Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 b772d7ae 编写于 作者: A Arnd Bergmann 提交者： Linus Walleij
浏览文件
操作

gpio: remove ks8695 driver 

The platform is getting removed, so there are no remaining
users of this driver.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190809202749.742267-4-arnd@arndb.deSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 40b0bcd3
隐藏空白更改
内联 并排
Showing with 0 addition and 285 deletion
drivers/gpio/Makefile
浏览文件 @ b772d7ae
......@@ -67,7 +67,6 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
......
drivers/gpio/gpio-ks8695.c 已删除 100644 → 0
浏览文件 @ 40b0bcd3
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-ks8695/gpio.c
*
* Copyright (C) 2006 Andrew Victor
* Updated to GPIOLIB, Copyright 2008 Simtec Electronics
* Daniel Silverstone <dsilvers@simtec.co.uk>
*/
#include <linux/gpio/driver.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-ks8695.h>
/*
* Configure a GPIO line for either GPIO function, or its internal
* function (Interrupt, Timer, etc).
*/
static void ks8695_gpio_mode(unsigned int pin, short gpio)
{
unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
unsigned long x, flags;
if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */
return;
local_irq_save(flags);
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
if (gpio) /* GPIO: set bit to 0 */
x &= ~enable[pin];
else /* Internal function: set bit to 1 */
x |= enable[pin];
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
local_irq_restore(flags);
}
static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
/*
* Configure GPIO pin as external interrupt source.
*/
int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
{
unsigned long x, flags;
if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
return -EINVAL;
local_irq_save(flags);
/* set pin as input */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
x &= ~IOPM(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
local_irq_restore(flags);
/* Set IRQ triggering type */
irq_set_irq_type(gpio_irq[pin], type);
/* enable interrupt mode */
ks8695_gpio_mode(pin, 0);
return 0;
}
EXPORT_SYMBOL(ks8695_gpio_interrupt);
/* .... Generic GPIO interface .............................................. */
/*
* Configure the GPIO line as an input.
*/
static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
{
unsigned long x, flags;
if (pin > KS8695_GPIO_15)
return -EINVAL;
/* set pin to GPIO mode */
ks8695_gpio_mode(pin, 1);
local_irq_save(flags);
/* set pin as input */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
x &= ~IOPM(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
local_irq_restore(flags);
return 0;
}
/*
* Configure the GPIO line as an output, with default state.
*/
static int ks8695_gpio_direction_output(struct gpio_chip *gc,
unsigned int pin, int state)
{
unsigned long x, flags;
if (pin > KS8695_GPIO_15)
return -EINVAL;
/* set pin to GPIO mode */
ks8695_gpio_mode(pin, 1);
local_irq_save(flags);
/* set line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
if (state)
x |= IOPD(pin);
else
x &= ~IOPD(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
/* set pin as output */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
x |= IOPM(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
local_irq_restore(flags);
return 0;
}
/*
* Set the state of an output GPIO line.
*/
static void ks8695_gpio_set_value(struct gpio_chip *gc,
unsigned int pin, int state)
{
unsigned long x, flags;
if (pin > KS8695_GPIO_15)
return;
local_irq_save(flags);
/* set output line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
if (state)
x |= IOPD(pin);
else
x &= ~IOPD(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
local_irq_restore(flags);
}
/*
* Read the state of a GPIO line.
*/
static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
{
unsigned long x;
if (pin > KS8695_GPIO_15)
return -EINVAL;
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
return (x & IOPD(pin)) != 0;
}
/*
* Map GPIO line to IRQ number.
*/
static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
{
if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
return -EINVAL;
return gpio_irq[pin];
}
/* GPIOLIB interface */
static struct gpio_chip ks8695_gpio_chip = {
.label = "KS8695",
.direction_input = ks8695_gpio_direction_input,
.direction_output = ks8695_gpio_direction_output,
.get = ks8695_gpio_get_value,
.set = ks8695_gpio_set_value,
.to_irq = ks8695_gpio_to_irq,
.base = 0,
.ngpio = 16,
.can_sleep = false,
};
/* Register the GPIOs */
void ks8695_register_gpios(void)
{
if (gpiochip_add_data(&ks8695_gpio_chip, NULL))
printk(KERN_ERR "Unable to register core GPIOs\n");
}
/* .... Debug interface ..................................................... */
#ifdef CONFIG_DEBUG_FS
static int ks8695_gpio_show(struct seq_file *s, void *unused)
{
unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
unsigned long mode, ctrl, data;
int i;
mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
seq_printf(s, "%i:\t", i);
seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
if (i <= KS8695_GPIO_3) {
if (ctrl & enable[i]) {
seq_printf(s, "EXT%i ", i);
switch ((ctrl & intmask[i]) >> (4 * i)) {
case IOPC_TM_LOW:
seq_printf(s, "(Low)"); break;
case IOPC_TM_HIGH:
seq_printf(s, "(High)"); break;
case IOPC_TM_RISING:
seq_printf(s, "(Rising)"); break;
case IOPC_TM_FALLING:
seq_printf(s, "(Falling)"); break;
case IOPC_TM_EDGE:
seq_printf(s, "(Edges)"); break;
}
} else
seq_printf(s, "GPIO\t");
} else if (i <= KS8695_GPIO_5) {
if (ctrl & enable[i])
seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
else
seq_printf(s, "GPIO\t");
} else {
seq_printf(s, "GPIO\t");
}
seq_printf(s, "\t");
seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
}
return 0;
}
DEFINE_SHOW_ATTRIBUTE(ks8695_gpio);
static int __init ks8695_gpio_debugfs_init(void)
{
/* /sys/kernel/debug/ks8695_gpio */
debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL,
&ks8695_gpio_fops);
return 0;
}
postcore_initcall(ks8695_gpio_debugfs_init);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或