提交 b60e1157 编写于 作者: C Carlo Caione

ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b

Signed-off-by: NCarlo Caione <carlo@endlessm.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NKevin Hilman <khilman@baylibre.com>
上级 f55532a0
......@@ -91,8 +91,8 @@
clock-frequency = <141666666>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -108,29 +108,6 @@
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
......@@ -157,4 +134,34 @@
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
};
}; /* end of / */
......@@ -155,8 +155,8 @@
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8b-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -171,6 +171,14 @@
gpio-controller;
#gpio-cells = <2>;
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8b-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册