Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 b3c911ee 编写于 作者: J John W. Linville
浏览文件
操作

Merge branch 'master' of... 

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/dvm/testmode.c
	drivers/net/wireless/iwlwifi/pcie/trans.c
上级 43b03f1f daf67ce8
展开全部 隐藏空白更改
内联 并排
Showing with 4743 addition and 2966 deletion
drivers/bluetooth/bluecard_cs.c
浏览文件 @ b3c911ee
......@@ -231,12 +231,12 @@ static void bluecard_write_wakeup(bluecard_info_t *info)
}
do {
register unsigned int iobase = info->p_dev->resource[0]->start;
register unsigned int offset;
register unsigned char command;
register unsigned long ready_bit;
unsigned int iobase = info->p_dev->resource[0]->start;
unsigned int offset;
unsigned char command;
unsigned long ready_bit;
register struct sk_buff *skb;
register int len;
int len;
clear_bit(XMIT_WAKEUP, &(info->tx_state));
......
drivers/bluetooth/bpa10x.c
浏览文件 @ b3c911ee
......@@ -470,7 +470,7 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
hdev->flush = bpa10x_flush;
hdev->send = bpa10x_send_frame;
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
err = hci_register_dev(hdev);
if (err < 0) {
......
drivers/bluetooth/bt3c_cs.c
浏览文件 @ b3c911ee
......@@ -186,9 +186,9 @@ static void bt3c_write_wakeup(bt3c_info_t *info)
return;
do {
register unsigned int iobase = info->p_dev->resource[0]->start;
unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
int len;
if (!pcmcia_dev_present(info->p_dev))
break;
......
drivers/bluetooth/btmrvl_sdio.c
浏览文件 @ b3c911ee
......@@ -110,6 +110,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
/* Marvell SD8787 Bluetooth AMP device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911B),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
/* Marvell SD8797 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
......
drivers/bluetooth/btuart_cs.c
浏览文件 @ b3c911ee
......@@ -140,9 +140,9 @@ static void btuart_write_wakeup(btuart_info_t *info)
}
do {
register unsigned int iobase = info->p_dev->resource[0]->start;
unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
int len;
clear_bit(XMIT_WAKEUP, &(info->tx_state));
......
drivers/bluetooth/btusb.c
浏览文件 @ b3c911ee
......@@ -21,15 +21,7 @@
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <net/bluetooth/bluetooth.h>
......@@ -1026,7 +1018,7 @@ static int btusb_probe(struct usb_interface *intf,
data->isoc = usb_ifnum_to_if(data->udev, 1);
if (!reset)
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
if (!disable_scofix)
......@@ -1038,7 +1030,7 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_DIGIANSWER) {
data->cmdreq_type = USB_TYPE_VENDOR;
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
}
if (id->driver_info & BTUSB_CSR) {
......@@ -1046,7 +1038,7 @@ static int btusb_probe(struct usb_interface *intf,
/* Old firmware would otherwise execute USB reset */
if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117)
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
}
if (id->driver_info & BTUSB_SNIFFER) {
......
drivers/bluetooth/dtl1_cs.c
浏览文件 @ b3c911ee
......@@ -144,9 +144,9 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
}
do {
register unsigned int iobase = info->p_dev->resource[0]->start;
unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
int len;
clear_bit(XMIT_WAKEUP, &(info->tx_state));
......
drivers/bluetooth/hci_bcsp.c
浏览文件 @ b3c911ee
......@@ -552,7 +552,7 @@ static u16 bscp_get_crc(struct bcsp_struct *bcsp)
static int bcsp_recv(struct hci_uart *hu, void *data, int count)
{
struct bcsp_struct *bcsp = hu->priv;
register unsigned char *ptr;
unsigned char *ptr;
BT_DBG("hu %p count %d rx_state %d rx_count %ld",
hu, count, bcsp->rx_state, bcsp->rx_count);
......
drivers/bluetooth/hci_h4.c
浏览文件 @ b3c911ee
......@@ -126,7 +126,7 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
static inline int h4_check_data_len(struct h4_struct *h4, int len)
{
register int room = skb_tailroom(h4->rx_skb);
int room = skb_tailroom(h4->rx_skb);
BT_DBG("len %d room %d", len, room);
......
drivers/bluetooth/hci_ldisc.c
浏览文件 @ b3c911ee
......@@ -394,7 +394,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
hdev->dev_type = HCI_AMP;
......
drivers/bluetooth/hci_ll.c
浏览文件 @ b3c911ee
......@@ -348,7 +348,7 @@ static int ll_enqueue(struct hci_uart *hu, struct sk_buff *skb)
static inline int ll_check_data_len(struct ll_struct *ll, int len)
{
register int room = skb_tailroom(ll->rx_skb);
int room = skb_tailroom(ll->rx_skb);
BT_DBG("len %d room %d", len, room);
......@@ -374,11 +374,11 @@ static inline int ll_check_data_len(struct ll_struct *ll, int len)
static int ll_recv(struct hci_uart *hu, void *data, int count)
{
struct ll_struct *ll = hu->priv;
register char *ptr;
char *ptr;
struct hci_event_hdr *eh;
struct hci_acl_hdr *ah;
struct hci_sco_hdr *sh;
register int len, type, dlen;
int len, type, dlen;
BT_DBG("hu %p count %d rx_state %ld rx_count %ld", hu, count, ll->rx_state, ll->rx_count);
......
drivers/net/wireless/ath/ath9k/ar9003_mac.c
浏览文件 @ b3c911ee
......@@ -181,11 +181,14 @@ static bool ar9003_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
u32 mask2 = 0;
struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath_common *common = ath9k_hw_common(ah);
u32 sync_cause = 0, async_cause;
u32 sync_cause = 0, async_cause, async_mask = AR_INTR_MAC_IRQ;
if (ath9k_hw_mci_is_enabled(ah))
async_mask |= AR_INTR_ASYNC_MASK_MCI;
async_cause = REG_READ(ah, AR_INTR_ASYNC_CAUSE);
if (async_cause & (AR_INTR_MAC_IRQ | AR_INTR_ASYNC_MASK_MCI)) {
if (async_cause & async_mask) {
if ((REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M)
== AR_RTC_STATUS_ON)
isr = REG_READ(ah, AR_ISR);
......
drivers/net/wireless/ath/ath9k/ar9003_mci.c
浏览文件 @ b3c911ee
......@@ -321,7 +321,7 @@ void ar9003_mci_set_full_sleep(struct ath_hw *ah)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) &&
if (ar9003_mci_state(ah, MCI_STATE_ENABLE) &&
(mci->bt_state != MCI_BT_SLEEP) &&
!mci->halted_bt_gpm) {
ar9003_mci_send_coex_halt_bt_gpm(ah, true, true);
......@@ -484,7 +484,7 @@ static void ar9003_mci_sync_bt_state(struct ath_hw *ah)
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 cur_bt_state;
cur_bt_state = ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL);
cur_bt_state = ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP);
if (mci->bt_state != cur_bt_state)
mci->bt_state = cur_bt_state;
......@@ -593,8 +593,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
if (!time_out)
break;
offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
&more_data);
offset = ar9003_mci_get_next_gpm_offset(ah, false, &more_data);
if (offset == MCI_GPM_INVALID)
continue;
......@@ -658,8 +657,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
time_out = 0;
while (more_data == MCI_GPM_MORE) {
offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
&more_data);
offset = ar9003_mci_get_next_gpm_offset(ah, false, &more_data);
if (offset == MCI_GPM_INVALID)
break;
......@@ -893,13 +891,16 @@ void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
udelay(100);
}
/* Check pending GPM msg before MCI Reset Rx */
ar9003_mci_check_gpm_offset(ah);
regval |= SM(1, AR_MCI_COMMAND2_RESET_RX);
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
udelay(1);
regval &= ~SM(1, AR_MCI_COMMAND2_RESET_RX);
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
ar9003_mci_get_next_gpm_offset(ah, true, NULL);
REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE,
(SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
......@@ -1010,38 +1011,32 @@ static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header,
}
}
void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
if (!mci->update_2g5g)
if (!mci->update_2g5g && !force)
return;
if (mci->is_2g) {
ar9003_mci_send_2g5g_status(ah, true);
ar9003_mci_send_lna_transfer(ah, true);
udelay(5);
REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
REG_SET_BIT(ah, AR_MCI_TX_CTRL,
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
REG_SET_BIT(ah, AR_BTCOEX_CTRL,
AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
ar9003_mci_osla_setup(ah, true);
} else {
ar9003_mci_send_lna_take(ah, true);
udelay(5);
REG_SET_BIT(ah, AR_MCI_TX_CTRL,
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
ar9003_mci_send_2g5g_status(ah, true);
ar9003_mci_osla_setup(ah, false);
if (!force)
ar9003_mci_send_2g5g_status(ah, true);
}
}
......@@ -1169,11 +1164,10 @@ void ar9003_mci_cleanup(struct ath_hw *ah)
}
EXPORT_SYMBOL(ar9003_mci_cleanup);
u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 value = 0, more_gpm = 0, gpm_ptr;
u32 value = 0;
u8 query_type;
switch (state_type) {
......@@ -1185,81 +1179,6 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
value = 0;
}
value &= AR_BTCOEX_CTRL_MCI_MODE_EN;
break;
case MCI_STATE_INIT_GPM_OFFSET:
value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
mci->gpm_idx = value;
break;
case MCI_STATE_NEXT_GPM_OFFSET:
case MCI_STATE_LAST_GPM_OFFSET:
/*
* This could be useful to avoid new GPM message interrupt which
* may lead to spurious interrupt after power sleep, or multiple
* entry of ath_mci_intr().
* Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
* alleviate this effect, but clearing GPM RX interrupt bit is
* safe, because whether this is called from hw or driver code
* there must be an interrupt bit set/triggered initially
*/
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
AR_MCI_INTERRUPT_RX_MSG_GPM);
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
value = gpm_ptr;
if (value == 0)
value = mci->gpm_len - 1;
else if (value >= mci->gpm_len) {
if (value != 0xFFFF)
value = 0;
} else {
value--;
}
if (value == 0xFFFF) {
value = MCI_GPM_INVALID;
more_gpm = MCI_GPM_NOMORE;
} else if (state_type == MCI_STATE_NEXT_GPM_OFFSET) {
if (gpm_ptr == mci->gpm_idx) {
value = MCI_GPM_INVALID;
more_gpm = MCI_GPM_NOMORE;
} else {
for (;;) {
u32 temp_index;
/* skip reserved GPM if any */
if (value != mci->gpm_idx)
more_gpm = MCI_GPM_MORE;
else
more_gpm = MCI_GPM_NOMORE;
temp_index = mci->gpm_idx;
mci->gpm_idx++;
if (mci->gpm_idx >=
mci->gpm_len)
mci->gpm_idx = 0;
if (ar9003_mci_is_gpm_valid(ah,
temp_index)) {
value = temp_index;
break;
}
if (more_gpm == MCI_GPM_NOMORE) {
value = MCI_GPM_INVALID;
break;
}
}
}
if (p_data)
*p_data = more_gpm;
}
if (value != MCI_GPM_INVALID)
value <<= 4;
break;
case MCI_STATE_LAST_SCHD_MSG_OFFSET:
value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
......@@ -1272,21 +1191,6 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
AR_MCI_RX_REMOTE_SLEEP) ?
MCI_BT_SLEEP : MCI_BT_AWAKE;
break;
case MCI_STATE_CONT_RSSI_POWER:
value = MS(mci->cont_status, AR_MCI_CONT_RSSI_POWER);
break;
case MCI_STATE_CONT_PRIORITY:
value = MS(mci->cont_status, AR_MCI_CONT_RRIORITY);
break;
case MCI_STATE_CONT_TXRX:
value = MS(mci->cont_status, AR_MCI_CONT_TXRX);
break;
case MCI_STATE_BT:
value = mci->bt_state;
break;
case MCI_STATE_SET_BT_SLEEP:
mci->bt_state = MCI_BT_SLEEP;
break;
case MCI_STATE_SET_BT_AWAKE:
mci->bt_state = MCI_BT_AWAKE;
ar9003_mci_send_coex_version_query(ah, true);
......@@ -1295,7 +1199,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
if (mci->unhalt_bt_gpm)
ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
ar9003_mci_2g5g_switch(ah, true);
ar9003_mci_2g5g_switch(ah, false);
break;
case MCI_STATE_SET_BT_CAL_START:
mci->bt_state = MCI_BT_CAL_START;
......@@ -1319,34 +1223,6 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
case MCI_STATE_SEND_WLAN_COEX_VERSION:
ar9003_mci_send_coex_version_response(ah, true);
break;
case MCI_STATE_SET_BT_COEX_VERSION:
if (!p_data)
ath_dbg(common, MCI,
"MCI Set BT Coex version with NULL data!!\n");
else {
mci->bt_ver_major = (*p_data >> 8) & 0xff;
mci->bt_ver_minor = (*p_data) & 0xff;
mci->bt_version_known = true;
ath_dbg(common, MCI, "MCI BT version set: %d.%d\n",
mci->bt_ver_major, mci->bt_ver_minor);
}
break;
case MCI_STATE_SEND_WLAN_CHANNELS:
if (p_data) {
if (((mci->wlan_channels[1] & 0xffff0000) ==
(*(p_data + 1) & 0xffff0000)) &&
(mci->wlan_channels[2] == *(p_data + 2)) &&
(mci->wlan_channels[3] == *(p_data + 3)))
break;
mci->wlan_channels[0] = *p_data++;
mci->wlan_channels[1] = *p_data++;
mci->wlan_channels[2] = *p_data++;
mci->wlan_channels[3] = *p_data++;
}
mci->wlan_channels_update = true;
ar9003_mci_send_coex_wlan_channels(ah, true);
break;
case MCI_STATE_SEND_VERSION_QUERY:
ar9003_mci_send_coex_version_query(ah, true);
break;
......@@ -1354,29 +1230,12 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
query_type = MCI_GPM_COEX_QUERY_BT_TOPOLOGY;
ar9003_mci_send_coex_bt_status_query(ah, true, query_type);
break;
case MCI_STATE_NEED_FLUSH_BT_INFO:
/*
* btcoex_hw.mci.unhalt_bt_gpm means whether it's
* needed to send UNHALT message. It's set whenever
* there's a request to send HALT message.
