net/mlx5e: Fix SWP offsets when vlan inserted by driver

In case WQE includes inline header the vlan is inserted by driver even
if vlan offload is set. On geneve over vlan interface where software
parser is used the SWP offsets should be updated according to the added
vlan.

Fixes: e3cfc7e6 ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h

@@ -371,6 +371,15 @@ struct mlx5e_swp_spec {
 	u8 tun_l4_proto;
 };
 
+static inline void mlx5e_eseg_swp_offsets_add_vlan(struct mlx5_wqe_eth_seg *eseg)
+{
+	/* SWP offsets are in 2-bytes words */
+	eseg->swp_outer_l3_offset += VLAN_HLEN / 2;
+	eseg->swp_outer_l4_offset += VLAN_HLEN / 2;
+	eseg->swp_inner_l3_offset += VLAN_HLEN / 2;
+	eseg->swp_inner_l4_offset += VLAN_HLEN / 2;
+}
+
 static inline void
 mlx5e_set_eseg_swp(struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg,
 		   struct mlx5e_swp_spec *swp_spec)

drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h

@@ -51,7 +51,7 @@ static inline bool mlx5_geneve_tx_allowed(struct mlx5_core_dev *mdev)
 }
 
 static inline void
-mlx5e_tx_tunnel_accel(struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg)
+mlx5e_tx_tunnel_accel(struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg, u16 ihs)
 {
 	struct mlx5e_swp_spec swp_spec = {};
 	unsigned int offset = 0;
@@ -85,6 +85,8 @@ mlx5e_tx_tunnel_accel(struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg)
 	}
 
 	mlx5e_set_eseg_swp(skb, eseg, &swp_spec);
+	if (skb_vlan_tag_present(skb) &&  ihs)
+		mlx5e_eseg_swp_offsets_add_vlan(eseg);
 }
 
 #else
@@ -163,7 +165,7 @@ static inline unsigned int mlx5e_accel_tx_ids_len(struct mlx5e_txqsq *sq,
 
 static inline bool mlx5e_accel_tx_eseg(struct mlx5e_priv *priv,
 				       struct sk_buff *skb,
-				       struct mlx5_wqe_eth_seg *eseg)
+				       struct mlx5_wqe_eth_seg *eseg, u16 ihs)
 {
 #ifdef CONFIG_MLX5_EN_IPSEC
 	if (xfrm_offload(skb))
@@ -172,7 +174,7 @@ static inline bool mlx5e_accel_tx_eseg(struct mlx5e_priv *priv,
 
 #if IS_ENABLED(CONFIG_GENEVE)
 	if (skb->encapsulation)
-		mlx5e_tx_tunnel_accel(skb, eseg);
+		mlx5e_tx_tunnel_accel(skb, eseg, ihs);
 #endif
 
 	return true;

drivers/net/ethernet/mellanox/mlx5/core/en_tx.c

@@ -682,9 +682,9 @@ void mlx5e_tx_mpwqe_ensure_complete(struct mlx5e_txqsq *sq)
 
 static bool mlx5e_txwqe_build_eseg(struct mlx5e_priv *priv, struct mlx5e_txqsq *sq,
 				   struct sk_buff *skb, struct mlx5e_accel_tx_state *accel,
-				   struct mlx5_wqe_eth_seg *eseg)
+				   struct mlx5_wqe_eth_seg *eseg, u16 ihs)
 {
-	if (unlikely(!mlx5e_accel_tx_eseg(priv, skb, eseg)))
+	if (unlikely(!mlx5e_accel_tx_eseg(priv, skb, eseg, ihs)))
 		return false;
 
 	mlx5e_txwqe_build_eseg_csum(sq, skb, accel, eseg);
@@ -714,7 +714,8 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (mlx5e_tx_skb_supports_mpwqe(skb, &attr)) {
 			struct mlx5_wqe_eth_seg eseg = {};
 
-			if (unlikely(!mlx5e_txwqe_build_eseg(priv, sq, skb, &accel, &eseg)))
+			if (unlikely(!mlx5e_txwqe_build_eseg(priv, sq, skb, &accel, &eseg,
+							     attr.ihs)))
 				return NETDEV_TX_OK;
 
 			mlx5e_sq_xmit_mpwqe(sq, skb, &eseg, netdev_xmit_more());
@@ -731,7 +732,7 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* May update the WQE, but may not post other WQEs. */
 	mlx5e_accel_tx_finish(sq, wqe, &accel,
 			      (struct mlx5_wqe_inline_seg *)(wqe->data + wqe_attr.ds_cnt_inl));
-	if (unlikely(!mlx5e_txwqe_build_eseg(priv, sq, skb, &accel, &wqe->eth)))
+	if (unlikely(!mlx5e_txwqe_build_eseg(priv, sq, skb, &accel, &wqe->eth, attr.ihs)))
 		return NETDEV_TX_OK;
 
 	mlx5e_sq_xmit_wqe(sq, skb, &attr, &wqe_attr, wqe, pi, netdev_xmit_more());