can: cc770: add driver core for the Bosch CC770 and Intel AN82527

Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/can/Kconfig

@@ -116,6 +116,8 @@ source "drivers/net/can/sja1000/Kconfig"
 
 source "drivers/net/can/c_can/Kconfig"
 
+source "drivers/net/can/cc770/Kconfig"
+
 source "drivers/net/can/usb/Kconfig"
 
 source "drivers/net/can/softing/Kconfig"

drivers/net/can/Makefile

@@ -14,6 +14,7 @@ obj-y				+= softing/
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
 obj-$(CONFIG_CAN_MSCAN)		+= mscan/
 obj-$(CONFIG_CAN_C_CAN)		+= c_can/
+obj-$(CONFIG_CAN_CC770)		+= cc770/
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o
 obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o

drivers/net/can/cc770/Kconfig

+menuconfig CAN_CC770
+	tristate "Bosch CC770 and Intel AN82527 devices"
+	depends on CAN_DEV && HAS_IOMEM

drivers/net/can/cc770/Makefile

+#
+#  Makefile for the Bosch CC770 CAN controller drivers.
+#
+
+obj-$(CONFIG_CAN_CC770) += cc770.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG

drivers/net/can/cc770/cc770.h

+/*
+ * cc770.h - Bosch CC770 and Intel AN82527 network device driver
+ *
+ * Copyright (C) 2009, 2011 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Derived from the old Socket-CAN i82527 driver:
+ *
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ */
+
+#ifndef CC770_DEV_H
+#define CC770_DEV_H
+
+#include <linux/can/dev.h>
+
+struct cc770_msgobj {
+	u8 ctrl0;
+	u8 ctrl1;
+	u8 id[4];
+	u8 config;
+	u8 data[8];
+	u8 dontuse;		/* padding */
+} __attribute__ ((packed));
+
+struct cc770_regs {
+	union {
+		struct cc770_msgobj msgobj[16]; /* Message object 1..15 */
+		struct {
+			u8 control;		/* Control Register */
+			u8 status;		/* Status Register */
+			u8 cpu_interface;	/* CPU Interface Register */
+			u8 dontuse1;
+			u8 high_speed_read[2];	/* High Speed Read */
+			u8 global_mask_std[2];	/* Standard Global Mask */
+			u8 global_mask_ext[4];	/* Extended Global Mask */
+			u8 msg15_mask[4];	/* Message 15 Mask */
+			u8 dontuse2[15];
+			u8 clkout;		/* Clock Out Register */
+			u8 dontuse3[15];
+			u8 bus_config;		/* Bus Configuration Register */
+			u8 dontuse4[15];
+			u8 bit_timing_0;	/* Bit Timing Register byte 0 */
+			u8 dontuse5[15];
+			u8 bit_timing_1;	/* Bit Timing Register byte 1 */
+			u8 dontuse6[15];
+			u8 interrupt;		/* Interrupt Register */
+			u8 dontuse7[15];
+			u8 rx_error_counter;	/* Receive Error Counter */
+			u8 dontuse8[15];
+			u8 tx_error_counter;	/* Transmit Error Counter */
+			u8 dontuse9[31];
+			u8 p1_conf;
+			u8 dontuse10[15];
+			u8 p2_conf;
+			u8 dontuse11[15];
+			u8 p1_in;
+			u8 dontuse12[15];
+			u8 p2_in;
+			u8 dontuse13[15];
+			u8 p1_out;
+			u8 dontuse14[15];
+			u8 p2_out;
+			u8 dontuse15[15];
+			u8 serial_reset_addr;
+		};
+	};
+} __attribute__ ((packed));
+
+/* Control Register (0x00) */
+#define CTRL_INI	0x01	/* Initialization */
+#define CTRL_IE		0x02	/* Interrupt Enable */
+#define CTRL_SIE	0x04	/* Status Interrupt Enable */
+#define CTRL_EIE	0x08	/* Error Interrupt Enable */
+#define CTRL_EAF	0x20	/* Enable additional functions */
+#define CTRL_CCE	0x40	/* Change Configuration Enable */
+
+/* Status Register (0x01) */
+#define STAT_LEC_STUFF	0x01	/* Stuff error */
+#define STAT_LEC_FORM	0x02	/* Form error */
+#define STAT_LEC_ACK	0x03	/* Acknowledgement error */
+#define STAT_LEC_BIT1	0x04	/* Bit1 error */
+#define STAT_LEC_BIT0	0x05	/* Bit0 error */
+#define STAT_LEC_CRC	0x06	/* CRC error */
+#define STAT_LEC_MASK	0x07	/* Last Error Code mask */
+#define STAT_TXOK	0x08	/* Transmit Message Successfully */
+#define STAT_RXOK	0x10	/* Receive Message Successfully */
+#define STAT_WAKE	0x20	/* Wake Up Status */
+#define STAT_WARN	0x40	/* Warning Status */
+#define STAT_BOFF	0x80	/* Bus Off Status */
+
+/* CPU Interface Register (0x02) */
+#define CPUIF_CEN	0x01	/* Clock Out Enable */
+#define CPUIF_MUX	0x04	/* Multiplex */
+#define CPUIF_SLP	0x08	/* Sleep */
+#define CPUIF_PWD	0x10	/* Power Down Mode */
+#define CPUIF_DMC	0x20	/* Divide Memory Clock */
+#define CPUIF_DSC	0x40	/* Divide System Clock */