* mci_halted_bt_gpm means whether HALT message is sent
* out successfully.
*
* Checking (mci_unhalt_bt_gpm == false) instead of
* checking (ah->mci_halted_bt_gpm == false) will make
* sure currently is in UNHALT-ed mode and BT can
* respond to status query.
*/
value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
if (p_data)
mci->need_flush_btinfo = (*p_data != 0) ? true : false;
break;
case MCI_STATE_RECOVER_RX:
ar9003_mci_prep_interface(ah);
mci->query_bt = true;
mci->need_flush_btinfo = true;
ar9003_mci_send_coex_wlan_channels(ah, true);
ar9003_mci_2g5g_switch(ah, true);
ar9003_mci_2g5g_switch(ah, false);
break;
case MCI_STATE_NEED_FTP_STOMP:
value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP);
......@@ -1404,3 +1263,154 @@ void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
/* Force another 2g5g update at next scanning */
mci->update_2g5g = true;
}
void ar9003_mci_set_power_awake(struct ath_hw *ah)
{
u32 btcoex_ctrl2, diag_sw;
int i;
u8 lna_ctrl, bt_sleep;
for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
btcoex_ctrl2 = REG_READ(ah, AR_BTCOEX_CTRL2);
if (btcoex_ctrl2 != 0xdeadbeef)
break;
udelay(AH_TIME_QUANTUM);
}
REG_WRITE(ah, AR_BTCOEX_CTRL2, (btcoex_ctrl2 | BIT(23)));
for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
diag_sw = REG_READ(ah, AR_DIAG_SW);
if (diag_sw != 0xdeadbeef)
break;
udelay(AH_TIME_QUANTUM);
}
REG_WRITE(ah, AR_DIAG_SW, (diag_sw | BIT(27) | BIT(19) | BIT(18)));
lna_ctrl = REG_READ(ah, AR_OBS_BUS_CTRL) & 0x3;
bt_sleep = REG_READ(ah, AR_MCI_RX_STATUS) & AR_MCI_RX_REMOTE_SLEEP;
REG_WRITE(ah, AR_BTCOEX_CTRL2, btcoex_ctrl2);
REG_WRITE(ah, AR_DIAG_SW, diag_sw);
if (bt_sleep && (lna_ctrl == 2)) {
REG_SET_BIT(ah, AR_BTCOEX_RC, 0x1);
REG_CLR_BIT(ah, AR_BTCOEX_RC, 0x1);
udelay(50);
}
}
void ar9003_mci_check_gpm_offset(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 offset;
/*
* This should only be called before "MAC Warm Reset" or "MCI Reset Rx".
*/
offset = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
if (mci->gpm_idx == offset)
return;
ath_dbg(common, MCI, "GPM cached write pointer mismatch %d %d\n",
mci->gpm_idx, offset);
mci->query_bt = true;
mci->need_flush_btinfo = true;
mci->gpm_idx = 0;
}
u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, bool first, u32 *more)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 offset, more_gpm = 0, gpm_ptr;
if (first) {
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
mci->gpm_idx = gpm_ptr;
return gpm_ptr;
}
/*
* This could be useful to avoid new GPM message interrupt which
* may lead to spurious interrupt after power sleep, or multiple
* entry of ath_mci_intr().
* Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
* alleviate this effect, but clearing GPM RX interrupt bit is
* safe, because whether this is called from hw or driver code
* there must be an interrupt bit set/triggered initially
*/
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
AR_MCI_INTERRUPT_RX_MSG_GPM);
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
offset = gpm_ptr;
if (!offset)
offset = mci->gpm_len - 1;
else if (offset >= mci->gpm_len) {
if (offset != 0xFFFF)
offset = 0;
} else {
offset--;
}
if ((offset == 0xFFFF) || (gpm_ptr == mci->gpm_idx)) {
offset = MCI_GPM_INVALID;
more_gpm = MCI_GPM_NOMORE;
goto out;
}
for (;;) {
u32 temp_index;
/* skip reserved GPM if any */
if (offset != mci->gpm_idx)
more_gpm = MCI_GPM_MORE;
else
more_gpm = MCI_GPM_NOMORE;
temp_index = mci->gpm_idx;
mci->gpm_idx++;
if (mci->gpm_idx >= mci->gpm_len)
mci->gpm_idx = 0;
if (ar9003_mci_is_gpm_valid(ah, temp_index)) {
offset = temp_index;
break;
}
if (more_gpm == MCI_GPM_NOMORE) {
offset = MCI_GPM_INVALID;
break;
}
}
if (offset != MCI_GPM_INVALID)
offset <<= 4;
out:
if (more)
*more = more_gpm;
return offset;
}
EXPORT_SYMBOL(ar9003_mci_get_next_gpm_offset);
void ar9003_mci_set_bt_version(struct ath_hw *ah, u8 major, u8 minor)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
mci->bt_ver_major = major;
mci->bt_ver_minor = minor;
mci->bt_version_known = true;
ath_dbg(ath9k_hw_common(ah), MCI, "MCI BT version set: %d.%d\n",
mci->bt_ver_major, mci->bt_ver_minor);
}
EXPORT_SYMBOL(ar9003_mci_set_bt_version);
void ar9003_mci_send_wlan_channels(struct ath_hw *ah)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
mci->wlan_channels_update = true;
ar9003_mci_send_coex_wlan_channels(ah, true);
}
EXPORT_SYMBOL(ar9003_mci_send_wlan_channels);
drivers/net/wireless/ath/ath9k/ar9003_mci.h
浏览文件 @ b3c911ee
......@@ -189,26 +189,15 @@ enum mci_bt_state {
/* Type of state query */
enum mci_state_type {
MCI_STATE_ENABLE,
MCI_STATE_INIT_GPM_OFFSET,
MCI_STATE_NEXT_GPM_OFFSET,
MCI_STATE_LAST_GPM_OFFSET,
MCI_STATE_BT,
MCI_STATE_SET_BT_SLEEP,
MCI_STATE_SET_BT_AWAKE,
MCI_STATE_SET_BT_CAL_START,
MCI_STATE_SET_BT_CAL,
MCI_STATE_LAST_SCHD_MSG_OFFSET,
MCI_STATE_REMOTE_SLEEP,
MCI_STATE_CONT_RSSI_POWER,
MCI_STATE_CONT_PRIORITY,
MCI_STATE_CONT_TXRX,
MCI_STATE_RESET_REQ_WAKE,
MCI_STATE_SEND_WLAN_COEX_VERSION,
MCI_STATE_SET_BT_COEX_VERSION,
MCI_STATE_SEND_WLAN_CHANNELS,
MCI_STATE_SEND_VERSION_QUERY,
MCI_STATE_SEND_STATUS_QUERY,
MCI_STATE_NEED_FLUSH_BT_INFO,
MCI_STATE_SET_CONCUR_TX_PRI,
MCI_STATE_RECOVER_RX,
MCI_STATE_NEED_FTP_STOMP,
......@@ -259,14 +248,15 @@ enum mci_gpm_coex_opcode {
bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
u32 *payload, u8 len, bool wait_done,
bool check_bt);
u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data);
u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type);
void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
u16 len, u32 sched_addr);
void ar9003_mci_cleanup(struct ath_hw *ah);
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
u32 *rx_msg_intr);
void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah);
u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, bool first, u32 *more);
void ar9003_mci_set_bt_version(struct ath_hw *ah, u8 major, u8 minor);
void ar9003_mci_send_wlan_channels(struct ath_hw *ah);
/*
* These functions are used by ath9k_hw.
*/
......@@ -277,7 +267,7 @@ void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep);
void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable);
void ar9003_mci_init_cal_done(struct ath_hw *ah);
void ar9003_mci_set_full_sleep(struct ath_hw *ah);
void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done);
void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force);
void ar9003_mci_check_bt(struct ath_hw *ah);
bool ar9003_mci_start_reset(struct ath_hw *ah, struct ath9k_channel *chan);
int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
......@@ -285,6 +275,9 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
bool is_full_sleep);
void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked);
void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah);
void ar9003_mci_set_power_awake(struct ath_hw *ah);
void ar9003_mci_check_gpm_offset(struct ath_hw *ah);
#else
......@@ -322,6 +315,15 @@ static inline void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
static inline void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
{
}
static inline void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
{
}
static inline void ar9003_mci_set_power_awake(struct ath_hw *ah)
{
}
static inline void ar9003_mci_check_gpm_offset(struct ath_hw *ah)
{
}
#endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
#endif
drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
浏览文件 @ b3c911ee
......@@ -52,7 +52,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
{0x00009e04, 0x001c2020, 0x001c2020, 0x001c2020, 0x001c2020},
{0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000d8},
{0x00009e10, 0x92c88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec86d2e},
{0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3376605e, 0x33795d5e},
{0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3376605e, 0x32395d5e},
{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
......
drivers/net/wireless/ath/ath9k/ath9k.h
浏览文件 @ b3c911ee
......@@ -698,6 +698,7 @@ struct ath_softc {
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
struct ath_btcoex btcoex;
struct ath_mci_coex mci_coex;
struct work_struct mci_work;
#endif
struct ath_descdma txsdma;
......
drivers/net/wireless/ath/ath9k/gpio.c
浏览文件 @ b3c911ee
......@@ -202,7 +202,7 @@ static void ath_btcoex_period_timer(unsigned long data)
btcoex->bt_wait_time += btcoex->btcoex_period;
if (btcoex->bt_wait_time > ATH_BTCOEX_RX_WAIT_TIME) {
if (ar9003_mci_state(ah, MCI_STATE_NEED_FTP_STOMP, NULL) &&
if (ar9003_mci_state(ah, MCI_STATE_NEED_FTP_STOMP) &&
(mci->num_pan || mci->num_other_acl))
ah->btcoex_hw.mci.stomp_ftp =
(sc->rx.num_pkts < ATH_BTCOEX_STOMP_FTP_THRESH);
......@@ -232,7 +232,7 @@ static void ath_btcoex_period_timer(unsigned long data)
}
ath9k_ps_restore(sc);
timer_period = btcoex->btcoex_period / 1000;
timer_period = btcoex->btcoex_period;
mod_timer(&btcoex->period_timer, jiffies + msecs_to_jiffies(timer_period));
}
......@@ -267,10 +267,10 @@ static int ath_init_btcoex_timer(struct ath_softc *sc)
{
struct ath_btcoex *btcoex = &sc->btcoex;
btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD;
btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) * 1000 *
btcoex->btcoex_period / 100;
btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) *
btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) * 1000 *
btcoex->btcoex_period / 100;
setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
......
drivers/net/wireless/ath/ath9k/hw.c
浏览文件 @ b3c911ee
......@@ -1348,6 +1348,9 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
}
}
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_check_gpm_offset(ah);
REG_WRITE(ah, AR_RTC_RC, rst_flags);
REGWRITE_BUFFER_FLUSH(ah);
......@@ -1708,7 +1711,7 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan)
ath9k_hw_start_nfcal(ah, true);
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_2g5g_switch(ah, true);
ar9003_mci_2g5g_switch(ah, false);
if (AR_SREV_9271(ah))
ar9002_hw_load_ani_reg(ah, chan);
......@@ -1912,7 +1915,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ath9k_hw_set_dma(ah);
REG_WRITE(ah, AR_OBS, 8);
if (!ath9k_hw_mci_is_enabled(ah))
REG_WRITE(ah, AR_OBS, 8);
if (ah->config.rx_intr_mitigation) {
REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
......@@ -2111,6 +2115,9 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah)
AR_RTC_FORCE_WAKE_EN);
udelay(50);
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_set_power_awake(ah);
for (i = POWER_UP_TIME / 50; i > 0; i--) {
val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
if (val == AR_RTC_STATUS_ON)
......
drivers/net/wireless/ath/ath9k/link.c
浏览文件 @ b3c911ee
......@@ -136,6 +136,14 @@ void ath_hw_pll_work(struct work_struct *work)
u32 pll_sqsum;
struct ath_softc *sc = container_of(work, struct ath_softc,
hw_pll_work.work);
/*
* ensure that the PLL WAR is executed only
* after the STA is associated (or) if the
* beaconing had started in interfaces that
* uses beacons.
