staging: ti dspbridge: deh: remove err_info

We only use it to pass the MMU fault address.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/tidspbridge/core/_deh.h

@@ -26,7 +26,7 @@
 struct deh_mgr {
 	struct bridge_dev_context *hbridge_context;	/* Bridge context. */
 	struct ntfy_object *ntfy_obj;	/* NTFY object */
-	struct dsp_errorinfo err_info;	/* DSP exception info. */
+	u32 fault_addr;
 
 	/* MMU Fault DPC */
 	struct tasklet_struct dpc_tasklet;

drivers/staging/tidspbridge/core/mmu_fault.c

@@ -40,8 +40,6 @@
 #include "_tiomap.h"
 #include "mmu_fault.h"
 
-u32 fault_addr;
-
 /*
  *  ======== mmu_fault_dpc ========
  *      Deferred procedure call to handle DSP MMU fault.
@@ -78,9 +76,9 @@ irqreturn_t mmu_fault_isr(int irq, IN void *pRefData)
 
 	hw_mmu_event_status(resources->dw_dmmu_base, &dmmu_event_mask);
 	if (dmmu_event_mask == HW_MMU_TRANSLATION_FAULT) {
-		hw_mmu_fault_addr_read(resources->dw_dmmu_base, &fault_addr);
+		hw_mmu_fault_addr_read(resources->dw_dmmu_base, &deh_mgr_obj->fault_addr);
 		dev_info(bridge, "%s: status=0x%x, fault_addr=0x%x\n", __func__,
-				dmmu_event_mask, fault_addr);
+				dmmu_event_mask, deh_mgr_obj->fault_addr);
 		/*
 		 * Schedule a DPC directly. In the future, it may be
 		 * necessary to check if DSP MMU fault is intended for
@@ -88,11 +86,6 @@ irqreturn_t mmu_fault_isr(int irq, IN void *pRefData)
 		 */
 		tasklet_schedule(&deh_mgr_obj->dpc_tasklet);
 
-		/* Reset err_info structure before use. */
-		deh_mgr_obj->err_info.dw_err_mask = DSP_MMUFAULT;
-		deh_mgr_obj->err_info.dw_val1 = fault_addr >> 16;
-		deh_mgr_obj->err_info.dw_val2 = fault_addr & 0xFFFF;
-		deh_mgr_obj->err_info.dw_val3 = 0L;
 		/* Disable the MMU events, else once we clear it will
 		 * start to raise INTs again */
 		hw_mmu_event_disable(resources->dw_dmmu_base,

drivers/staging/tidspbridge/core/mmu_fault.h

@@ -19,8 +19,6 @@
 #ifndef MMU_FAULT_
 #define MMU_FAULT_
 
-extern u32 fault_addr;
-
 /*
  *  ======== mmu_fault_dpc ========
  *      Deferred procedure call to handle DSP MMU fault.

drivers/staging/tidspbridge/core/ue_deh.c

@@ -84,10 +84,6 @@ int bridge_deh_create(struct deh_mgr **ret_deh_mgr,
 
 	/* Fill in context structure */
 	deh_mgr->hbridge_context = hbridge_context;
-	deh_mgr->err_info.dw_err_mask = 0L;
-	deh_mgr->err_info.dw_val1 = 0L;
-	deh_mgr->err_info.dw_val2 = 0L;
-	deh_mgr->err_info.dw_val3 = 0L;
 
 	/* Install ISR function for DSP MMU fault */
 	status = request_irq(INT_DSP_MMU_IRQ, mmu_fault_isr, 0,
@@ -140,7 +136,8 @@ int bridge_deh_register_notify(struct deh_mgr *deh_mgr, u32 event_mask,
 		return ntfy_unregister(deh_mgr->ntfy_obj, hnotification);
 }
 
-static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
+static void mmu_fault_print_stack(struct bridge_dev_context *dev_context,
+		u32 fault_addr)
 {
 	struct cfg_hostres *resources;
 	struct hw_mmu_map_attrs_t map_attrs = {
@@ -192,50 +189,29 @@ void bridge_deh_notify(struct deh_mgr *deh_mgr, u32 ulEventMask, u32 dwErrInfo)
 
 	switch (ulEventMask) {
 	case DSP_SYSERROR:
-		/* reset err_info structure before use */
-		deh_mgr->err_info.dw_err_mask = DSP_SYSERROR;
-		deh_mgr->err_info.dw_val1 = 0L;
-		deh_mgr->err_info.dw_val2 = 0L;
-		deh_mgr->err_info.dw_val3 = 0L;
-		deh_mgr->err_info.dw_val1 = dwErrInfo;
 		dev_err(bridge, "%s: %s, err_info = 0x%x\n",
 				__func__, "DSP_SYSERROR", dwErrInfo);
 		dump_dl_modules(dev_context);
 		dump_dsp_stack(dev_context);
 		break;
 	case DSP_MMUFAULT:
-		/* MMU fault routine should have set err info structure. */
-		deh_mgr->err_info.dw_err_mask = DSP_MMUFAULT;
 		dev_err(bridge, "%s: %s, err_info = 0x%x\n",
 				__func__, "DSP_MMUFAULT", dwErrInfo);
-		dev_info(bridge, "%s: %s, high=0x%x, low=0x%x, "
-			"fault=0x%x\n", __func__, "DSP_MMUFAULT",
-			(unsigned int) deh_mgr->err_info.dw_val1,
-			(unsigned int) deh_mgr->err_info.dw_val2,
-			(unsigned int) fault_addr);
+		dev_info(bridge, "%s: %s, fault=0x%x\n", __func__, "DSP_MMUFAULT",
+				deh_mgr->fault_addr);
 
 		print_dsp_trace_buffer(dev_context);
 		dump_dl_modules(dev_context);
 
-		mmu_fault_print_stack(dev_context);
+		mmu_fault_print_stack(dev_context, deh_mgr->fault_addr);
 		break;
 #ifdef CONFIG_BRIDGE_NTFY_PWRERR
 	case DSP_PWRERROR:
-		/* reset err_info structure before use */
-		deh_mgr->err_info.dw_err_mask = DSP_PWRERROR;
-		deh_mgr->err_info.dw_val1 = 0L;
-		deh_mgr->err_info.dw_val2 = 0L;
-		deh_mgr->err_info.dw_val3 = 0L;
-		deh_mgr->err_info.dw_val1 = dwErrInfo;
 		dev_err(bridge, "%s: %s, err_info = 0x%x\n",
 				__func__, "DSP_PWRERROR", dwErrInfo);
 		break;
 #endif /* CONFIG_BRIDGE_NTFY_PWRERR */
 	case DSP_WDTOVERFLOW:
-		deh_mgr->err_info.dw_err_mask = DSP_WDTOVERFLOW;
-		deh_mgr->err_info.dw_val1 = 0L;
-		deh_mgr->err_info.dw_val2 = 0L;
-		deh_mgr->err_info.dw_val3 = 0L;
 		dev_err(bridge, "%s: DSP_WDTOVERFLOW\n", __func__);
 		break;
 	default:

drivers/staging/tidspbridge/include/dspbridge/dbdefs.h

@@ -428,7 +428,6 @@ struct dsp_errorinfo {
 struct dsp_processorstate {
 	u32 cb_struct;
 	enum dsp_procstate proc_state;
-	struct dsp_errorinfo err_info;
 };
 
 /*