mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs

When XDP is active in mlx4, mlx4 is using one page/pkt.
At the same time (i.e. when XDP is active), it is currently
limiting MTU to be FRAG_SZ0 - ETH_HLEN - (2 * VLAN_HLEN)
which is 1514 in x86.  AFAICT, we can at least raise the MTU
limit up to PAGE_SIZE - ETH_HLEN - (2 * VLAN_HLEN) which this
patch is doing.  It will be useful in the next patch which
allows XDP program to extend the packet by adding new header(s).

Note: In the earlier XDP patches, there is already existing guard
to ensure the page/pkt scheme only applies when XDP is active
in mlx4.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -51,6 +51,8 @@
 #include "mlx4_en.h"
 #include "en_port.h"
 
+#define MLX4_EN_MAX_XDP_MTU ((int)(PAGE_SIZE - ETH_HLEN - (2 * VLAN_HLEN)))
+
 int mlx4_en_setup_tc(struct net_device *dev, u8 up)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
@@ -2249,6 +2251,19 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
 	free_netdev(dev);
 }
 
+static bool mlx4_en_check_xdp_mtu(struct net_device *dev, int mtu)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	if (mtu > MLX4_EN_MAX_XDP_MTU) {
+		en_err(priv, "mtu:%d > max:%d when XDP prog is attached\n",
+		       mtu, MLX4_EN_MAX_XDP_MTU);
+		return false;
+	}
+
+	return true;
+}
+
 static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
@@ -2258,11 +2273,10 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
 	en_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n",
 		 dev->mtu, new_mtu);
 
-	if (priv->tx_ring_num[TX_XDP] && MLX4_EN_EFF_MTU(new_mtu) > FRAG_SZ0) {
-		en_err(priv, "MTU size:%d requires frags but XDP running\n",
-		       new_mtu);
-		return -EOPNOTSUPP;
-	}
+	if (priv->tx_ring_num[TX_XDP] &&
+	    !mlx4_en_check_xdp_mtu(dev, new_mtu))
+		return -ENOTSUPP;
+
 	dev->mtu = new_mtu;
 
 	if (netif_running(dev)) {
@@ -2715,10 +2729,8 @@ static int mlx4_xdp_set(struct net_device *dev, struct bpf_prog *prog)
 		return 0;
 	}
 
-	if (priv->num_frags > 1) {
-		en_err(priv, "Cannot set XDP if MTU requires multiple frags\n");
+	if (!mlx4_en_check_xdp_mtu(dev, dev->mtu))
 		return -EOPNOTSUPP;
-	}
 
 	tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
 	if (!tmp)

drivers/net/ethernet/mellanox/mlx4/en_rx.c

@@ -1164,37 +1164,39 @@ static const int frag_sizes[] = {
 
 void mlx4_en_calc_rx_buf(struct net_device *dev)
 {
-	enum dma_data_direction dma_dir = PCI_DMA_FROMDEVICE;
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	int eff_mtu = MLX4_EN_EFF_MTU(dev->mtu);
-	int order = MLX4_EN_ALLOC_PREFER_ORDER;
-	u32 align = SMP_CACHE_BYTES;
-	int buf_size = 0;
 	int i = 0;
 
 	/* bpf requires buffers to be set up as 1 packet per page.
 	 * This only works when num_frags == 1.
 	 */
 	if (priv->tx_ring_num[TX_XDP]) {
-		dma_dir = PCI_DMA_BIDIRECTIONAL;
-		/* This will gain efficient xdp frame recycling at the expense
-		 * of more costly truesize accounting
+		priv->frag_info[0].order = 0;
+		priv->frag_info[0].frag_size = eff_mtu;
+		priv->frag_info[0].frag_prefix_size = 0;
+		/* This will gain efficient xdp frame recycling at the
+		 * expense of more costly truesize accounting
 		 */
-		align = PAGE_SIZE;
-		order = 0;
-	}
-
-	while (buf_size < eff_mtu) {
-		priv->frag_info[i].order = order;
-		priv->frag_info[i].frag_size =
-			(eff_mtu > buf_size + frag_sizes[i]) ?
-				frag_sizes[i] : eff_mtu - buf_size;
-		priv->frag_info[i].frag_prefix_size = buf_size;
-		priv->frag_info[i].frag_stride =
-				ALIGN(priv->frag_info[i].frag_size, align);
-		priv->frag_info[i].dma_dir = dma_dir;
-		buf_size += priv->frag_info[i].frag_size;
-		i++;
+		priv->frag_info[0].frag_stride = PAGE_SIZE;
+		priv->frag_info[0].dma_dir = PCI_DMA_BIDIRECTIONAL;
+		i = 1;
+	} else {
+		int buf_size = 0;
+
+		while (buf_size < eff_mtu) {
+			priv->frag_info[i].order = MLX4_EN_ALLOC_PREFER_ORDER;
+			priv->frag_info[i].frag_size =
+				(eff_mtu > buf_size + frag_sizes[i]) ?
+					frag_sizes[i] : eff_mtu - buf_size;
+			priv->frag_info[i].frag_prefix_size = buf_size;
+			priv->frag_info[i].frag_stride =
+				ALIGN(priv->frag_info[i].frag_size,
+				      SMP_CACHE_BYTES);
+			priv->frag_info[i].dma_dir = PCI_DMA_FROMDEVICE;
+			buf_size += priv->frag_info[i].frag_size;
+			i++;
+		}
 	}
 
 	priv->num_frags = i;