*/
if (!test_bit(SC_OP_BEACONS, &sc->sc_flags))
return;
ath9k_ps_wakeup(sc);
pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah);
......
drivers/net/wireless/ath/ath9k/main.c
浏览文件 @ b3c911ee
......@@ -150,6 +150,9 @@ static void __ath_cancel_work(struct ath_softc *sc)
cancel_work_sync(&sc->hw_check_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
cancel_work_sync(&sc->mci_work);
#endif
}
static void ath_cancel_work(struct ath_softc *sc)
......@@ -1033,15 +1036,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
}
}
if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
((vif->type == NL80211_IFTYPE_ADHOC) &&
sc->nvifs > 0)) {
ath_err(common, "Cannot create ADHOC interface when other"
" interfaces already exist.\n");
ret = -EINVAL;
goto out;
}
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->nvifs++;
......@@ -1066,15 +1060,6 @@ static int ath9k_change_interface(struct ieee80211_hw *hw,
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
/* See if new interface type is valid. */
if ((new_type == NL80211_IFTYPE_ADHOC) &&
(sc->nvifs > 1)) {
ath_err(common, "When using ADHOC, it must be the only"
" interface.\n");
ret = -EINVAL;
goto out;
}
if (ath9k_uses_beacons(new_type) &&
!ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
......@@ -1258,6 +1243,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return -EINVAL;
}
......
drivers/net/wireless/ath/ath9k/mci.c
浏览文件 @ b3c911ee
......@@ -20,7 +20,7 @@
#include "ath9k.h"
#include "mci.h"
static const u8 ath_mci_duty_cycle[] = { 0, 50, 60, 70, 80, 85, 90, 95, 98 };
static const u8 ath_mci_duty_cycle[] = { 55, 50, 60, 70, 80, 85, 90, 95, 98 };
static struct ath_mci_profile_info*
ath_mci_find_profile(struct ath_mci_profile *mci,
......@@ -28,11 +28,14 @@ ath_mci_find_profile(struct ath_mci_profile *mci,
{
struct ath_mci_profile_info *entry;
if (list_empty(&mci->info))
return NULL;
list_for_each_entry(entry, &mci->info, list) {
if (entry->conn_handle == info->conn_handle)
break;
return entry;
}
return entry;
return NULL;
}
static bool ath_mci_add_profile(struct ath_common *common,
......@@ -49,31 +52,21 @@ static bool ath_mci_add_profile(struct ath_common *common,
(info->type != MCI_GPM_COEX_PROFILE_VOICE))
return false;
entry = ath_mci_find_profile(mci, info);
if (entry) {
memcpy(entry, info, 10);
} else {
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry)
return false;
entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
if (!entry)
return false;
memcpy(entry, info, 10);
INC_PROF(mci, info);
list_add_tail(&info->list, &mci->info);
}
memcpy(entry, info, 10);
INC_PROF(mci, info);
list_add_tail(&entry->list, &mci->info);
return true;
}
static void ath_mci_del_profile(struct ath_common *common,
struct ath_mci_profile *mci,
struct ath_mci_profile_info *info)
struct ath_mci_profile_info *entry)
{
struct ath_mci_profile_info *entry;
entry = ath_mci_find_profile(mci, info);
if (!entry)
return;
......@@ -86,12 +79,16 @@ void ath_mci_flush_profile(struct ath_mci_profile *mci)
{
struct ath_mci_profile_info *info, *tinfo;
mci->aggr_limit = 0;
if (list_empty(&mci->info))
return;
list_for_each_entry_safe(info, tinfo, &mci->info, list) {
list_del(&info->list);
DEC_PROF(mci, info);
kfree(info);
}
mci->aggr_limit = 0;
}
static void ath_mci_adjust_aggr_limit(struct ath_btcoex *btcoex)
......@@ -123,6 +120,8 @@ static void ath_mci_update_scheme(struct ath_softc *sc)
if (mci_hw->config & ATH_MCI_CONFIG_DISABLE_TUNING)
goto skip_tuning;
btcoex->duty_cycle = ath_mci_duty_cycle[num_profile];
if (num_profile == 1) {
info = list_first_entry(&mci->info,
struct ath_mci_profile_info,
......@@ -181,12 +180,11 @@ static void ath_mci_update_scheme(struct ath_softc *sc)
if (IS_CHAN_5GHZ(sc->sc_ah->curchan))
return;
btcoex->duty_cycle += (mci->num_bdr ? ATH_MCI_MAX_DUTY_CYCLE : 0);
btcoex->duty_cycle += (mci->num_bdr ? ATH_MCI_BDR_DUTY_CYCLE : 0);
if (btcoex->duty_cycle > ATH_MCI_MAX_DUTY_CYCLE)
btcoex->duty_cycle = ATH_MCI_MAX_DUTY_CYCLE;
btcoex->btcoex_period *= 1000;
btcoex->btcoex_no_stomp = btcoex->btcoex_period *
btcoex->btcoex_no_stomp = btcoex->btcoex_period * 1000 *
(100 - btcoex->duty_cycle) / 100;
ath9k_hw_btcoex_enable(sc->sc_ah);
......@@ -197,20 +195,16 @@ static void ath_mci_cal_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
u32 payload[4] = {0, 0, 0, 0};
switch (opcode) {
case MCI_GPM_BT_CAL_REQ:
if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_AWAKE) {
ar9003_mci_state(ah, MCI_STATE_SET_BT_CAL_START, NULL);
if (mci_hw->bt_state == MCI_BT_AWAKE) {
ar9003_mci_state(ah, MCI_STATE_SET_BT_CAL_START);
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
} else {
ath_dbg(common, MCI, "MCI State mismatch: %d\n",
ar9003_mci_state(ah, MCI_STATE_BT, NULL));
}
break;
case MCI_GPM_BT_CAL_DONE:
ar9003_mci_state(ah, MCI_STATE_BT, NULL);
ath_dbg(common, MCI, "MCI State : %d\n", mci_hw->bt_state);
break;
case MCI_GPM_BT_CAL_GRANT:
MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_DONE);
......@@ -223,32 +217,42 @@ static void ath_mci_cal_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
}
}
static void ath9k_mci_work(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc, mci_work);
ath_mci_update_scheme(sc);
}
static void ath_mci_process_profile(struct ath_softc *sc,
struct ath_mci_profile_info *info)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_btcoex *btcoex = &sc->btcoex;
struct ath_mci_profile *mci = &btcoex->mci;
struct ath_mci_profile_info *entry = NULL;
entry = ath_mci_find_profile(mci, info);
if (entry)
memcpy(entry, info, 10);
if (info->start) {
if (!ath_mci_add_profile(common, mci, info))
if (!entry && !ath_mci_add_profile(common, mci, info))
return;
} else
ath_mci_del_profile(common, mci, info);
ath_mci_del_profile(common, mci, entry);
btcoex->btcoex_period = ATH_MCI_DEF_BT_PERIOD;
mci->aggr_limit = mci->num_sco ? 6 : 0;
if (NUM_PROF(mci)) {
btcoex->duty_cycle = ath_mci_duty_cycle[NUM_PROF(mci)];
if (NUM_PROF(mci))
btcoex->bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
btcoex->duty_cycle = ath_mci_duty_cycle[NUM_PROF(mci)];
} else {
else
btcoex->bt_stomp_type = mci->num_mgmt ? ATH_BTCOEX_STOMP_ALL :
ATH_BTCOEX_STOMP_LOW;
btcoex->duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
}
ath_mci_update_scheme(sc);
ieee80211_queue_work(sc->hw, &sc->mci_work);
}
static void ath_mci_process_status(struct ath_softc *sc,
......@@ -263,8 +267,6 @@ static void ath_mci_process_status(struct ath_softc *sc,
if (status->is_link)
return;
memset(&info, 0, sizeof(struct ath_mci_profile_info));
info.conn_handle = status->conn_handle;
if (ath_mci_find_profile(mci, &info))
return;
......@@ -284,7 +286,7 @@ static void ath_mci_process_status(struct ath_softc *sc,
} while (++i < ATH_MCI_MAX_PROFILE);
if (old_num_mgmt != mci->num_mgmt)
ath_mci_update_scheme(sc);
ieee80211_queue_work(sc->hw, &sc->mci_work);
}
static void ath_mci_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
......@@ -293,25 +295,20 @@ static void ath_mci_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
struct ath_mci_profile_info profile_info;
struct ath_mci_profile_status profile_status;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
u32 version;
u8 major;
u8 minor;
u8 major, minor;
u32 seq_num;
switch (opcode) {
case MCI_GPM_COEX_VERSION_QUERY:
version = ar9003_mci_state(ah, MCI_STATE_SEND_WLAN_COEX_VERSION,
NULL);
ar9003_mci_state(ah, MCI_STATE_SEND_WLAN_COEX_VERSION);
break;
case MCI_GPM_COEX_VERSION_RESPONSE:
major = *(rx_payload + MCI_GPM_COEX_B_MAJOR_VERSION);
minor = *(rx_payload + MCI_GPM_COEX_B_MINOR_VERSION);
version = (major << 8) + minor;
version = ar9003_mci_state(ah, MCI_STATE_SET_BT_COEX_VERSION,
&version);
ar9003_mci_set_bt_version(ah, major, minor);
break;
case MCI_GPM_COEX_STATUS_QUERY:
ar9003_mci_state(ah, MCI_STATE_SEND_WLAN_CHANNELS, NULL);
ar9003_mci_send_wlan_channels(ah);
break;
case MCI_GPM_COEX_BT_PROFILE_INFO:
memcpy(&profile_info,
......@@ -378,6 +375,7 @@ int ath_mci_setup(struct ath_softc *sc)
mci->gpm_buf.bf_addr, (mci->gpm_buf.bf_len >> 4),
mci->sched_buf.bf_paddr);
INIT_WORK(&sc->mci_work, ath9k_mci_work);
ath_dbg(common, MCI, "MCI Initialized\n");
return 0;
......@@ -405,6 +403,7 @@ void ath_mci_intr(struct ath_softc *sc)
struct ath_mci_coex *mci = &sc->mci_coex;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
u32 mci_int, mci_int_rxmsg;
u32 offset, subtype, opcode;
u32 *pgpm;
......@@ -413,8 +412,8 @@ void ath_mci_intr(struct ath_softc *sc)
ar9003_mci_get_interrupt(sc->sc_ah, &mci_int, &mci_int_rxmsg);
if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) == 0) {
ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
if (ar9003_mci_state(ah, MCI_STATE_ENABLE) == 0) {
ar9003_mci_get_next_gpm_offset(ah, true, NULL);
return;
}
......@@ -433,46 +432,41 @@ void ath_mci_intr(struct ath_softc *sc)
NULL, 0, true, false);
mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE;
ar9003_mci_state(ah, MCI_STATE_RESET_REQ_WAKE, NULL);
ar9003_mci_state(ah, MCI_STATE_RESET_REQ_WAKE);
/*
* always do this for recovery and 2G/5G toggling and LNA_TRANS
*/
ar9003_mci_state(ah, MCI_STATE_SET_BT_AWAKE, NULL);
ar9003_mci_state(ah, MCI_STATE_SET_BT_AWAKE);
}
if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING) {
mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING;
if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_SLEEP) {
if (ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL) !=
MCI_BT_SLEEP)
ar9003_mci_state(ah, MCI_STATE_SET_BT_AWAKE,
NULL);
}
if ((mci_hw->bt_state == MCI_BT_SLEEP) &&
(ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP) !=
MCI_BT_SLEEP))
ar9003_mci_state(ah, MCI_STATE_SET_BT_AWAKE);
}
if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING) {
mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING;
if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_AWAKE) {
if (ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL) !=
MCI_BT_AWAKE)
ar9003_mci_state(ah, MCI_STATE_SET_BT_SLEEP,
NULL);
}
if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
(ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP) !=
MCI_BT_AWAKE))
mci_hw->bt_state = MCI_BT_SLEEP;
}
if ((mci_int & AR_MCI_INTERRUPT_RX_INVALID_HDR) ||
(mci_int & AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT)) {
ar9003_mci_state(ah, MCI_STATE_RECOVER_RX, NULL);
ar9003_mci_state(ah, MCI_STATE_RECOVER_RX);
skip_gpm = true;
}
if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO) {
mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO;
offset = ar9003_mci_state(ah, MCI_STATE_LAST_SCHD_MSG_OFFSET,
NULL);
offset = ar9003_mci_state(ah, MCI_STATE_LAST_SCHD_MSG_OFFSET);
}
if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_GPM) {
......@@ -481,8 +475,8 @@ void ath_mci_intr(struct ath_softc *sc)
while (more_data == MCI_GPM_MORE) {
pgpm = mci->gpm_buf.bf_addr;
offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
&more_data);
offset = ar9003_mci_get_next_gpm_offset(ah, false,
&more_data);
if (offset == MCI_GPM_INVALID)
break;
......@@ -523,23 +517,17 @@ void ath_mci_intr(struct ath_softc *sc)
mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_LNA_INFO;
if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_CONT_INFO) {
int value_dbm = ar9003_mci_state(ah,
MCI_STATE_CONT_RSSI_POWER, NULL);
int value_dbm = MS(mci_hw->cont_status,
AR_MCI_CONT_RSSI_POWER);
mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_CONT_INFO;
if (ar9003_mci_state(ah, MCI_STATE_CONT_TXRX, NULL))
ath_dbg(common, MCI,
"MCI CONT_INFO: (tx) pri = %d, pwr = %d dBm\n",
ar9003_mci_state(ah,
MCI_STATE_CONT_PRIORITY, NULL),
value_dbm);
else
ath_dbg(common, MCI,
"MCI CONT_INFO: (rx) pri = %d,pwr = %d dBm\n",
ar9003_mci_state(ah,
MCI_STATE_CONT_PRIORITY, NULL),
value_dbm);
ath_dbg(common, MCI,
"MCI CONT_INFO: (%s) pri = %d pwr = %d dBm\n",
MS(mci_hw->cont_status, AR_MCI_CONT_TXRX) ?
"tx" : "rx",
MS(mci_hw->cont_status, AR_MCI_CONT_PRIORITY),
value_dbm);
}
if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_CONT_NACK)
......
drivers/net/wireless/ath/ath9k/rc.c
浏览文件 @ b3c911ee
......@@ -770,7 +770,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
struct ieee80211_tx_rate *rates = tx_info->control.rates;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
__le16 fc = hdr->frame_control;
u8 try_per_rate, i = 0, rix, high_rix;
u8 try_per_rate, i = 0, rix;
int is_probe = 0;
if (rate_control_send_low(sta, priv_sta, txrc))
......@@ -791,7 +791,6 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
rate_table = ath_rc_priv->rate_table;
rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table,
&is_probe, false);
high_rix = rix;
/*
* If we're in HT mode and both us and our peer supports LDPC.