+#define CPUIF_RST	0x80	/* Hardware Reset Status */
+
+/* Clock Out Register (0x1f) */
+#define CLKOUT_CD_MASK  0x0f	/* Clock Divider mask */
+#define CLKOUT_SL_MASK	0x30	/* Slew Rate mask */
+#define CLKOUT_SL_SHIFT	4
+
+/* Bus Configuration Register (0x2f) */
+#define BUSCFG_DR0	0x01	/* Disconnect RX0 Input / Select RX input */
+#define BUSCFG_DR1	0x02	/* Disconnect RX1 Input / Silent mode */
+#define BUSCFG_DT1	0x08	/* Disconnect TX1 Output */
+#define BUSCFG_POL	0x20	/* Polarity dominant or recessive */
+#define BUSCFG_CBY	0x40	/* Input Comparator Bypass */
+
+/* Message Control Register 0 (Base Address + 0x0) */
+#define INTPND_RES	0x01	/* No Interrupt pending */
+#define INTPND_SET	0x02	/* Interrupt pending */
+#define INTPND_UNC	0x03
+#define RXIE_RES	0x04	/* Receive Interrupt Disable */
+#define RXIE_SET	0x08	/* Receive Interrupt Enable */
+#define RXIE_UNC	0x0c
+#define TXIE_RES	0x10	/* Transmit Interrupt Disable */
+#define TXIE_SET	0x20	/* Transmit Interrupt Enable */
+#define TXIE_UNC	0x30
+#define MSGVAL_RES	0x40	/* Message Invalid */
+#define MSGVAL_SET	0x80	/* Message Valid */
+#define MSGVAL_UNC	0xc0
+
+/* Message Control Register 1 (Base Address + 0x01) */
+#define NEWDAT_RES	0x01	/* No New Data */
+#define NEWDAT_SET	0x02	/* New Data */
+#define NEWDAT_UNC	0x03
+#define MSGLST_RES	0x04	/* No Message Lost */
+#define MSGLST_SET	0x08	/* Message Lost */
+#define MSGLST_UNC	0x0c
+#define CPUUPD_RES	0x04	/* No CPU Updating */
+#define CPUUPD_SET	0x08	/* CPU Updating */
+#define CPUUPD_UNC	0x0c
+#define TXRQST_RES	0x10	/* No Transmission Request */
+#define TXRQST_SET	0x20	/* Transmission Request */
+#define TXRQST_UNC	0x30
+#define RMTPND_RES	0x40	/* No Remote Request Pending */
+#define RMTPND_SET	0x80	/* Remote Request Pending */
+#define RMTPND_UNC	0xc0
+
+/* Message Configuration Register (Base Address + 0x06) */
+#define MSGCFG_XTD	0x04	/* Extended Identifier */
+#define MSGCFG_DIR	0x08	/* Direction is Transmit */
+
+#define MSGOBJ_FIRST	1
+#define MSGOBJ_LAST	15
+
+#define CC770_IO_SIZE	0x100
+#define CC770_MAX_IRQ	20	/* max. number of interrupts handled in ISR */
+
+#define CC770_ECHO_SKB_MAX	1
+
+#define cc770_read_reg(priv, member)					\
+	priv->read_reg(priv, offsetof(struct cc770_regs, member))
+
+#define cc770_write_reg(priv, member, value)				\
+	priv->write_reg(priv, offsetof(struct cc770_regs, member), value)
+
+/*
+ * Message objects and flags used by this driver
+ */
+#define CC770_OBJ_FLAG_RX 	0x01
+#define CC770_OBJ_FLAG_RTR	0x02
+#define CC770_OBJ_FLAG_EFF	0x04
+
+enum {
+	CC770_OBJ_RX0 = 0,	/* for receiving normal messages */
+	CC770_OBJ_RX1,		/* for receiving normal messages */
+	CC770_OBJ_RX_RTR0,	/* for receiving remote transmission requests */
+	CC770_OBJ_RX_RTR1,	/* for receiving remote transmission requests */
+	CC770_OBJ_TX,		/* for sending messages */
+	CC770_OBJ_MAX
+};
+
+#define obj2msgobj(o)	(MSGOBJ_LAST - (o)) /* message object 11..15 */
+
+/*
+ * CC770 private data structure
+ */
+struct cc770_priv {
+	struct can_priv can;	/* must be the first member */
+	int open_time;
+	struct sk_buff *echo_skb;
+
+	/* the lower-layer is responsible for appropriate locking */
+	u8 (*read_reg)(const struct cc770_priv *priv, int reg);
+	void (*write_reg)(const struct cc770_priv *priv, int reg, u8 val);
+	void (*pre_irq)(const struct cc770_priv *priv);
+	void (*post_irq)(const struct cc770_priv *priv);
+
+	void *priv;		/* for board-specific data */
+	struct net_device *dev;
+
+	void __iomem *reg_base;	/* ioremap'ed address to registers */
+	unsigned long irq_flags;	/* for request_irq() */
+
+	unsigned char obj_flags[CC770_OBJ_MAX];
+	u8 control_normal_mode;	/* Control register for normal mode */
+	u8 cpu_interface;	/* CPU interface register */
+	u8 clkout;		/* Clock out register */
+	u8 bus_config;		/* Bus conffiguration register */
+};
+
+struct net_device *alloc_cc770dev(int sizeof_priv);
+void free_cc770dev(struct net_device *dev);
+int register_cc770dev(struct net_device *dev);
+void unregister_cc770dev(struct net_device *dev);
+
+#endif /* CC770_DEV_H */