply))
+			goto out;
+
+		phy_control_reply = data_out +
+		    sizeof(struct phy_control_request);
+
+		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
+		    "phy_control - function_result(%d)\n",
+		    ioc->name, phy_control_reply->function_result));
+
+		rc = 0;
+	} else
+		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
+		    "phy_control - no reply\n", ioc->name));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
+	if (data_out)
+		pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
 /**
  * _transport_phy_reset -
  * @phy: The sas phy object
  * @hard_reset:
  *
- * Only support sas_host direct attached phys.
  * Returns 0 for success, non-zero for failure.
  */
 static int
 _transport_phy_reset(struct sas_phy *phy, int hard_reset)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	struct _sas_phy *mpt2sas_phy;
 	Mpi2SasIoUnitControlReply_t mpi_reply;
 	Mpi2SasIoUnitControlRequest_t mpi_request;
+	unsigned long flags;
 
-	mpt2sas_phy = _transport_find_local_phy(ioc, phy);
-
-	if (!mpt2sas_phy) /* this phy not on sas_host */
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_expander_phy_control(ioc, phy,
+		    (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET :
+		    SMP_PHY_CONTROL_LINK_RESET);
+
+	/* handle hba phys */
 	memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t));
 	mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
 	mpi_request.Operation = hard_reset ?
 	    MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET;
-	mpi_request.PhyNum = mpt2sas_phy->phy_id;
+	mpi_request.PhyNum = phy->number;
 
 	if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
@@ -1306,8 +1524,7 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset)
 	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
 		printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
 		    "(0x%04x), loginfo(0x%08x)\n", ioc->name,
-		    mpt2sas_phy->phy_id,
-		    le16_to_cpu(mpi_reply.IOCStatus),
+		    phy->number, le16_to_cpu(mpi_reply.IOCStatus),
 		    le32_to_cpu(mpi_reply.IOCLogInfo));
 
 	return 0;
@@ -1325,17 +1542,28 @@ static int
 _transport_phy_enable(struct sas_phy *phy, int enable)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	struct _sas_phy *mpt2sas_phy;
 	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
 	Mpi2ConfigReply_t mpi_reply;
 	u16 ioc_status;
 	u16 sz;
 	int rc = 0;
+	unsigned long flags;
 
-	mpt2sas_phy = _transport_find_local_phy(ioc, phy);
-
-	if (!mpt2sas_phy) /* this phy not on sas_host */
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_expander_phy_control(ioc, phy,
+		    (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET :
+		    SMP_PHY_CONTROL_DISABLE);
+
+	/* handle hba phys */
 
 	/* sas_iounit page 1 */
 	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
@@ -1364,14 +1592,18 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
 	}
 
 	if (enable)
-		sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+		sas_iounit_pg1->PhyData[phy->number].PhyFlags
 		    &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
 	else
-		sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+		sas_iounit_pg1->PhyData[phy->number].PhyFlags
 		    |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
 
 	mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
 
+	/* link reset */
+	if (enable)
+		_transport_phy_reset(phy, 0);
+
  out:
 	kfree(sas_iounit_pg1);
 	return rc;
@@ -1389,7 +1621,6 @@ static int
 _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	struct _sas_phy *mpt2sas_phy;
 	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
 	Mpi2SasPhyPage0_t phy_pg0;
 	Mpi2ConfigReply_t mpi_reply;
@@ -1397,11 +1628,15 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
 	u16 sz;
 	int i;
 	int rc = 0;
+	unsigned long flags;
 
-	mpt2sas_phy = _transport_find_local_phy(ioc, phy);
-
-	if (!mpt2sas_phy) /* this phy not on sas_host */
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 
 	if (!rates->minimum_linkrate)
 		rates->minimum_linkrate = phy->minimum_linkrate;
@@ -1413,6 +1648,16 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
 	else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
 		rates->maximum_linkrate = phy->maximum_linkrate_hw;
 
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address) {
+		phy->minimum_linkrate = rates->minimum_linkrate;
+		phy->maximum_linkrate = rates->maximum_linkrate;
+		return _transport_expander_phy_control(ioc, phy,
+		    SMP_PHY_CONTROL_LINK_RESET);
+	}
+
+	/* handle hba phys */
+
 	/* sas_iounit page 1 */
 	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
 	    sizeof(Mpi2SasIOUnit1PhyData_t));
@@ -1440,7 +1685,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
 	}
 
 	for (i = 0; i < ioc->sas_hba.num_phys; i++) {
-		if (mpt2sas_phy->phy_id != i) {
+		if (phy->number != i) {
 			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
 			    (ioc->sas_hba.phy[i].phy->minimum_linkrate +
 			    (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
@@ -1464,7 +1709,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
 
 	/* read phy page 0, then update the rates in the sas transport phy */
 	if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
-	    mpt2sas_phy->phy_id)) {
+	    phy->number)) {
 		phy->minimum_linkrate = _transport_convert_phy_link_rate(
 		    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
 		phy->maximum_linkrate = _transport_convert_phy_link_rate(