......@@ -839,16 +838,16 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
try_per_rate = 8;
/*
* Use a legacy rate as last retry to ensure that the frame
* is tried in both MCS and legacy rates.
* If the last rate in the rate series is MCS and has
* more than 80% of per thresh, then use a legacy rate
* as last retry to ensure that the frame is tried in both
* MCS and legacy rate.
*/
if ((rates[2].flags & IEEE80211_TX_RC_MCS) &&
(!(tx_info->flags & IEEE80211_TX_CTL_AMPDU) ||
(ath_rc_priv->per[high_rix] > 45)))
ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &rix);
if (WLAN_RC_PHY_HT(rate_table->info[rix].phy) &&
(ath_rc_priv->per[rix] > 45))
rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table,
&is_probe, true);
else
ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &rix);
/* All other rates in the series have RTS enabled */
ath_rc_rate_set_series(rate_table, &rates[i], txrc,
......
drivers/net/wireless/ath/ath9k/reg.h
浏览文件 @ b3c911ee
......@@ -2098,8 +2098,8 @@ enum {
#define AR_MCI_CONT_STATUS 0x1848
#define AR_MCI_CONT_RSSI_POWER 0x000000FF
#define AR_MCI_CONT_RSSI_POWER_S 0
#define AR_MCI_CONT_RRIORITY 0x0000FF00
#define AR_MCI_CONT_RRIORITY_S 8
#define AR_MCI_CONT_PRIORITY 0x0000FF00
#define AR_MCI_CONT_PRIORITY_S 8
#define AR_MCI_CONT_TXRX 0x00010000
#define AR_MCI_CONT_TXRX_S 16
......
drivers/net/wireless/brcm80211/brcmfmac/Makefile
浏览文件 @ b3c911ee
......@@ -34,3 +34,5 @@ brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
sdio_chip.o
brcmfmac-$(CONFIG_BRCMFMAC_USB) += \
usb.o
brcmfmac-$(CONFIG_BRCMDBG) += \
dhd_dbg.o
\ No newline at end of file
drivers/net/wireless/brcm80211/brcmfmac/dhd.h
浏览文件 @ b3c911ee
......@@ -613,6 +613,9 @@ struct brcmf_pub {
struct work_struct multicast_work;
u8 macvalue[ETH_ALEN];
atomic_t pend_8021x_cnt;
#ifdef DEBUG
struct dentry *dbgfs_dir;
#endif
};
struct brcmf_if_event {
......
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c 0 → 100644
浏览文件 @ b3c911ee
/*
* Copyright (c) 2012 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/debugfs.h>
#include <linux/if_ether.h>
#include <linux/if.h>
#include <linux/ieee80211.h>
#include <linux/module.h>
#include <defs.h>
#include <brcmu_wifi.h>
#include <brcmu_utils.h>
#include "dhd.h"
#include "dhd_bus.h"
#include "dhd_dbg.h"
static struct dentry *root_folder;
void brcmf_debugfs_init(void)
{
root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL);
if (IS_ERR(root_folder))
root_folder = NULL;
}
void brcmf_debugfs_exit(void)
{
if (!root_folder)
return;
debugfs_remove_recursive(root_folder);
root_folder = NULL;
}
int brcmf_debugfs_attach(struct brcmf_pub *drvr)
{
if (!root_folder)
return -ENODEV;
drvr->dbgfs_dir = debugfs_create_dir(dev_name(drvr->dev), root_folder);
return PTR_RET(drvr->dbgfs_dir);
}
void brcmf_debugfs_detach(struct brcmf_pub *drvr)
{
if (!IS_ERR_OR_NULL(drvr->dbgfs_dir))
debugfs_remove_recursive(drvr->dbgfs_dir);
}
struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr)
{
return drvr->dbgfs_dir;
}
static
ssize_t brcmf_debugfs_sdio_counter_read(struct file *f, char __user *data,
size_t count, loff_t *ppos)
{
struct brcmf_sdio_count *sdcnt = f->private_data;
char buf[750];
int res;
/* only allow read from start */
if (*ppos > 0)
return 0;
res = scnprintf(buf, sizeof(buf),
"intrcount: %u\nlastintrs: %u\n"
"pollcnt: %u\nregfails: %u\n"
"tx_sderrs: %u\nfcqueued: %u\n"
"rxrtx: %u\nrx_toolong: %u\n"
"rxc_errors: %u\nrx_hdrfail: %u\n"
"rx_badhdr: %u\nrx_badseq: %u\n"
"fc_rcvd: %u\nfc_xoff: %u\n"
"fc_xon: %u\nrxglomfail: %u\n"
"rxglomframes: %u\nrxglompkts: %u\n"
"f2rxhdrs: %u\nf2rxdata: %u\n"
"f2txdata: %u\nf1regdata: %u\n"
"tickcnt: %u\ntx_ctlerrs: %lu\n"
"tx_ctlpkts: %lu\nrx_ctlerrs: %lu\n"
"rx_ctlpkts: %lu\nrx_readahead: %lu\n",
sdcnt->intrcount, sdcnt->lastintrs,
sdcnt->pollcnt, sdcnt->regfails,
sdcnt->tx_sderrs, sdcnt->fcqueued,
sdcnt->rxrtx, sdcnt->rx_toolong,
sdcnt->rxc_errors, sdcnt->rx_hdrfail,
sdcnt->rx_badhdr, sdcnt->rx_badseq,
sdcnt->fc_rcvd, sdcnt->fc_xoff,
sdcnt->fc_xon, sdcnt->rxglomfail,
sdcnt->rxglomframes, sdcnt->rxglompkts,
sdcnt->f2rxhdrs, sdcnt->f2rxdata,
sdcnt->f2txdata, sdcnt->f1regdata,
sdcnt->tickcnt, sdcnt->tx_ctlerrs,
sdcnt->tx_ctlpkts, sdcnt->rx_ctlerrs,
sdcnt->rx_ctlpkts, sdcnt->rx_readahead_cnt);
return simple_read_from_buffer(data, count, ppos, buf, res);
}
static const struct file_operations brcmf_debugfs_sdio_counter_ops = {
.owner = THIS_MODULE,
.open = simple_open,
.read = brcmf_debugfs_sdio_counter_read
};
void brcmf_debugfs_create_sdio_count(struct brcmf_pub *drvr,
struct brcmf_sdio_count *sdcnt)
{
struct dentry *dentry = drvr->dbgfs_dir;
if (!IS_ERR_OR_NULL(dentry))
debugfs_create_file("counters", S_IRUGO, dentry,
sdcnt, &brcmf_debugfs_sdio_counter_ops);
}
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
浏览文件 @ b3c911ee
......@@ -76,4 +76,63 @@ do { \
extern int brcmf_msg_level;
/*
* hold counter variables used in brcmfmac sdio driver.
*/
struct brcmf_sdio_count {
uint intrcount; /* Count of device interrupt callbacks */
uint lastintrs; /* Count as of last watchdog timer */
uint pollcnt; /* Count of active polls */
uint regfails; /* Count of R_REG failures */
uint tx_sderrs; /* Count of tx attempts with sd errors */
uint fcqueued; /* Tx packets that got queued */
uint rxrtx; /* Count of rtx requests (NAK to dongle) */
uint rx_toolong; /* Receive frames too long to receive */
uint rxc_errors; /* SDIO errors when reading control frames */
uint rx_hdrfail; /* SDIO errors on header reads */
uint rx_badhdr; /* Bad received headers (roosync?) */
uint rx_badseq; /* Mismatched rx sequence number */
uint fc_rcvd; /* Number of flow-control events received */
uint fc_xoff; /* Number which turned on flow-control */
uint fc_xon; /* Number which turned off flow-control */
uint rxglomfail; /* Failed deglom attempts */
uint rxglomframes; /* Number of glom frames (superframes) */
uint rxglompkts; /* Number of packets from glom frames */
uint f2rxhdrs; /* Number of header reads */
uint f2rxdata; /* Number of frame data reads */
uint f2txdata; /* Number of f2 frame writes */
uint f1regdata; /* Number of f1 register accesses */
uint tickcnt; /* Number of watchdog been schedule */
ulong tx_ctlerrs; /* Err of sending ctrl frames */
ulong tx_ctlpkts; /* Ctrl frames sent to dongle */
ulong rx_ctlerrs; /* Err of processing rx ctrl frames */
ulong rx_ctlpkts; /* Ctrl frames processed from dongle */
ulong rx_readahead_cnt; /* packets where header read-ahead was used */
};
struct brcmf_pub;
#ifdef DEBUG
void brcmf_debugfs_init(void);
void brcmf_debugfs_exit(void);
int brcmf_debugfs_attach(struct brcmf_pub *drvr);
void brcmf_debugfs_detach(struct brcmf_pub *drvr);
struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr);
void brcmf_debugfs_create_sdio_count(struct brcmf_pub *drvr,
struct brcmf_sdio_count *sdcnt);
#else
static inline void brcmf_debugfs_init(void)
{
}
static inline void brcmf_debugfs_exit(void)
{
}
static inline int brcmf_debugfs_attach(struct brcmf_pub *drvr)
{
return 0;
}
static inline void brcmf_debugfs_detach(struct brcmf_pub *drvr)
{
}
#endif
#endif /* _BRCMF_DBG_H_ */
drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
浏览文件 @ b3c911ee
......@@ -1007,6 +1007,9 @@ int brcmf_attach(uint bus_hdrlen, struct device *dev)
drvr->bus_if->drvr = drvr;
drvr->dev = dev;
/* create device debugfs folder */
brcmf_debugfs_attach(drvr);
/* Attach and link in the protocol */
ret = brcmf_proto_attach(drvr);
if (ret != 0) {
......@@ -1123,6 +1126,7 @@ void brcmf_detach(struct device *dev)
brcmf_proto_detach(drvr);
}
brcmf_debugfs_detach(drvr);
bus_if->drvr = NULL;
kfree(drvr);
}
......@@ -1192,6 +1196,8 @@ int brcmf_write_to_file(struct brcmf_pub *drvr, const u8 *buf, int size)
static void brcmf_driver_init(struct work_struct *work)
{
brcmf_debugfs_init();
#ifdef CONFIG_BRCMFMAC_SDIO
brcmf_sdio_init();
#endif
......@@ -1219,6 +1225,7 @@ static void __exit brcmfmac_module_exit(void)
#ifdef CONFIG_BRCMFMAC_USB
brcmf_usb_exit();
#endif
brcmf_debugfs_exit();
}
module_init(brcmfmac_module_init);
......
