提交 b6fef0ef 编写于 作者: J Jesse Barnes 提交者: Daniel Vetter

drm/i915/skl: add turbo support

Per latest PM programming guide.

v2: the wrong flavour of the function updating the ring frequency was
    called, leading to dead locks (Tvrtko)

v3: Add GEN6_RP_MEDIA_IS_GFX to RP_CONTROL (Imre, done by Damien)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: Fixup conflicts with Mika's forcewake refactor.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 1407121a
......@@ -4024,7 +4024,35 @@ static void gen6_init_rps_frequencies(struct drm_device *dev)
}
}
/* See the Gen9_GT_PM_Programming_Guide doc for the below */
static void gen9_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
I915_WRITE(GEN6_RPNSWREQ, 0xc800000);
I915_WRITE(GEN6_RC_VIDEO_FREQ, 0xc800000);
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 0xf4240);
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, 0x12060000);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 0xe808);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 0x3bd08);
I915_WRITE(GEN6_RP_UP_EI, 0x101d0);
I915_WRITE(GEN6_RP_DOWN_EI, 0x55730);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 0xa);
I915_WRITE(GEN6_PMINTRMSK, 0x6);
I915_WRITE(GEN6_RP_CONTROL, GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_MODE | GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE | GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
gen6_enable_rps_interrupts(dev);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen9_enable_rc6(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
......@@ -5574,7 +5602,9 @@ static void intel_gen6_powersave_work(struct work_struct *work)
} else if (IS_VALLEYVIEW(dev)) {
valleyview_enable_rps(dev);
} else if (INTEL_INFO(dev)->gen >= 9) {
gen9_enable_rc6(dev);
gen9_enable_rps(dev);
__gen6_update_ring_freq(dev);
} else if (IS_BROADWELL(dev)) {
gen8_enable_rps(dev);
__gen6_update_ring_freq(dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册