提交 b6080e12 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Add coalesce parameters for msix vectors

This patch adds code to tune the coalescing parameters for the other
msix vectors.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 fed97810
......@@ -6876,24 +6876,63 @@ static void tg3_set_bdinfo(struct tg3 *tp, u32 bdinfo_addr,
static void __tg3_set_rx_mode(struct net_device *);
static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
{
tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq);
int i;
if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
} else {
tw32(HOSTCC_TXCOL_TICKS, 0);
tw32(HOSTCC_TXMAX_FRAMES, 0);
tw32(HOSTCC_TXCOAL_MAXF_INT, 0);
tw32(HOSTCC_RXCOL_TICKS, 0);
tw32(HOSTCC_RXMAX_FRAMES, 0);
tw32(HOSTCC_RXCOAL_MAXF_INT, 0);
}
tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
u32 val = ec->stats_block_coalesce_usecs;
tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq);
if (!netif_carrier_ok(tp->dev))
val = 0;
tw32(HOSTCC_STAT_COAL_TICKS, val);
}
for (i = 0; i < tp->irq_cnt - 1; i++) {
u32 reg;
reg = HOSTCC_RXCOL_TICKS_VEC1 + i * 0x18;
tw32(reg, ec->rx_coalesce_usecs);
reg = HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18;
tw32(reg, ec->tx_coalesce_usecs);
reg = HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18;
tw32(reg, ec->rx_max_coalesced_frames);
reg = HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18;
tw32(reg, ec->tx_max_coalesced_frames);
reg = HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18;
tw32(reg, ec->rx_max_coalesced_frames_irq);
reg = HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18;
tw32(reg, ec->tx_max_coalesced_frames_irq);
}
for (; i < tp->irq_max - 1; i++) {
tw32(HOSTCC_RXCOL_TICKS_VEC1 + i * 0x18, 0);
tw32(HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18, 0);
tw32(HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18, 0);
tw32(HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18, 0);
tw32(HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
tw32(HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
}
}
/* tp->lock is held. */
......
......@@ -1119,7 +1119,15 @@
#define HOSTCC_SND_CON_IDX_14 0x00003cf8
#define HOSTCC_SND_CON_IDX_15 0x00003cfc
#define HOSTCC_STATBLCK_RING1 0x00003d00
/* 0x3d04 --> 0x4000 unused */
/* 0x3d00 --> 0x3d80 unused */
#define HOSTCC_RXCOL_TICKS_VEC1 0x00003d80
#define HOSTCC_TXCOL_TICKS_VEC1 0x00003d84
#define HOSTCC_RXMAX_FRAMES_VEC1 0x00003d88
#define HOSTCC_TXMAX_FRAMES_VEC1 0x00003d8c
#define HOSTCC_RXCOAL_MAXF_INT_VEC1 0x00003d90
#define HOSTCC_TXCOAL_MAXF_INT_VEC1 0x00003d94
/* 0x3d98 --> 0x4000 unused */
/* Memory arbiter control registers */
#define MEMARB_MODE 0x00004000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册