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
浏览文件 @ b3c911ee
......@@ -502,12 +502,9 @@ struct brcmf_sdio {
bool intr; /* Use interrupts */
bool poll; /* Use polling */
bool ipend; /* Device interrupt is pending */
uint intrcount; /* Count of device interrupt callbacks */
uint lastintrs; /* Count as of last watchdog timer */
uint spurious; /* Count of spurious interrupts */
uint pollrate; /* Ticks between device polls */
uint polltick; /* Tick counter */
uint pollcnt; /* Count of active polls */
#ifdef DEBUG
uint console_interval;
......@@ -515,8 +512,6 @@ struct brcmf_sdio {
uint console_addr; /* Console address from shared struct */
#endif /* DEBUG */
uint regfails; /* Count of R_REG failures */
uint clkstate; /* State of sd and backplane clock(s) */
bool activity; /* Activity flag for clock down */
s32 idletime; /* Control for activity timeout */
......@@ -531,33 +526,6 @@ struct brcmf_sdio {
/* Field to decide if rx of control frames happen in rxbuf or lb-pool */
bool usebufpool;
/* Some additional counters */
uint tx_sderrs; /* Count of tx attempts with sd errors */
uint fcqueued; /* Tx packets that got queued */
uint rxrtx; /* Count of rtx requests (NAK to dongle) */
uint rx_toolong; /* Receive frames too long to receive */
uint rxc_errors; /* SDIO errors when reading control frames */
uint rx_hdrfail; /* SDIO errors on header reads */
uint rx_badhdr; /* Bad received headers (roosync?) */
uint rx_badseq; /* Mismatched rx sequence number */
uint fc_rcvd; /* Number of flow-control events received */
uint fc_xoff; /* Number which turned on flow-control */
uint fc_xon; /* Number which turned off flow-control */
uint rxglomfail; /* Failed deglom attempts */
uint rxglomframes; /* Number of glom frames (superframes) */
uint rxglompkts; /* Number of packets from glom frames */
uint f2rxhdrs; /* Number of header reads */
uint f2rxdata; /* Number of frame data reads */
uint f2txdata; /* Number of f2 frame writes */
uint f1regdata; /* Number of f1 register accesses */
uint tickcnt; /* Number of watchdog been schedule */
unsigned long tx_ctlerrs; /* Err of sending ctrl frames */
unsigned long tx_ctlpkts; /* Ctrl frames sent to dongle */
unsigned long rx_ctlerrs; /* Err of processing rx ctrl frames */
unsigned long rx_ctlpkts; /* Ctrl frames processed from dongle */
unsigned long rx_readahead_cnt; /* Number of packets where header
* read-ahead was used. */
u8 *ctrl_frame_buf;
u32 ctrl_frame_len;
bool ctrl_frame_stat;
......@@ -583,6 +551,7 @@ struct brcmf_sdio {
u32 fw_ptr;
bool txoff; /* Transmit flow-controlled */
struct brcmf_sdio_count sdcnt;
};
/* clkstate */
......@@ -945,7 +914,7 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
if (ret == 0)
w_sdreg32(bus, SMB_INT_ACK,
offsetof(struct sdpcmd_regs, tosbmailbox));
bus->f1regdata += 2;
bus->sdcnt.f1regdata += 2;
/* Dongle recomposed rx frames, accept them again */
if (hmb_data & HMB_DATA_NAKHANDLED) {
......@@ -984,12 +953,12 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
HMB_DATA_FCDATA_SHIFT;
if (fcbits & ~bus->flowcontrol)
bus->fc_xoff++;
bus->sdcnt.fc_xoff++;
if (bus->flowcontrol & ~fcbits)
bus->fc_xon++;
bus->sdcnt.fc_xon++;
bus->fc_rcvd++;
bus->sdcnt.fc_rcvd++;
bus->flowcontrol = fcbits;
}
......@@ -1021,7 +990,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
SFC_RF_TERM, &err);
bus->f1regdata++;
bus->sdcnt.f1regdata++;
/* Wait until the packet has been flushed (device/FIFO stable) */
for (lastrbc = retries = 0xffff; retries > 0; retries--) {
......@@ -1029,7 +998,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
SBSDIO_FUNC1_RFRAMEBCHI, &err);
lo = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_RFRAMEBCLO, &err);
bus->f1regdata += 2;
bus->sdcnt.f1regdata += 2;
if ((hi == 0) && (lo == 0))
break;
......@@ -1047,11 +1016,11 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
brcmf_dbg(INFO, "flush took %d iterations\n", 0xffff - retries);
if (rtx) {
bus->rxrtx++;
bus->sdcnt.rxrtx++;
err = w_sdreg32(bus, SMB_NAK,
offsetof(struct sdpcmd_regs, tosbmailbox));
bus->f1regdata++;
bus->sdcnt.f1regdata++;
if (err == 0)
bus->rxskip = true;
}
......@@ -1243,7 +1212,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
dlen);
errcode = -1;
}
bus->f2rxdata++;
bus->sdcnt.f2rxdata++;
/* On failure, kill the superframe, allow a couple retries */
if (errcode < 0) {
......@@ -1256,7 +1225,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
} else {
bus->glomerr = 0;
brcmf_sdbrcm_rxfail(bus, true, false);
bus->rxglomfail++;
bus->sdcnt.rxglomfail++;
brcmf_sdbrcm_free_glom(bus);
}
return 0;
......@@ -1312,7 +1281,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
if (rxseq != seq) {
brcmf_dbg(INFO, "(superframe) rx_seq %d, expected %d\n",
seq, rxseq);
bus->rx_badseq++;
bus->sdcnt.rx_badseq++;
rxseq = seq;
}
......@@ -1376,7 +1345,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
} else {
bus->glomerr = 0;
brcmf_sdbrcm_rxfail(bus, true, false);
bus->rxglomfail++;
bus->sdcnt.rxglomfail++;
brcmf_sdbrcm_free_glom(bus);
}
bus->nextlen = 0;
......@@ -1402,7 +1371,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
if (rxseq != seq) {
brcmf_dbg(GLOM, "rx_seq %d, expected %d\n",
seq, rxseq);
bus->rx_badseq++;
bus->sdcnt.rx_badseq++;
rxseq = seq;
}
rxseq++;
......@@ -1441,8 +1410,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
down(&bus->sdsem);
}
bus->rxglomframes++;
bus->rxglompkts += bus->glom.qlen;
bus->sdcnt.rxglomframes++;
bus->sdcnt.rxglompkts += bus->glom.qlen;
}
return num;
}
......@@ -1526,7 +1495,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
brcmf_dbg(ERROR, "%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
len, len - doff, bus->sdiodev->bus_if->maxctl);
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->rx_toolong++;
bus->sdcnt.rx_toolong++;
brcmf_sdbrcm_rxfail(bus, false, false);
goto done;
}
......@@ -1536,13 +1505,13 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
bus->sdiodev->sbwad,
SDIO_FUNC_2,
F2SYNC, (bus->rxctl + BRCMF_FIRSTREAD), rdlen);
bus->f2rxdata++;
bus->sdcnt.f2rxdata++;
/* Control frame failures need retransmission */
if (sdret < 0) {
brcmf_dbg(ERROR, "read %d control bytes failed: %d\n",
rdlen, sdret);
bus->rxc_errors++;
bus->sdcnt.rxc_errors++;
brcmf_sdbrcm_rxfail(bus, true, true);
goto done;
}
......@@ -1589,7 +1558,7 @@ brcmf_alloc_pkt_and_read(struct brcmf_sdio *bus, u16 rdlen,
/* Read the entire frame */
sdret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, *pkt);
bus->f2rxdata++;
bus->sdcnt.f2rxdata++;
if (sdret < 0) {
brcmf_dbg(ERROR, "(nextlen): read %d bytes failed: %d\n",
......@@ -1630,7 +1599,7 @@ brcmf_check_rxbuf(struct brcmf_sdio *bus, struct sk_buff *pkt, u8 *rxbuf,
if ((u16)~(*len ^ check)) {
brcmf_dbg(ERROR, "(nextlen): HW hdr error: nextlen/len/check 0x%04x/0x%04x/0x%04x\n",
nextlen, *len, check);
bus->rx_badhdr++;
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
goto fail;
}
......@@ -1746,7 +1715,7 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
bus->nextlen = 0;
}
bus->rx_readahead_cnt++;
bus->sdcnt.rx_readahead_cnt++;
/* Handle Flow Control */
fcbits = SDPCM_FCMASK_VALUE(
......@@ -1754,12 +1723,12 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
if (bus->flowcontrol != fcbits) {
if (~bus->flowcontrol & fcbits)
bus->fc_xoff++;
bus->sdcnt.fc_xoff++;
if (bus->flowcontrol & ~fcbits)
bus->fc_xon++;
bus->sdcnt.fc_xon++;
bus->fc_rcvd++;
bus->sdcnt.fc_rcvd++;
bus->flowcontrol = fcbits;
}
......@@ -1767,7 +1736,7 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
if (rxseq != seq) {
brcmf_dbg(INFO, "(nextlen): rx_seq %d, expected %d\n",
seq, rxseq);
bus->rx_badseq++;
bus->sdcnt.rx_badseq++;
rxseq = seq;
}
......@@ -1814,11 +1783,11 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, bus->rxhdr,
BRCMF_FIRSTREAD);
bus->f2rxhdrs++;
bus->sdcnt.f2rxhdrs++;
if (sdret < 0) {
brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n", sdret);
bus->rx_hdrfail++;
bus->sdcnt.rx_hdrfail++;
brcmf_sdbrcm_rxfail(bus, true, true);
continue;
}
......@@ -1840,7 +1809,7 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
if ((u16) ~(len ^ check)) {
brcmf_dbg(ERROR, "HW hdr err: len/check 0x%04x/0x%04x\n",
len, check);
bus->rx_badhdr++;
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
continue;
}
......@@ -1861,7 +1830,7 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
if ((doff < SDPCM_HDRLEN) || (doff > len)) {
brcmf_dbg(ERROR, "Bad data offset %d: HW len %d, min %d seq %d\n",
doff, len, SDPCM_HDRLEN, seq);
bus->rx_badhdr++;
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
continue;
}
......@@ -1880,19 +1849,19 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
if (bus->flowcontrol != fcbits) {
if (~bus->flowcontrol & fcbits)
bus->fc_xoff++;
bus->sdcnt.fc_xoff++;
if (bus->flowcontrol & ~fcbits)
bus->fc_xon++;
bus->sdcnt.fc_xon++;
bus->fc_rcvd++;
bus->sdcnt.fc_rcvd++;
bus->flowcontrol = fcbits;
}
/* Check and update sequence number */
if (rxseq != seq) {
brcmf_dbg(INFO, "rx_seq %d, expected %d\n", seq, rxseq);
bus->rx_badseq++;
bus->sdcnt.rx_badseq++;
rxseq = seq;
}
......@@ -1937,7 +1906,7 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
brcmf_dbg(ERROR, "too long: len %d rdlen %d\n",
len, rdlen);
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->rx_toolong++;
bus->sdcnt.rx_toolong++;
brcmf_sdbrcm_rxfail(bus, false, false);
continue;
}
......@@ -1960,7 +1929,7 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
/* Read the remaining frame data */
sdret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, pkt);
bus->f2rxdata++;
bus->sdcnt.f2rxdata++;
if (sdret < 0) {
brcmf_dbg(ERROR, "read %d %s bytes failed: %d\n", rdlen,
......@@ -2147,18 +2116,18 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, pkt);
bus->f2txdata++;
bus->sdcnt.f2txdata++;
if (ret < 0) {
/* On failure, abort the command and terminate the frame */
brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
ret);
bus->tx_sderrs++;
bus->sdcnt.tx_sderrs++;
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
SFC_WF_TERM, NULL);
bus->f1regdata++;
bus->sdcnt.f1regdata++;
for (i = 0; i < 3; i++) {
u8 hi, lo;
......@@ -2166,7 +2135,7 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
SBSDIO_FUNC1_WFRAMEBCHI, NULL);
lo = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_WFRAMEBCLO, NULL);
bus->f1regdata += 2;
bus->sdcnt.f1regdata += 2;
if ((hi == 0) && (lo == 0))
break;
}
......@@ -2224,7 +2193,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
ret = r_sdreg32(bus, &intstatus,
offsetof(struct sdpcmd_regs,
intstatus));
bus->f2txdata++;
bus->sdcnt.f2txdata++;
if (ret != 0)
break;
if (intstatus & bus->hostintmask)
......@@ -2417,7 +2386,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
bus->ipend = false;
err = r_sdreg32(bus, &newstatus,
offsetof(struct sdpcmd_regs, intstatus));
bus->f1regdata++;
bus->sdcnt.f1regdata++;
if (err != 0)
newstatus = 0;
newstatus &= bus->hostintmask;
......@@ -2426,7 +2395,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
err = w_sdreg32(bus, newstatus,
offsetof(struct sdpcmd_regs,
intstatus));
bus->f1regdata++;
bus->sdcnt.f1regdata++;
}
}
......@@ -2445,7 +2414,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
err = r_sdreg32(bus, &newstatus,
offsetof(struct sdpcmd_regs, intstatus));
bus->f1regdata += 2;
bus->sdcnt.f1regdata += 2;
bus->fcstate =
!!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE));
intstatus |= (newstatus & bus->hostintmask);
......@@ -2510,13 +2479,13 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
terminate the frame */
brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
ret);
bus->tx_sderrs++;
bus->sdcnt.tx_sderrs++;
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
SFC_WF_TERM, &err);
bus->f1regdata++;
bus->sdcnt.f1regdata++;
for (i = 0; i < 3; i++) {
u8 hi, lo;
......@@ -2526,7 +2495,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
lo = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_WFRAMEBCLO,
&err);
bus->f1regdata += 2;
bus->sdcnt.f1regdata += 2;
if ((hi == 0) && (lo == 0))
break;
}
......@@ -2657,7 +2626,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
/* Check for existing queue, current flow-control,
pending event, or pending clock */
brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));
bus->fcqueued++;
bus->sdcnt.fcqueued++;
/* Priority based enq */
spin_lock_bh(&bus->txqlock);
......@@ -2845,13 +2814,13 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
/* On failure, abort the command and terminate the frame */
brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
ret);
bus->tx_sderrs++;
bus->sdcnt.tx_sderrs++;
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
SFC_WF_TERM, NULL);
bus->f1regdata++;
bus->sdcnt.f1regdata++;
for (i = 0; i < 3; i++) {
u8 hi, lo;
......@@ -2859,7 +2828,7 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
SBSDIO_FUNC1_WFRAMEBCHI, NULL);
lo = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_WFRAMEBCLO, NULL);
bus->f1regdata += 2;
bus->sdcnt.f1regdata += 2;
if (hi == 0 && lo == 0)
break;
}
......@@ -2976,13 +2945,26 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
up(&bus->sdsem);
if (ret)
bus->tx_ctlerrs++;
bus->sdcnt.tx_ctlerrs++;
else
bus->tx_ctlpkts++;
bus->sdcnt.tx_ctlpkts++;
return ret ? -EIO : 0;
}
#ifdef DEBUG
static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
{
struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr;
brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt);
}
#else
static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
{
}
#endif /* DEBUG */
static int
brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
{
......@@ -3017,9 +2999,9 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
}
if (rxlen)
bus->rx_ctlpkts++;
bus->sdcnt.rx_ctlpkts++;
else
bus->rx_ctlerrs++;
bus->sdcnt.rx_ctlerrs++;
return rxlen ? (int)rxlen : -ETIMEDOUT;
}
......@@ -3419,7 +3401,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
return 0;
/* Start the watchdog timer */
bus->tickcnt = 0;
bus->sdcnt.tickcnt = 0;
brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
down(&bus->sdsem);
......@@ -3512,7 +3494,7 @@ void brcmf_sdbrcm_isr(void *arg)
return;
}
/* Count the interrupt call */
bus->intrcount++;
bus->sdcnt.intrcount++;
bus->ipend = true;
/* Shouldn't get this interrupt if we're sleeping? */
......@@ -3554,7 +3536,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
bus->polltick = 0;
/* Check device if no interrupts */
if (!bus->intr || (bus->intrcount == bus->lastintrs)) {
if (!bus->intr ||
(bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
if (!bus->dpc_sched) {
u8 devpend;
......@@ -3569,7 +3552,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
/* If there is something, make like the ISR and
schedule the DPC */
if (intstatus) {
bus->pollcnt++;
bus->sdcnt.pollcnt++;
bus->ipend = true;
bus->dpc_sched = true;
......@@ -3581,7 +3564,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
}
/* Update interrupt tracking */
bus->lastintrs = bus->intrcount;
bus->sdcnt.lastintrs = bus->sdcnt.intrcount;
}
#ifdef DEBUG
/* Poll for console output periodically */
......@@ -3793,7 +3776,7 @@ brcmf_sdbrcm_watchdog_thread(void *data)
if (!wait_for_completion_interruptible(&bus->watchdog_wait)) {
brcmf_sdbrcm_bus_watchdog(bus);
/* Count the tick for reference */
bus->tickcnt++;
bus->sdcnt.tickcnt++;
} else
break;
}
......@@ -3834,7 +3817,6 @@ static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus)
static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
{
brcmf_dbg(TRACE, "Enter\n");
if (bus) {
/* De-register interrupt handler */
brcmf_sdio_intr_unregister(bus->sdiodev);
......@@ -3938,6 +3920,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
goto fail;
}
brcmf_sdio_debugfs_create(bus);
brcmf_dbg(INFO, "completed!!\n");
/* if firmware path present try to download and bring up bus */
......
drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
浏览文件 @ b3c911ee
......@@ -735,10 +735,8 @@ brcms_c_sendampdu(struct ampdu_info *ampdu, struct brcms_txq_info *qi,
* a candidate for aggregation
*/
p = pktq_ppeek(&qi->q, prec);
/* tx_info must be checked with current p */
tx_info = IEEE80211_SKB_CB(p);
if (p) {
tx_info = IEEE80211_SKB_CB(p);
if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) &&
((u8) (p->priority) == tid)) {
plen = p->len + AMPDU_MAX_MPDU_OVERHEAD;
......@@ -759,6 +757,7 @@ brcms_c_sendampdu(struct ampdu_info *ampdu, struct brcms_txq_info *qi,
p = NULL;
continue;
}
/* next packet fit for aggregation so dequeue */
p = brcmu_pktq_pdeq(&qi->q, prec);
} else {
p = NULL;
......
