提交 b5bc66b7 编写于 作者: A Aneesh Kumar K.V 提交者: Linus Torvalds

mm: update mmu_gather range correctly

We use __tlb_adjust_range to update range convered by mmu_gather struct.
We later use the 'start' and 'end' to do a mmu_notifier_invalidate_range
in tlb_flush_mmu_tlbonly().  Update the 'end' correctly in
__tlb_adjust_range so that we call mmu_notifier_invalidate_range with
the correct range values.

Wrt tlbflush, this should not have any impact, because a flush with
correct start address will flush tlb mapping for the range.

Also add comment w.r.t updating the range when we free pagetable pages.
For now we don't support a range based page table cache flush.

Link: http://lkml.kernel.org/r/20161026084839.27299-3-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 c0f2e176
...@@ -125,10 +125,11 @@ extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, ...@@ -125,10 +125,11 @@ extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
int page_size); int page_size);
static inline void __tlb_adjust_range(struct mmu_gather *tlb, static inline void __tlb_adjust_range(struct mmu_gather *tlb,
unsigned long address) unsigned long address,
unsigned int range_size)
{ {
tlb->start = min(tlb->start, address); tlb->start = min(tlb->start, address);
tlb->end = max(tlb->end, address + PAGE_SIZE); tlb->end = max(tlb->end, address + range_size);
/* /*
* Track the last address with which we adjusted the range. This * Track the last address with which we adjusted the range. This
* will be used later to adjust again after a mmu_flush due to * will be used later to adjust again after a mmu_flush due to
...@@ -153,7 +154,7 @@ static inline void tlb_remove_page_size(struct mmu_gather *tlb, ...@@ -153,7 +154,7 @@ static inline void tlb_remove_page_size(struct mmu_gather *tlb,
if (__tlb_remove_page_size(tlb, page, page_size)) { if (__tlb_remove_page_size(tlb, page, page_size)) {
tlb_flush_mmu(tlb); tlb_flush_mmu(tlb);
tlb->page_size = page_size; tlb->page_size = page_size;
__tlb_adjust_range(tlb, tlb->addr); __tlb_adjust_range(tlb, tlb->addr, page_size);
__tlb_remove_page_size(tlb, page, page_size); __tlb_remove_page_size(tlb, page, page_size);
} }
} }
...@@ -177,7 +178,7 @@ static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *pa ...@@ -177,7 +178,7 @@ static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *pa
/* active->nr should be zero when we call this */ /* active->nr should be zero when we call this */
VM_BUG_ON_PAGE(tlb->active->nr, page); VM_BUG_ON_PAGE(tlb->active->nr, page);
tlb->page_size = PAGE_SIZE; tlb->page_size = PAGE_SIZE;
__tlb_adjust_range(tlb, tlb->addr); __tlb_adjust_range(tlb, tlb->addr, PAGE_SIZE);
return __tlb_remove_page(tlb, page); return __tlb_remove_page(tlb, page);
} }
...@@ -215,7 +216,7 @@ static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *pa ...@@ -215,7 +216,7 @@ static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *pa
*/ */
#define tlb_remove_tlb_entry(tlb, ptep, address) \ #define tlb_remove_tlb_entry(tlb, ptep, address) \
do { \ do { \
__tlb_adjust_range(tlb, address); \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \
__tlb_remove_tlb_entry(tlb, ptep, address); \ __tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0) } while (0)
...@@ -227,29 +228,47 @@ static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *pa ...@@ -227,29 +228,47 @@ static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *pa
#define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0) #define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0)
#endif #endif
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \ #define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \
do { \ do { \
__tlb_adjust_range(tlb, address); \ __tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE); \
__tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \ __tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \
} while (0) } while (0)
/*
* For things like page tables caches (ie caching addresses "inside" the
* page tables, like x86 does), for legacy reasons, flushing an
* individual page had better flush the page table caches behind it. This
* is definitely how x86 works, for example. And if you have an
* architected non-legacy page table cache (which I'm not aware of
* anybody actually doing), you're going to have some architecturally
* explicit flushing for that, likely *separate* from a regular TLB entry
* flush, and thus you'd need more than just some range expansion..
*
* So if we ever find an architecture
* that would want something that odd, I think it is up to that
* architecture to do its own odd thing, not cause pain for others
* http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com
*
* For now w.r.t page table cache, mark the range_size as PAGE_SIZE
*/
#define pte_free_tlb(tlb, ptep, address) \ #define pte_free_tlb(tlb, ptep, address) \
do { \ do { \
__tlb_adjust_range(tlb, address); \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \
__pte_free_tlb(tlb, ptep, address); \ __pte_free_tlb(tlb, ptep, address); \
} while (0) } while (0)
#ifndef __ARCH_HAS_4LEVEL_HACK #ifndef __ARCH_HAS_4LEVEL_HACK
#define pud_free_tlb(tlb, pudp, address) \ #define pud_free_tlb(tlb, pudp, address) \
do { \ do { \
__tlb_adjust_range(tlb, address); \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \
__pud_free_tlb(tlb, pudp, address); \ __pud_free_tlb(tlb, pudp, address); \
} while (0) } while (0)
#endif #endif
#define pmd_free_tlb(tlb, pmdp, address) \ #define pmd_free_tlb(tlb, pmdp, address) \
do { \ do { \
__tlb_adjust_range(tlb, address); \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \
__pmd_free_tlb(tlb, pmdp, address); \ __pmd_free_tlb(tlb, pmdp, address); \
} while (0) } while (0)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册