drivers/video: fsl-diu-fb: move some definitions out of the header file

Move several macros and structures from the Freescale DIU driver's header
file into the source file, because they're only used by that file.  Also
delete a few unused macros.

The diu and diu_ad structures cannot be moved because they're being used
by the MPC5121 platform file.  A future patch eliminate the need for
the platform file to access these structs, so they'll be moved also.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

drivers/video/fsl-diu-fb.c

@@ -30,11 +30,50 @@
 #include <linux/clk.h>
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
+#include <linux/spinlock.h>
 
 #include <sysdev/fsl_soc.h>
 #include <linux/fsl-diu-fb.h>
 #include "edid.h"
 
+#define FSL_AOI_NUM	6	/* 5 AOIs and one dummy AOI */
+				/* 1 for plane 0, 2 for plane 1&2 each */
+
+/* HW cursor parameters */
+#define MAX_CURS		32
+
+/* INT_STATUS/INT_MASK field descriptions */
+#define INT_VSYNC	0x01	/* Vsync interrupt  */
+#define INT_VSYNC_WB	0x02	/* Vsync interrupt for write back operation */
+#define INT_UNDRUN	0x04	/* Under run exception interrupt */
+#define INT_PARERR	0x08	/* Display parameters error interrupt */
+#define INT_LS_BF_VS	0x10	/* Lines before vsync. interrupt */
+
+/* Panels'operation modes */
+#define MFB_TYPE_OUTPUT	0	/* Panel output to display */
+#define MFB_TYPE_OFF	1	/* Panel off */
+#define MFB_TYPE_WB	2	/* Panel written back to memory */
+#define MFB_TYPE_TEST	3	/* Panel generate color bar */
+
+struct diu_hw {
+	struct diu __iomem *diu_reg;
+	spinlock_t reg_lock;
+	unsigned int mode;		/* DIU operation mode */
+};
+
+struct diu_addr {
+	void *vaddr;		/* Virtual address */
+	dma_addr_t paddr;	/* Physical address */
+	__u32 offset;
+};
+
+struct diu_pool {
+	struct diu_addr ad;
+	struct diu_addr gamma;
+	struct diu_addr pallete;
+	struct diu_addr cursor;
+};
+
 /*
  * List of supported video modes
  *

include/linux/fsl-diu-fb.h

@@ -56,7 +56,6 @@ struct aoi_display_offset {
 #define MFB_GET_PIXFMT_OLD	0x40014d08
 
 #ifdef __KERNEL__
-#include <linux/spinlock.h>
 
 /*
  * These are the fields of area descriptor(in DDR memory) for every plane
@@ -154,39 +153,6 @@ struct diu {
 	__be32 plut;
 } __attribute__ ((packed));
 
-struct diu_hw {
-	struct diu *diu_reg;
-	spinlock_t reg_lock;
-
-	__u32 mode;		/* DIU operation mode */
-};
-
-struct diu_addr {
-	void *vaddr;		/* Virtual address */
-	dma_addr_t paddr;	/* Physical address */
-	__u32 	   offset;
-};
-
-struct diu_pool {
-	struct diu_addr ad;
-	struct diu_addr gamma;
-	struct diu_addr pallete;
-	struct diu_addr cursor;
-};
-
-#define FSL_DIU_BASE_OFFSET	0x2C000	/* Offset of DIU */
-#define INT_LCDC		64	/* DIU interrupt number */
-
-#define FSL_AOI_NUM	6	/* 5 AOIs and one dummy AOI */
-				/* 1 for plane 0, 2 for plane 1&2 each */
-
-/* Minimum X and Y resolutions */
-#define MIN_XRES	64
-#define MIN_YRES	64
-
-/* HW cursor parameters */
-#define MAX_CURS		32
-
 /* Modes of operation of DIU */
 #define MFB_MODE0	0	/* DIU off */
 #define MFB_MODE1	1	/* All three planes output to display */
@@ -194,18 +160,5 @@ struct diu_pool {
 #define MFB_MODE3	3	/* All three planes written back to memory */
 #define MFB_MODE4	4	/* Color bar generation */
 
-/* INT_STATUS/INT_MASK field descriptions */
-#define INT_VSYNC	0x01	/* Vsync interrupt  */
-#define INT_VSYNC_WB	0x02	/* Vsync interrupt for write back operation */
-#define INT_UNDRUN	0x04	/* Under run exception interrupt */
-#define INT_PARERR	0x08	/* Display parameters error interrupt */
-#define INT_LS_BF_VS	0x10	/* Lines before vsync. interrupt */
-
-/* Panels'operation modes */
-#define MFB_TYPE_OUTPUT	0	/* Panel output to display */
-#define MFB_TYPE_OFF	1	/* Panel off */
-#define MFB_TYPE_WB	2	/* Panel written back to memory */
-#define MFB_TYPE_TEST	3	/* Panel generate color bar */
-
 #endif /* __KERNEL__ */
 #endif /* __FSL_DIU_FB_H__ */