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
浏览文件 @ b3c911ee
......@@ -721,14 +721,6 @@ static const struct ieee80211_ops brcms_ops = {
.flush = brcms_ops_flush,
};
/*
* is called in brcms_bcma_probe() context, therefore no locking required.
*/
static int brcms_set_hint(struct brcms_info *wl, char *abbrev)
{
return regulatory_hint(wl->pub->ieee_hw->wiphy, abbrev);
}
void brcms_dpc(unsigned long data)
{
struct brcms_info *wl;
......@@ -1068,9 +1060,9 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev)
wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
"%d\n", __func__, err);
if (wl->pub->srom_ccode[0] && brcms_set_hint(wl, wl->pub->srom_ccode))
wiphy_err(wl->wiphy, "%s: regulatory_hint failed, status %d\n",
__func__, err);
if (wl->pub->srom_ccode[0] &&
regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
n_adapters_found++;
return wl;
......
drivers/net/wireless/iwlwifi/Makefile
浏览文件 @ b3c911ee
obj-$(CONFIG_IWLDVM) += dvm/
CFLAGS_iwl-devtrace.o := -I$(src)
# common
obj-$(CONFIG_IWLWIFI) += iwlwifi.o
iwlwifi-objs += iwl-io.o
......@@ -13,5 +9,11 @@ iwlwifi-objs += pcie/drv.o pcie/rx.o pcie/tx.o pcie/trans.o
iwlwifi-objs += pcie/1000.o pcie/2000.o pcie/5000.o pcie/6000.o
iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += iwl-test.o
ccflags-y += -D__CHECK_ENDIAN__ -I$(src)
obj-$(CONFIG_IWLDVM) += dvm/
CFLAGS_iwl-devtrace.o := -I$(src)
drivers/net/wireless/iwlwifi/dvm/agn.h
浏览文件 @ b3c911ee
......@@ -395,8 +395,10 @@ static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags)
}
extern int iwl_alive_start(struct iwl_priv *priv);
/* svtool */
/* testmode support */
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
extern int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data,
int len);
extern int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw,
......@@ -404,13 +406,16 @@ extern int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw,
struct netlink_callback *cb,
void *data, int len);
extern void iwl_testmode_init(struct iwl_priv *priv);
extern void iwl_testmode_cleanup(struct iwl_priv *priv);
extern void iwl_testmode_free(struct iwl_priv *priv);
#else
static inline
int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
{
return -ENOSYS;
}
static inline
int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb,
struct netlink_callback *cb,
......@@ -418,12 +423,12 @@ int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb,
{
return -ENOSYS;
}
static inline
void iwl_testmode_init(struct iwl_priv *priv)
static inline void iwl_testmode_init(struct iwl_priv *priv)
{
}
static inline
void iwl_testmode_cleanup(struct iwl_priv *priv)
static inline void iwl_testmode_free(struct iwl_priv *priv)
{
}
#endif
......
drivers/net/wireless/iwlwifi/dvm/dev.h
浏览文件 @ b3c911ee
......@@ -52,6 +52,8 @@
#include "rs.h"
#include "tt.h"
#include "iwl-test.h"
/* CT-KILL constants */
#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
#define CT_KILL_THRESHOLD 114 /* in Celsius */
......@@ -596,24 +598,6 @@ struct iwl_lib_ops {
void (*temperature)(struct iwl_priv *priv);
};
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
struct iwl_testmode_trace {
u32 buff_size;
u32 total_size;
u32 num_chunks;
u8 *cpu_addr;
u8 *trace_addr;
dma_addr_t dma_addr;
bool trace_enabled;
};
struct iwl_testmode_mem {
u32 buff_size;
u32 num_chunks;
u8 *buff_addr;
bool read_in_progress;
};
#endif
struct iwl_wipan_noa_data {
struct rcu_head rcu_head;
u32 length;
......@@ -670,8 +654,6 @@ struct iwl_priv {
enum ieee80211_band band;
u8 valid_contexts;
void (*pre_rx_handler)(struct iwl_priv *priv,
struct iwl_rx_cmd_buffer *rxb);
int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd);
......@@ -895,9 +877,9 @@ struct iwl_priv {
struct led_classdev led;
unsigned long blink_on, blink_off;
bool led_registered;
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
struct iwl_testmode_trace testmode_trace;
struct iwl_testmode_mem testmode_mem;
struct iwl_test tst;
u32 tm_fixed_rate;
#endif
......
drivers/net/wireless/iwlwifi/dvm/lib.c
浏览文件 @ b3c911ee
......@@ -1265,7 +1265,7 @@ int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
* the mutex, this ensures we don't try to send two
* (or more) synchronous commands at a time.
*/
if (cmd->flags & CMD_SYNC)
if (!(cmd->flags & CMD_ASYNC))
lockdep_assert_held(&priv->mutex);
if (priv->ucode_owner == IWL_OWNERSHIP_TM &&
......
drivers/net/wireless/iwlwifi/dvm/mac80211.c
浏览文件 @ b3c911ee
......@@ -476,7 +476,7 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw)
}
if (priv->wowlan_sram)
_iwl_read_targ_mem_words(
_iwl_read_targ_mem_dwords(
priv->trans, 0x800000,
priv->wowlan_sram,
img->sec[IWL_UCODE_SECTION_DATA].len / 4);
......
drivers/net/wireless/iwlwifi/dvm/main.c
浏览文件 @ b3c911ee
......@@ -406,7 +406,7 @@ static void iwl_continuous_event_trace(struct iwl_priv *priv)
base = priv->device_pointers.log_event_table;
if (iwlagn_hw_valid_rtc_data_addr(base)) {
iwl_read_targ_mem_words(priv->trans, base, &read, sizeof(read));
iwl_read_targ_mem_bytes(priv->trans, base, &read, sizeof(read));
capacity = read.capacity;
mode = read.mode;
num_wraps = read.wrap_counter;
......@@ -1548,7 +1548,7 @@ static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
iwl_dbgfs_unregister(priv);
iwl_testmode_cleanup(priv);
iwl_testmode_free(priv);
iwlagn_mac_unregister(priv);
iwl_tt_exit(priv);
......@@ -1671,7 +1671,7 @@ static void iwl_dump_nic_error_log(struct iwl_priv *priv)
}
/*TODO: Update dbgfs with ISR error stats obtained below */
iwl_read_targ_mem_words(trans, base, &table, sizeof(table));
iwl_read_targ_mem_bytes(trans, base, &table, sizeof(table));
if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
IWL_ERR(trans, "Start IWL Error Log Dump:\n");
......
drivers/net/wireless/iwlwifi/dvm/rx.c
浏览文件 @ b3c911ee
......@@ -1124,8 +1124,6 @@ int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb,
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
void (*pre_rx_handler)(struct iwl_priv *,
struct iwl_rx_cmd_buffer *);
int err = 0;
/*
......@@ -1135,19 +1133,19 @@ int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb,
*/
iwl_notification_wait_notify(&priv->notif_wait, pkt);
/* RX data may be forwarded to userspace (using pre_rx_handler) in one
* of two cases: the first, that the user owns the uCode through
* testmode - in such case the pre_rx_handler is set and no further
* processing takes place. The other case is when the user want to
* monitor the rx w/o affecting the regular flow - the pre_rx_handler
* will be set but the ownership flag != IWL_OWNERSHIP_TM and the flow
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
/*
* RX data may be forwarded to userspace in one
* of two cases: the user owns the fw through testmode or when
* the user requested to monitor the rx w/o affecting the regular flow.
* In these cases the iwl_test object will handle forwarding the rx
* data to user space.
* Note that if the ownership flag != IWL_OWNERSHIP_TM the flow
* continues.
* We need to use ACCESS_ONCE to prevent a case where the handler
* changes between the check and the call.
*/
pre_rx_handler = ACCESS_ONCE(priv->pre_rx_handler);
if (pre_rx_handler)
pre_rx_handler(priv, rxb);
iwl_test_rx(&priv->tst, rxb);
#endif
if (priv->ucode_owner != IWL_OWNERSHIP_TM) {
/* Based on type of command response or notification,
* handle those that need handling via function in
......
drivers/net/wireless/iwlwifi/dvm/tx.c
浏览文件 @ b3c911ee
......@@ -403,6 +403,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
info->driver_data[0] = ctx;
info->driver_data[1] = dev_cmd;
/* From now on, we cannot access info->control */
spin_lock(&priv->sta_lock);
......@@ -1182,7 +1183,8 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
}
/*we can free until ssn % q.n_bd not inclusive */
WARN_ON(iwl_reclaim(priv, sta_id, tid, txq_id, ssn, &skbs));
WARN_ON_ONCE(iwl_reclaim(priv, sta_id, tid,
txq_id, ssn, &skbs));
iwlagn_check_ratid_empty(priv, sta_id, tid);
freed = 0;
......
drivers/net/wireless/iwlwifi/iwl-drv.c
浏览文件 @ b3c911ee
......@@ -131,6 +131,8 @@ struct iwl_drv {
#define DVM_OP_MODE 0
#define MVM_OP_MODE 1
/* Protects the table contents, i.e. the ops pointer & drv list */
static struct mutex iwlwifi_opmode_table_mtx;
static struct iwlwifi_opmode_table {
const char *name; /* name: iwldvm, iwlmvm, etc */
const struct iwl_op_mode_ops *ops; /* pointer to op_mode ops */
......@@ -776,6 +778,7 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
const unsigned int api_min = drv->cfg->ucode_api_min;
u32 api_ver;
int i;
bool load_module = false;
fw->ucode_capa.max_probe_length = 200;
fw->ucode_capa.standard_phy_calibration_size =
......@@ -898,6 +901,7 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
mutex_lock(&iwlwifi_opmode_table_mtx);
op = &iwlwifi_opmode_table[DVM_OP_MODE];
/* add this device to the list of devices using this op_mode */
......@@ -907,11 +911,14 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
const struct iwl_op_mode_ops *ops = op->ops;
drv->op_mode = ops->start(drv->trans, drv->cfg, &drv->fw);
if (!drv->op_mode)
if (!drv->op_mode) {
mutex_unlock(&iwlwifi_opmode_table_mtx);
goto out_unbind;
}
} else {
request_module_nowait("%s", op->name);
load_module = true;
}
mutex_unlock(&iwlwifi_opmode_table_mtx);
/*
* Complete the firmware request last so that
......@@ -919,6 +926,14 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
* are doing the start() above.
*/
complete(&drv->request_firmware_complete);
/*
* Load the module last so we don't block anything
* else from proceeding if the module fails to load
* or hangs loading.
*/
if (load_module)
request_module("%s", op->name);
return;
try_again:
......@@ -952,6 +967,7 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans,
drv->cfg = cfg;
init_completion(&drv->request_firmware_complete);
INIT_LIST_HEAD(&drv->list);
ret = iwl_request_firmware(drv, true);
......@@ -974,6 +990,16 @@ void iwl_drv_stop(struct iwl_drv *drv)
iwl_dealloc_ucode(drv);
mutex_lock(&iwlwifi_opmode_table_mtx);
/*
* List is empty (this item wasn't added)
* when firmware loading failed -- in that
* case we can't remove it from any list.
