提交 b6f9e595 编写于 作者: K Kumar Gala

powerpc/fsl-booke: Add p3041 DS board support

The P3041DS is in the same family of boards as the P4080DS and thus
shares the corenet_ds code.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 4267ea72
......@@ -153,6 +153,17 @@ config SBC8560
help
This option enables support for the Wind River SBC8560 board
config P3041_DS
bool "Freescale P3041 DS"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select MPC8xxx_GPIO
select HAS_RAPIDIO
help
This option enables support for the P3041 DS board
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
......
......@@ -11,6 +11,7 @@ obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
......
/*
* P3041 DS Setup
*
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
*
* Copyright 2009-2010 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/phy.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "corenet_ds.h"
/*
* Called very early, device-tree isn't unflattened
*/
static int __init p3041_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P3041DS");
}
define_machine(p3041_ds) {
.name = "P3041 DS",
.probe = p3041_ds_probe,
.setup_arch = corenet_ds_setup_arch,
.init_IRQ = corenet_ds_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_coreint_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
machine_device_initcall(p3041_ds, corenet_ds_publish_devices);
#ifdef CONFIG_SWIOTLB
machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册