提交 b796b971 编写于 作者: D Dhinakaran Pandiyan 提交者: Paulo Zanoni

drm/i915/icl: Handle hotplug interrupts for DP over TBT

This patch enables hotplug interrupts for DP over TBT output on TC
ports. The TBT interrupts are enabled and handled irrespective of the
actual output type which could be DP Alternate, DP over TBT, native DP
or native HDMI.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-3-paulo.r.zanoni@intel.com
上级 121e758e
......@@ -115,11 +115,11 @@ static const u32 hpd_bxt[HPD_NUM_PINS] = {
[HPD_PORT_C] = BXT_DE_PORT_HP_DDIC
};
static const u32 hpd_tc_gen11[HPD_NUM_PINS] = {
[HPD_PORT_C] = GEN11_TC1_HOTPLUG,
[HPD_PORT_D] = GEN11_TC2_HOTPLUG,
[HPD_PORT_E] = GEN11_TC3_HOTPLUG,
[HPD_PORT_F] = GEN11_TC4_HOTPLUG
static const u32 hpd_gen11[HPD_NUM_PINS] = {
[HPD_PORT_C] = GEN11_TC1_HOTPLUG | GEN11_TBT1_HOTPLUG,
[HPD_PORT_D] = GEN11_TC2_HOTPLUG | GEN11_TBT2_HOTPLUG,
[HPD_PORT_E] = GEN11_TC3_HOTPLUG | GEN11_TBT3_HOTPLUG,
[HPD_PORT_F] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG
};
/* IIR can theoretically queue up two events. Be paranoid. */
......@@ -2624,20 +2624,35 @@ static void bxt_hpd_irq_handler(struct drm_i915_private *dev_priv,
static void gen11_hpd_irq_handler(struct drm_i915_private *dev_priv, u32 iir)
{
u32 pin_mask = 0, long_mask = 0;
u32 trigger_tc, dig_hotplug_reg;
u32 trigger_tc = iir & GEN11_DE_TC_HOTPLUG_MASK;
u32 trigger_tbt = iir & GEN11_DE_TBT_HOTPLUG_MASK;
trigger_tc = iir & GEN11_DE_TC_HOTPLUG_MASK;
if (trigger_tc) {
u32 dig_hotplug_reg;
dig_hotplug_reg = I915_READ(GEN11_TC_HOTPLUG_CTL);
I915_WRITE(GEN11_TC_HOTPLUG_CTL, dig_hotplug_reg);
intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, trigger_tc,
dig_hotplug_reg, hpd_tc_gen11,
dig_hotplug_reg, hpd_gen11,
gen11_port_hotplug_long_detect);
}
if (trigger_tbt) {
u32 dig_hotplug_reg;
dig_hotplug_reg = I915_READ(GEN11_TBT_HOTPLUG_CTL);
I915_WRITE(GEN11_TBT_HOTPLUG_CTL, dig_hotplug_reg);
intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, trigger_tbt,
dig_hotplug_reg, hpd_gen11,
gen11_port_hotplug_long_detect);
}
if (pin_mask)
intel_hpd_irq_handler(dev_priv, pin_mask, long_mask);
} else {
else
DRM_ERROR("Unexpected DE HPD interrupt 0x%08x\n", iir);
}
}
static irqreturn_t
......@@ -3695,6 +3710,13 @@ static void gen11_hpd_detection_setup(struct drm_i915_private *dev_priv)
GEN11_HOTPLUG_CTL_ENABLE(PORT_TC3) |
GEN11_HOTPLUG_CTL_ENABLE(PORT_TC4);
I915_WRITE(GEN11_TC_HOTPLUG_CTL, hotplug);
hotplug = I915_READ(GEN11_TBT_HOTPLUG_CTL);
hotplug |= GEN11_HOTPLUG_CTL_ENABLE(PORT_TC1) |
GEN11_HOTPLUG_CTL_ENABLE(PORT_TC2) |
GEN11_HOTPLUG_CTL_ENABLE(PORT_TC3) |
GEN11_HOTPLUG_CTL_ENABLE(PORT_TC4);
I915_WRITE(GEN11_TBT_HOTPLUG_CTL, hotplug);
}
static void gen11_hpd_irq_setup(struct drm_i915_private *dev_priv)
......@@ -3702,8 +3724,8 @@ static void gen11_hpd_irq_setup(struct drm_i915_private *dev_priv)
u32 hotplug_irqs, enabled_irqs;
u32 val;
enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_tc_gen11);
hotplug_irqs = GEN11_DE_TC_HOTPLUG_MASK;
enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_gen11);
hotplug_irqs = GEN11_DE_TC_HOTPLUG_MASK | GEN11_DE_TBT_HOTPLUG_MASK;
val = I915_READ(GEN11_DE_HPD_IMR);
val &= ~hotplug_irqs;
......@@ -4088,7 +4110,8 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
if (INTEL_GEN(dev_priv) >= 11) {
u32 de_hpd_masked = 0;
u32 de_hpd_enables = GEN11_DE_TC_HOTPLUG_MASK;
u32 de_hpd_enables = GEN11_DE_TC_HOTPLUG_MASK |
GEN11_DE_TBT_HOTPLUG_MASK;
GEN3_IRQ_INIT(GEN11_DE_HPD_, ~de_hpd_masked, de_hpd_enables);
gen11_hpd_detection_setup(dev_priv);
......
......@@ -7097,7 +7097,16 @@ enum {
GEN11_TC3_HOTPLUG | \
GEN11_TC2_HOTPLUG | \
GEN11_TC1_HOTPLUG)
#define GEN11_TBT4_HOTPLUG (1 << 3)
#define GEN11_TBT3_HOTPLUG (1 << 2)
#define GEN11_TBT2_HOTPLUG (1 << 1)
#define GEN11_TBT1_HOTPLUG (1 << 0)
#define GEN11_DE_TBT_HOTPLUG_MASK (GEN11_TBT4_HOTPLUG | \
GEN11_TBT3_HOTPLUG | \
GEN11_TBT2_HOTPLUG | \
GEN11_TBT1_HOTPLUG)
#define GEN11_TBT_HOTPLUG_CTL _MMIO(0x44030)
#define GEN11_TC_HOTPLUG_CTL _MMIO(0x44038)
#define GEN11_HOTPLUG_CTL_ENABLE(tc_port) (8 << (tc_port) * 4)
#define GEN11_HOTPLUG_CTL_LONG_DETECT(tc_port) (2 << (tc_port) * 4)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册