*/
if (!list_empty(&drv->list))
list_del(&drv->list);
mutex_unlock(&iwlwifi_opmode_table_mtx);
kfree(drv);
}
......@@ -996,6 +1022,7 @@ int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops)
int i;
struct iwl_drv *drv;
mutex_lock(&iwlwifi_opmode_table_mtx);
for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) {
if (strcmp(iwlwifi_opmode_table[i].name, name))
continue;
......@@ -1003,8 +1030,10 @@ int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops)
list_for_each_entry(drv, &iwlwifi_opmode_table[i].drv, list)
drv->op_mode = ops->start(drv->trans, drv->cfg,
&drv->fw);
mutex_unlock(&iwlwifi_opmode_table_mtx);
return 0;
}
mutex_unlock(&iwlwifi_opmode_table_mtx);
return -EIO;
}
EXPORT_SYMBOL_GPL(iwl_opmode_register);
......@@ -1014,6 +1043,7 @@ void iwl_opmode_deregister(const char *name)
int i;
struct iwl_drv *drv;
mutex_lock(&iwlwifi_opmode_table_mtx);
for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) {
if (strcmp(iwlwifi_opmode_table[i].name, name))
continue;
......@@ -1026,8 +1056,10 @@ void iwl_opmode_deregister(const char *name)
drv->op_mode = NULL;
}
}
mutex_unlock(&iwlwifi_opmode_table_mtx);
return;
}
mutex_unlock(&iwlwifi_opmode_table_mtx);
}
EXPORT_SYMBOL_GPL(iwl_opmode_deregister);
......@@ -1035,6 +1067,8 @@ static int __init iwl_drv_init(void)
{
int i;
mutex_init(&iwlwifi_opmode_table_mtx);
for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++)
INIT_LIST_HEAD(&iwlwifi_opmode_table[i].drv);
......
drivers/net/wireless/iwlwifi/iwl-fh.h
浏览文件 @ b3c911ee
......@@ -421,6 +421,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl)
(FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)
#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98)
#define FH_TX_TRB_REG(_chan) (FH_MEM_LOWER_BOUND + 0x958 + (_chan) * 4)
/* Instruct FH to increment the retry count of a packet when
* it is brought from the memory to TX-FIFO
*/
......
drivers/net/wireless/iwlwifi/iwl-io.c
浏览文件 @ b3c911ee
......@@ -298,8 +298,8 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 reg, u32 mask)
}
EXPORT_SYMBOL_GPL(iwl_clear_bits_prph);
void _iwl_read_targ_mem_words(struct iwl_trans *trans, u32 addr,
void *buf, int words)
void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr,
void *buf, int dwords)
{
unsigned long flags;
int offs;
......@@ -308,26 +308,26 @@ void _iwl_read_targ_mem_words(struct iwl_trans *trans, u32 addr,
spin_lock_irqsave(&trans->reg_lock, flags);
if (likely(iwl_grab_nic_access(trans))) {
iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr);
for (offs = 0; offs < words; offs++)
for (offs = 0; offs < dwords; offs++)
vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
iwl_release_nic_access(trans);
}
spin_unlock_irqrestore(&trans->reg_lock, flags);
}
EXPORT_SYMBOL_GPL(_iwl_read_targ_mem_words);
EXPORT_SYMBOL_GPL(_iwl_read_targ_mem_dwords);
u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr)
{
u32 value;
_iwl_read_targ_mem_words(trans, addr, &value, 1);
_iwl_read_targ_mem_dwords(trans, addr, &value, 1);
return value;
}
EXPORT_SYMBOL_GPL(iwl_read_targ_mem);
int _iwl_write_targ_mem_words(struct iwl_trans *trans, u32 addr,
void *buf, int words)
int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr,
void *buf, int dwords)
{
unsigned long flags;
int offs, result = 0;
......@@ -336,7 +336,7 @@ int _iwl_write_targ_mem_words(struct iwl_trans *trans, u32 addr,
spin_lock_irqsave(&trans->reg_lock, flags);
if (likely(iwl_grab_nic_access(trans))) {
iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr);
for (offs = 0; offs < words; offs++)
for (offs = 0; offs < dwords; offs++)
iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]);
iwl_release_nic_access(trans);
} else
......@@ -345,10 +345,10 @@ int _iwl_write_targ_mem_words(struct iwl_trans *trans, u32 addr,
return result;
}
EXPORT_SYMBOL_GPL(_iwl_write_targ_mem_words);
EXPORT_SYMBOL_GPL(_iwl_write_targ_mem_dwords);
int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val)
{
return _iwl_write_targ_mem_words(trans, addr, &val, 1);
return _iwl_write_targ_mem_dwords(trans, addr, &val, 1);
}
EXPORT_SYMBOL_GPL(iwl_write_targ_mem);
drivers/net/wireless/iwlwifi/iwl-io.h
浏览文件 @ b3c911ee
......@@ -76,18 +76,18 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 reg,
u32 bits, u32 mask);
void iwl_clear_bits_prph(struct iwl_trans *trans, u32 reg, u32 mask);
void _iwl_read_targ_mem_words(struct iwl_trans *trans, u32 addr,
void *buf, int words);
void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr,
void *buf, int dwords);
#define iwl_read_targ_mem_words(trans, addr, buf, bufsize) \
#define iwl_read_targ_mem_bytes(trans, addr, buf, bufsize) \
do { \
BUILD_BUG_ON((bufsize) % sizeof(u32)); \
_iwl_read_targ_mem_words(trans, addr, buf, \
(bufsize) / sizeof(u32));\
_iwl_read_targ_mem_dwords(trans, addr, buf, \
(bufsize) / sizeof(u32));\
} while (0)
int _iwl_write_targ_mem_words(struct iwl_trans *trans, u32 addr,
void *buf, int words);
int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr,
void *buf, int dwords);
u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr);
int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val);
......
drivers/net/wireless/iwlwifi/iwl-test.c 0 → 100644
浏览文件 @ b3c911ee
此差异已折叠。
drivers/net/wireless/iwlwifi/iwl-test.h 0 → 100644
浏览文件 @ b3c911ee
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __IWL_TEST_H__
#define __IWL_TEST_H__
#include <linux/types.h>
#include "iwl-trans.h"
struct iwl_test_trace {
u32 size;
u32 tsize;
u32 nchunks;
u8 *cpu_addr;
u8 *trace_addr;
dma_addr_t dma_addr;
bool enabled;
};
struct iwl_test_mem {
u32 size;
u32 nchunks;
u8 *addr;
bool in_read;
};
/*
* struct iwl_test_ops: callback to the op mode
*
* The structure defines the callbacks that the op_mode should handle,
* inorder to handle logic that is out of the scope of iwl_test. The
* op_mode must set all the callbacks.
* @send_cmd: handler that is used by the test object to request the
* op_mode to send a command to the fw.
*
* @valid_hw_addr: handler that is used by the test object to request the
* op_mode to check if the given address is a valid address.
*
* @get_fw_ver: handler used to get the FW version.
*
* @alloc_reply: handler used by the test object to request the op_mode
* to allocate an skb for sending a reply to the user, and initialize
* the skb. It is assumed that the test object only fills the required
* attributes.
*
* @reply: handler used by the test object to request the op_mode to reply
* to a request. The skb is an skb previously allocated by the the
* alloc_reply callback.
I
* @alloc_event: handler used by the test object to request the op_mode
* to allocate an skb for sending an event, and initialize
* the skb. It is assumed that the test object only fills the required
* attributes.
*
* @reply: handler used by the test object to request the op_mode to send
* an event. The skb is an skb previously allocated by the the
* alloc_event callback.
*/
struct iwl_test_ops {
int (*send_cmd)(struct iwl_op_mode *op_modes,
struct iwl_host_cmd *cmd);
bool (*valid_hw_addr)(u32 addr);
u32 (*get_fw_ver)(struct iwl_op_mode *op_mode);
struct sk_buff *(*alloc_reply)(struct iwl_op_mode *op_mode, int len);
int (*reply)(struct iwl_op_mode *op_mode, struct sk_buff *skb);
struct sk_buff* (*alloc_event)(struct iwl_op_mode *op_mode, int len);
void (*event)(struct iwl_op_mode *op_mode, struct sk_buff *skb);
};
struct iwl_test {
struct iwl_trans *trans;
struct iwl_test_ops *ops;
struct iwl_test_trace trace;
struct iwl_test_mem mem;
bool notify;
};
void iwl_test_init(struct iwl_test *tst, struct iwl_trans *trans,
struct iwl_test_ops *ops);
void iwl_test_free(struct iwl_test *tst);
int iwl_test_parse(struct iwl_test *tst, struct nlattr **tb,
void *data, int len);
int iwl_test_handle_cmd(struct iwl_test *tst, struct nlattr **tb);
int iwl_test_dump(struct iwl_test *tst, u32 cmd, struct sk_buff *skb,
struct netlink_callback *cb);
void iwl_test_rx(struct iwl_test *tst, struct iwl_rx_cmd_buffer *rxb);
static inline void iwl_test_enable_notifications(struct iwl_test *tst,
bool enable)
{
tst->notify = enable;
}
#endif
drivers/net/wireless/iwlwifi/pcie/6000.c
浏览文件 @ b3c911ee
......@@ -258,6 +258,7 @@ const struct iwl_cfg iwl6030_2bg_cfg = {
.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE, \
.adv_pm = true
......
drivers/net/wireless/iwlwifi/pcie/internal.h
浏览文件 @ b3c911ee
......@@ -339,16 +339,9 @@ void iwl_tx_cmd_complete(struct iwl_trans *trans,
void iwl_trans_txq_update_byte_cnt_tbl(struct iwl_trans *trans,
struct iwl_tx_queue *txq,
u16 byte_cnt);
void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int queue);
void iwl_trans_set_wr_ptrs(struct iwl_trans *trans, int txq_id, u32 index);
void iwl_trans_tx_queue_set_status(struct iwl_trans *trans,
struct iwl_tx_queue *txq,
int tx_fifo_id, bool active);
void __iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id,
int fifo, int sta_id, int tid,
int frame_limit, u16 ssn);
void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
int sta_id, int tid, int frame_limit, u16 ssn);
void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int queue);
void iwl_txq_free_tfd(struct iwl_trans *trans, struct iwl_tx_queue *txq,
enum dma_data_direction dma_dir);
int iwl_tx_queue_reclaim(struct iwl_trans *trans, int txq_id, int index,
......
drivers/net/wireless/iwlwifi/pcie/trans.c
浏览文件 @ b3c911ee
......@@ -298,6 +298,10 @@ static void iwl_trans_pcie_queue_stuck_timer(unsigned long data)
struct iwl_tx_queue *txq = (void *)data;
struct iwl_trans_pcie *trans_pcie = txq->trans_pcie;
struct iwl_trans *trans = iwl_trans_pcie_get_trans(trans_pcie);
u32 scd_sram_addr = trans_pcie->scd_base_addr +
SCD_TX_STTS_MEM_LOWER_BOUND + (16 * txq->q.id);
u8 buf[16];
int i;
spin_lock(&txq->lock);
/* check if triggered erroneously */
......@@ -307,15 +311,40 @@ static void iwl_trans_pcie_queue_stuck_timer(unsigned long data)
}
spin_unlock(&txq->lock);
IWL_ERR(trans, "Queue %d stuck for %u ms.\n", txq->q.id,
jiffies_to_msecs(trans_pcie->wd_timeout));
IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n",
txq->q.read_ptr, txq->q.write_ptr);
IWL_ERR(trans, "Current HW read_ptr %d write_ptr %d\n",
iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq->q.id))
& (TFD_QUEUE_SIZE_MAX - 1),
iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq->q.id)));
iwl_read_targ_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf));
iwl_print_hex_error(trans, buf, sizeof(buf));
for (i = 0; i < FH_TCSR_CHNL_NUM; i++)
IWL_ERR(trans, "FH TRBs(%d) = 0x%08x\n", i,
iwl_read_direct32(trans, FH_TX_TRB_REG(i)));
for (i = 0; i < trans->cfg->base_params->num_of_queues; i++) {
u32 status = iwl_read_prph(trans, SCD_QUEUE_STATUS_BITS(i));
u8 fifo = (status >> SCD_QUEUE_STTS_REG_POS_TXF) & 0x7;
bool active = !!(status & BIT(SCD_QUEUE_STTS_REG_POS_ACTIVE));
u32 tbl_dw =
iwl_read_targ_mem(trans,
trans_pcie->scd_base_addr +
SCD_TRANS_TBL_OFFSET_QUEUE(i));
if (i & 0x1)
tbl_dw = (tbl_dw & 0xFFFF0000) >> 16;
else
tbl_dw = tbl_dw & 0x0000FFFF;
IWL_ERR(trans,
"Q %d is %sactive and mapped to fifo %d ra_tid 0x%04x [%d,%d]\n",
i, active ? "" : "in", fifo, tbl_dw,
iwl_read_prph(trans,
SCD_QUEUE_RDPTR(i)) & (txq->q.n_bd - 1),
iwl_read_prph(trans, SCD_QUEUE_WRPTR(i)));
}
iwl_op_mode_nic_error(trans->op_mode);
}
......@@ -1054,23 +1083,21 @@ static void iwl_tx_start(struct iwl_trans *trans)
iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
trans_pcie->scd_bc_tbls.dma >> 10);
/* The chain extension of the SCD doesn't work well. This feature is
* enabled by default by the HW, so we need to disable it manually.
*/
iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
for (i = 0; i < trans_pcie->n_q_to_fifo; i++) {
int fifo = trans_pcie->setup_q_to_fifo[i];
__iwl_trans_pcie_txq_enable(trans, i, fifo, IWL_INVALID_STATION,
IWL_TID_NON_QOS,
SCD_FRAME_LIMIT, 0);
iwl_trans_pcie_txq_enable(trans, i, fifo, IWL_INVALID_STATION,
IWL_TID_NON_QOS, SCD_FRAME_LIMIT, 0);
}
/* Activate all Tx DMA/FIFO channels */
iwl_trans_txq_set_sched(trans, IWL_MASK(0, 7));
/* The chain extension of the SCD doesn't work well. This feature is
* enabled by default by the HW, so we need to disable it manually.
*/
iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
/* Enable DMA channel */
for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
......@@ -1239,6 +1266,19 @@ static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
spin_lock(&txq->lock);
/* In AGG mode, the index in the ring must correspond to the WiFi
* sequence number. This is a HW requirements to help the SCD to parse
* the BA.
* Check here that the packets are in the right place on the ring.
