提交 b650352d 编写于 作者: C Chris Ball

mmc: sdhci-pxa: Add device tree support

Tested on an OLPC XO-1.75.  (MMP2, sdhci-pxav3, CONFIG_MACH_MMP2_DT=y)
Signed-off-by: NChris Ball <cjb@laptop.org>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
上级 ed3efc1c
* Marvell sdhci-pxa v2/v3 controller
This file documents differences between the core properties in mmc.txt
and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
Required properties:
- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc".
Optional properties:
- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
Example:
sdhci@d4280800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xd4280800 0x800>;
bus-width = <8>;
interrupts = <27>;
non-removable;
mrvl,clk-delay-cycles = <31>;
};
......@@ -28,6 +28,9 @@
#include <linux/mmc/host.h>
#include <linux/platform_data/pxa_sdhci.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
......@@ -121,6 +124,48 @@ static struct sdhci_ops pxav2_sdhci_ops = {
.platform_8bit_width = pxav2_mmc_set_width,
};
#ifdef CONFIG_OF
static const struct of_device_id sdhci_pxav2_of_match[] = {
{
.compatible = "mrvl,pxav2-mmc",
},
{},
};
MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match);
static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
{
struct sdhci_pxa_platdata *pdata;
struct device_node *np = dev->of_node;
u32 bus_width;
u32 clk_delay_cycles;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
if (of_find_property(np, "non-removable", NULL))
pdata->flags |= PXA_FLAG_CARD_PERMANENT;
of_property_read_u32(np, "bus-width", &bus_width);
if (bus_width == 8)
pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
if (clk_delay_cycles > 0) {
pdata->clk_delay_sel = 1;
pdata->clk_delay_cycles = clk_delay_cycles;
}
return pdata;
}
#else
static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
{
return NULL;
}
#endif
static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
......@@ -128,6 +173,8 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
int ret;
struct clk *clk;
......@@ -156,6 +203,10 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev);
if (match) {
pdata = pxav2_get_mmc_pdata(dev);
}
if (pdata) {
if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
/* on-chip device */
......@@ -218,6 +269,9 @@ static struct platform_driver sdhci_pxav2_driver = {
.driver = {
.name = "sdhci-pxav2",
.owner = THIS_MODULE,
#ifdef CONFIG_OF
.of_match_table = sdhci_pxav2_of_match,
#endif
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_pxav2_probe,
......
......@@ -28,6 +28,9 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
......@@ -164,6 +167,46 @@ static struct sdhci_ops pxav3_sdhci_ops = {
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
};
#ifdef CONFIG_OF
static const struct of_device_id sdhci_pxav3_of_match[] = {
{
.compatible = "mrvl,pxav3-mmc",
},
{},
};
MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
{
struct sdhci_pxa_platdata *pdata;
struct device_node *np = dev->of_node;
u32 bus_width;
u32 clk_delay_cycles;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
if (of_find_property(np, "non-removable", NULL))
pdata->flags |= PXA_FLAG_CARD_PERMANENT;
of_property_read_u32(np, "bus-width", &bus_width);
if (bus_width == 8)
pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
if (clk_delay_cycles > 0)
pdata->clk_delay_cycles = clk_delay_cycles;
return pdata;
}
#else
static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
{
return NULL;
}
#endif
static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
......@@ -171,6 +214,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
int ret;
struct clk *clk;
......@@ -202,6 +247,10 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
if (match)
pdata = pxav3_get_mmc_pdata(dev);
if (pdata) {
if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
/* on-chip device */
......@@ -263,6 +312,9 @@ static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
static struct platform_driver sdhci_pxav3_driver = {
.driver = {
.name = "sdhci-pxav3",
#ifdef CONFIG_OF
.of_match_table = sdhci_pxav3_of_match,
#endif
.owner = THIS_MODULE,
.pm = SDHCI_PLTFM_PMOPS,
},
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册