iommu: Allow io-pgtable to be used outside of drivers/iommu/

Move io-pgtable.h to include/linux/ and export alloc_io_pgtable_ops
and free_io_pgtable_ops. This enables drivers outside drivers/iommu/ to
use the page table library. Specifically, some ARM Mali GPUs use the
ARM page table formats.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

drivers/iommu/arm-smmu-v3.c

@@ -18,6 +18,7 @@
 #include <linux/dma-iommu.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/iopoll.h>
 #include <linux/init.h>
@@ -32,8 +33,6 @@
 
 #include <linux/amba/bus.h>
 
-#include "io-pgtable.h"
-
 /* MMIO registers */
 #define ARM_SMMU_IDR0			0x0
 #define IDR0_ST_LVL			GENMASK(28, 27)

drivers/iommu/arm-smmu.c

@@ -39,6 +39,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/iopoll.h>
 #include <linux/init.h>
@@ -56,7 +57,6 @@
 #include <linux/amba/bus.h>
 #include <linux/fsl/mc.h>
 
-#include "io-pgtable.h"
 #include "arm-smmu-regs.h"
 
 #define ARM_MMU500_ACTLR_CPRE		(1 << 1)

drivers/iommu/io-pgtable-arm-v7s.c

@@ -35,6 +35,7 @@
 #include <linux/atomic.h>
 #include <linux/dma-mapping.h>
 #include <linux/gfp.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/kernel.h>
 #include <linux/kmemleak.h>
@@ -45,8 +46,6 @@
 
 #include <asm/barrier.h>
 
-#include "io-pgtable.h"
-
 /* Struct accessors */
 #define io_pgtable_to_data(x)						\
 	container_of((x), struct arm_v7s_io_pgtable, iop)

drivers/iommu/io-pgtable-arm.c

@@ -22,6 +22,7 @@
 
 #include <linux/atomic.h>
 #include <linux/bitops.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/kernel.h>
 #include <linux/sizes.h>
@@ -31,8 +32,6 @@
 
 #include <asm/barrier.h>
 
-#include "io-pgtable.h"
-
 #define ARM_LPAE_MAX_ADDR_BITS		52
 #define ARM_LPAE_S2_MAX_CONCAT_PAGES	16
 #define ARM_LPAE_MAX_LEVELS		4

drivers/iommu/io-pgtable.c

@@ -19,11 +19,10 @@
  */
 
 #include <linux/bug.h>
+#include <linux/io-pgtable.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include "io-pgtable.h"
-
 static const struct io_pgtable_init_fns *
 io_pgtable_init_table[IO_PGTABLE_NUM_FMTS] = {
 #ifdef CONFIG_IOMMU_IO_PGTABLE_LPAE
@@ -61,6 +60,7 @@ struct io_pgtable_ops *alloc_io_pgtable_ops(enum io_pgtable_fmt fmt,
 
 	return &iop->ops;
 }
+EXPORT_SYMBOL_GPL(alloc_io_pgtable_ops);
 
 /*
  * It is the IOMMU driver's responsibility to ensure that the page table
@@ -77,3 +77,4 @@ void free_io_pgtable_ops(struct io_pgtable_ops *ops)
 	io_pgtable_tlb_flush_all(iop);
 	io_pgtable_init_table[iop->fmt]->free(iop);
 }
+EXPORT_SYMBOL_GPL(free_io_pgtable_ops);

drivers/iommu/ipmmu-vmsa.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -35,8 +36,6 @@
 #define arm_iommu_detach_device(...)	do {} while (0)
 #endif
 
-#include "io-pgtable.h"
-
 #define IPMMU_CTX_MAX 8
 
 struct ipmmu_features {

drivers/iommu/msm_iommu.c

@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/io-pgtable.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -37,7 +38,6 @@
 
 #include "msm_iommu_hw-8xxx.h"
 #include "msm_iommu.h"
-#include "io-pgtable.h"
 
 #define MRC(reg, processor, op1, crn, crm, op2)				\
 __asm__ __volatile__ (							\

drivers/iommu/mtk_iommu.h

@@ -19,13 +19,12 @@
 #include <linux/component.h>
 #include <linux/device.h>
 #include <linux/io.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <soc/mediatek/smi.h>
 
-#include "io-pgtable.h"
-
 struct mtk_iommu_suspend_reg {
 	u32				standard_axi_mode;
 	u32				dcm_dis;

drivers/iommu/qcom_iommu.c

@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/io-pgtable.h>
 #include <linux/iommu.h>
 #include <linux/iopoll.h>
 #include <linux/kconfig.h>
@@ -42,7 +43,6 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include "io-pgtable.h"
 #include "arm-smmu-regs.h"
 
 #define SMMU_INTR_SEL_NS     0x2000