mfd: intel_soc_pmic: Fix a mess with compilation units

Crystal Cove and Whiskey Cove are two different PMICs which are
installed on Intel Atom SoC based platforms.

Moreover there are two independent drivers that by some reason were
supposed (*) to get into one kernel module.

Fix the mess by clarifying Kconfig option for Crystal Cove and split
Whiskey Cove out of it.

(*) It looks like the configuration was never tested with
    INTEL_SOC_PMIC=n. The line in Makefile is actually wrong.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI)
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

drivers/acpi/Kconfig

@@ -512,7 +512,7 @@ config XPOWER_PMIC_OPREGION
 
 config BXT_WC_PMIC_OPREGION
 	bool "ACPI operation region support for BXT WhiskeyCove PMIC"
-	depends on INTEL_SOC_PMIC
+	depends on INTEL_SOC_PMIC_BXTWC
 	help
 	  This config adds ACPI operation region support for BXT WhiskeyCove PMIC.
 

drivers/gpio/Kconfig

@@ -1054,7 +1054,7 @@ config GPIO_UCB1400
 
 config GPIO_WHISKEY_COVE
 	tristate "GPIO support for Whiskey Cove PMIC"
-	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC
 	select GPIOLIB_IRQCHIP
 	help
 	  Support for GPIO pins on Whiskey Cove PMIC.

drivers/mfd/Kconfig

@@ -447,18 +447,29 @@ config LPC_SCH
 	  System Management Bus and General Purpose I/O.
 
 config INTEL_SOC_PMIC
-	bool "Support for Intel Atom SoC PMIC"
+	bool "Support for Crystal Cove PMIC"
 	depends on GPIOLIB
 	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  Select this option to enable support for the PMIC device
+	  Select this option to enable support for Crystal Cove PMIC
 	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
 	  thermal, charger and related power management functions
 	  on these systems.
 
+config INTEL_SOC_PMIC_BXTWC
+	tristate "Support for Intel Broxton Whiskey Cove PMIC"
+	depends on INTEL_PMC_IPC
+	select MFD_CORE
+	select REGMAP_IRQ
+	help
+	  Select this option to enable support for Whiskey Cove PMIC
+	  on Intel Broxton systems. The PMIC provides ADC, GPIO,
+	  thermal, charger and related power management functions
+	  on these systems.
+
 config MFD_INTEL_LPSS
 	tristate
 	select COMMON_CLK

drivers/mfd/Makefile

@@ -212,8 +212,8 @@ obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
-intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
+obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o

drivers/platform/x86/Kconfig

@@ -1011,7 +1011,7 @@ config INTEL_PMC_IPC
 config INTEL_BXTWC_PMIC_TMU
 	tristate "Intel BXT Whiskey Cove TMU Driver"
 	depends on REGMAP
-	depends on INTEL_SOC_PMIC && INTEL_PMC_IPC
+	depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC
 	---help---
 	  Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
 	  This driver enables the alarm wakeup functionality in the TMU unit

drivers/thermal/Kconfig

@@ -365,7 +365,7 @@ endmenu
 
 config INTEL_BXT_PMIC_THERMAL
 	tristate "Intel Broxton PMIC thermal driver"
-	depends on X86 && INTEL_SOC_PMIC && REGMAP
+	depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
 	help
 	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
 	  system temperature measurements and alerts.