*/
#ifdef CONFIG_IWLWIFI_DEBUG
wifi_seq = SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
WARN_ONCE((iwl_read_prph(trans, SCD_AGGR_SEL) & BIT(txq_id)) &&
((wifi_seq & 0xff) != q->write_ptr),
"Q: %d WiFi Seq %d tfdNum %d",
txq_id, wifi_seq, q->write_ptr);
#endif
/* Set up driver data for this TFD */
txq->entries[q->write_ptr].skb = skb;
txq->entries[q->write_ptr].cmd = dev_cmd;
......@@ -1332,7 +1372,8 @@ static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
skb->data + hdr_len, secondlen);
/* start timer if queue currently empty */
if (q->read_ptr == q->write_ptr && trans_pcie->wd_timeout)
if (txq->need_update && q->read_ptr == q->write_ptr &&
trans_pcie->wd_timeout)
mod_timer(&txq->stuck_timer, jiffies + trans_pcie->wd_timeout);
/* Tell device the write index *just past* this latest filled TFD */
......
drivers/net/wireless/iwlwifi/pcie/tx.c
浏览文件 @ b3c911ee
......@@ -380,8 +380,8 @@ static void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_trans *trans,
tfd_offset[TFD_QUEUE_SIZE_MAX + read_ptr] = bc_ent;
}
static int iwlagn_tx_queue_set_q2ratid(struct iwl_trans *trans, u16 ra_tid,
u16 txq_id)
static int iwl_txq_set_ratid_map(struct iwl_trans *trans, u16 ra_tid,
u16 txq_id)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u32 tbl_dw_addr;
......@@ -405,7 +405,7 @@ static int iwlagn_tx_queue_set_q2ratid(struct iwl_trans *trans, u16 ra_tid,
return 0;
}
static void iwlagn_tx_queue_stop_scheduler(struct iwl_trans *trans, u16 txq_id)
static inline void iwl_txq_set_inactive(struct iwl_trans *trans, u16 txq_id)
{
/* Simply stop the queue, but don't change any configuration;
* the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
......@@ -415,46 +415,16 @@ static void iwlagn_tx_queue_stop_scheduler(struct iwl_trans *trans, u16 txq_id)
(1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
}
void iwl_trans_set_wr_ptrs(struct iwl_trans *trans, int txq_id, u32 index)
{
IWL_DEBUG_TX_QUEUES(trans, "Q %d WrPtr: %d\n", txq_id, index & 0xff);
iwl_write_direct32(trans, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
iwl_write_prph(trans, SCD_QUEUE_RDPTR(txq_id), index);
}
void iwl_trans_tx_queue_set_status(struct iwl_trans *trans,
struct iwl_tx_queue *txq,
int tx_fifo_id, bool active)
{
int txq_id = txq->q.id;
iwl_write_prph(trans, SCD_QUEUE_STATUS_BITS(txq_id),
(active << SCD_QUEUE_STTS_REG_POS_ACTIVE) |
(tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) |
(1 << SCD_QUEUE_STTS_REG_POS_WSL) |
SCD_QUEUE_STTS_REG_MSK);
if (active)
IWL_DEBUG_TX_QUEUES(trans, "Activate queue %d on FIFO %d\n",
txq_id, tx_fifo_id);
else
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
}
void __iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id,
int fifo, int sta_id, int tid,
int frame_limit, u16 ssn)
void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
int sta_id, int tid, int frame_limit, u16 ssn)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
lockdep_assert_held(&trans_pcie->irq_lock);
if (test_and_set_bit(txq_id, trans_pcie->queue_used))
WARN_ONCE(1, "queue %d already used - expect issues", txq_id);
/* Stop this Tx queue before configuring it */
iwlagn_tx_queue_stop_scheduler(trans, txq_id);
iwl_txq_set_inactive(trans, txq_id);
/* Set this queue as a chain-building queue unless it is CMD queue */
if (txq_id != trans_pcie->cmd_queue)
......@@ -465,17 +435,27 @@ void __iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id,
u16 ra_tid = BUILD_RAxTID(sta_id, tid);
/* Map receiver-address / traffic-ID to this queue */
iwlagn_tx_queue_set_q2ratid(trans, ra_tid, txq_id);
iwl_txq_set_ratid_map(trans, ra_tid, txq_id);
/* enable aggregations for the queue */
iwl_set_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id));
} else {
/*
* disable aggregations for the queue, this will also make the
* ra_tid mapping configuration irrelevant since it is now a
* non-AGG queue.
*/
iwl_clear_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id));
}
/* Place first TFD at index corresponding to start sequence number.
* Assumes that ssn_idx is valid (!= 0xFFF) */
trans_pcie->txq[txq_id].q.read_ptr = (ssn & 0xff);
trans_pcie->txq[txq_id].q.write_ptr = (ssn & 0xff);
iwl_trans_set_wr_ptrs(trans, txq_id, ssn);
iwl_write_direct32(trans, HBUS_TARG_WRPTR,
(ssn & 0xff) | (txq_id << 8));
iwl_write_prph(trans, SCD_QUEUE_RDPTR(txq_id), ssn);
/* Set up Tx window size and frame limit for this queue */
iwl_write_targ_mem(trans, trans_pcie->scd_base_addr +
......@@ -488,43 +468,34 @@ void __iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id,
SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[txq_id],
fifo, true);
}
void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
int sta_id, int tid, int frame_limit, u16 ssn)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
unsigned long flags;
spin_lock_irqsave(&trans_pcie->irq_lock, flags);
__iwl_trans_pcie_txq_enable(trans, txq_id, fifo, sta_id,
tid, frame_limit, ssn);
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
iwl_write_prph(trans, SCD_QUEUE_STATUS_BITS(txq_id),
(1 << SCD_QUEUE_STTS_REG_POS_ACTIVE) |
(fifo << SCD_QUEUE_STTS_REG_POS_TXF) |
(1 << SCD_QUEUE_STTS_REG_POS_WSL) |
SCD_QUEUE_STTS_REG_MSK);
IWL_DEBUG_TX_QUEUES(trans, "Activate queue %d on FIFO %d WrPtr: %d\n",
txq_id, fifo, ssn & 0xff);
}
void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u16 rd_ptr, wr_ptr;
int n_bd = trans_pcie->txq[txq_id].q.n_bd;
if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) {
WARN_ONCE(1, "queue %d not used", txq_id);
return;
}
iwlagn_tx_queue_stop_scheduler(trans, txq_id);
iwl_clear_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id));
rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1);
wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id));
trans_pcie->txq[txq_id].q.read_ptr = 0;
trans_pcie->txq[txq_id].q.write_ptr = 0;
iwl_trans_set_wr_ptrs(trans, txq_id, 0);
WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]",
txq_id, rd_ptr, wr_ptr);
iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[txq_id],
0, false);
iwl_txq_set_inactive(trans, txq_id);
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
}
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
......
drivers/net/wireless/mwifiex/uap_cmd.c
浏览文件 @ b3c911ee
......@@ -27,6 +27,17 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
struct cfg80211_ap_settings *params) {
int i;
if (!params->privacy) {
bss_config->protocol = PROTOCOL_NO_SECURITY;
bss_config->key_mgmt = KEY_MGMT_NONE;
bss_config->wpa_cfg.length = 0;
priv->sec_info.wep_enabled = 0;
priv->sec_info.wpa_enabled = 0;
priv->sec_info.wpa2_enabled = 0;
return 0;
}
switch (params->auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
bss_config->auth_mode = WLAN_AUTH_OPEN;
......
drivers/net/wireless/rndis_wlan.c
浏览文件 @ b3c911ee
......@@ -2110,7 +2110,7 @@ static int rndis_check_bssid_list(struct usbnet *usbdev, u8 *match_bssid,
while (check_bssid_list_item(bssid, bssid_len, buf, len)) {
if (rndis_bss_info_update(usbdev, bssid) && match_bssid &&
matched) {
if (!ether_addr_equal(bssid->mac, match_bssid))
if (ether_addr_equal(bssid->mac, match_bssid))
*matched = true;
}
......
include/net/bluetooth/a2mp.h 0 → 100644
浏览文件 @ b3c911ee
/*
Copyright (c) 2010,2011 Code Aurora Forum. All rights reserved.
Copyright (c) 2011,2012 Intel Corp.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 and
only version 2 as published by the Free Software Foundation.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
#ifndef __A2MP_H
#define __A2MP_H
#include <net/bluetooth/l2cap.h>
#define A2MP_FEAT_EXT 0x8000
struct amp_mgr {
struct l2cap_conn *l2cap_conn;
struct l2cap_chan *a2mp_chan;
struct kref kref;
__u8 ident;
__u8 handle;
unsigned long flags;
};
struct a2mp_cmd {
__u8 code;
__u8 ident;
__le16 len;
__u8 data[0];
} __packed;
/* A2MP command codes */
#define A2MP_COMMAND_REJ 0x01
struct a2mp_cmd_rej {
__le16 reason;
__u8 data[0];
} __packed;
#define A2MP_DISCOVER_REQ 0x02
struct a2mp_discov_req {
__le16 mtu;
__le16 ext_feat;
} __packed;
struct a2mp_cl {
__u8 id;
__u8 type;
__u8 status;
} __packed;
#define A2MP_DISCOVER_RSP 0x03
struct a2mp_discov_rsp {
__le16 mtu;
__le16 ext_feat;
struct a2mp_cl cl[0];
} __packed;
#define A2MP_CHANGE_NOTIFY 0x04
#define A2MP_CHANGE_RSP 0x05
#define A2MP_GETINFO_REQ 0x06
struct a2mp_info_req {
__u8 id;
} __packed;
#define A2MP_GETINFO_RSP 0x07
struct a2mp_info_rsp {
__u8 id;
__u8 status;
__le32 total_bw;
__le32 max_bw;
__le32 min_latency;
__le16 pal_cap;
__le16 assoc_size;
} __packed;
#define A2MP_GETAMPASSOC_REQ 0x08
struct a2mp_amp_assoc_req {
__u8 id;
} __packed;
#define A2MP_GETAMPASSOC_RSP 0x09
struct a2mp_amp_assoc_rsp {
__u8 id;
__u8 status;
__u8 amp_assoc[0];
} __packed;
#define A2MP_CREATEPHYSLINK_REQ 0x0A
#define A2MP_DISCONNPHYSLINK_REQ 0x0C
struct a2mp_physlink_req {
__u8 local_id;
__u8 remote_id;
__u8 amp_assoc[0];
} __packed;
#define A2MP_CREATEPHYSLINK_RSP 0x0B
#define A2MP_DISCONNPHYSLINK_RSP 0x0D
struct a2mp_physlink_rsp {
__u8 local_id;
__u8 remote_id;
__u8 status;
} __packed;
/* A2MP response status */
#define A2MP_STATUS_SUCCESS 0x00
#define A2MP_STATUS_INVALID_CTRL_ID 0x01
#define A2MP_STATUS_UNABLE_START_LINK_CREATION 0x02
#define A2MP_STATUS_NO_PHYSICAL_LINK_EXISTS 0x02
#define A2MP_STATUS_COLLISION_OCCURED 0x03
#define A2MP_STATUS_DISCONN_REQ_RECVD 0x04
#define A2MP_STATUS_PHYS_LINK_EXISTS 0x05
#define A2MP_STATUS_SECURITY_VIOLATION 0x06
void amp_mgr_get(struct amp_mgr *mgr);
int amp_mgr_put(struct amp_mgr *mgr);
struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn,
struct sk_buff *skb);
#endif /* __A2MP_H */
include/net/bluetooth/bluetooth.h
浏览文件 @ b3c911ee
/*
/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
......@@ -12,22 +12,19 @@
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
#ifndef __BLUETOOTH_H
#define __BLUETOOTH_H
#include <asm/types.h>
#include <asm/byteorder.h>
#include <linux/list.h>
#include <linux/poll.h>
#include <net/sock.h>
......@@ -168,8 +165,8 @@ typedef struct {
#define BDADDR_LE_PUBLIC 0x01
#define BDADDR_LE_RANDOM 0x02
#define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}})
#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff}})
#define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0} })
#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff} })
/* Copy, swap, convert BD Address */
static inline int bacmp(bdaddr_t *ba1, bdaddr_t *ba2)
......@@ -215,7 +212,7 @@ int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t len, int flags);
int bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t len, int flags);
uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait);
uint bt_sock_poll(struct file *file, struct socket *sock, poll_table *wait);
int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
......@@ -225,12 +222,12 @@ struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
/* Skb helpers */
struct l2cap_ctrl {
unsigned int sframe : 1,
poll : 1,
final : 1,
fcs : 1,
sar : 2,
super : 2;
unsigned int sframe:1,
poll:1,
final:1,
fcs:1,
sar:2,
super:2;
__u16 reqseq;
__u16 txseq;
__u8 retries;
......@@ -249,7 +246,8 @@ static inline struct sk_buff *bt_skb_alloc(unsigned int len, gfp_t how)
{
struct sk_buff *skb;
if ((skb = alloc_skb(len + BT_SKB_RESERVE, how))) {
skb = alloc_skb(len + BT_SKB_RESERVE, how);
if (skb) {
skb_reserve(skb, BT_SKB_RESERVE);
bt_cb(skb)->incoming = 0;
}
......@@ -261,7 +259,8 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk,
{
struct sk_buff *skb;
if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err);
if (skb) {
skb_reserve(skb, BT_SKB_RESERVE);
bt_cb(skb)->incoming = 0;
}
......
include/net/bluetooth/hci.h
浏览文件 @ b3c911ee
此差异已折叠。
include/net/bluetooth/hci_core.h
浏览文件 @ b3c911ee
......@@ -25,7 +25,6 @@
#ifndef __HCI_CORE_H
#define __HCI_CORE_H
#include <linux/interrupt.h>
#include <net/bluetooth/hci.h>
/* HCI priority */
......@@ -65,7 +64,7 @@ struct discovery_state {
DISCOVERY_RESOLVING,
DISCOVERY_STOPPING,
} state;
struct list_head all; /* All devices found during inquiry */
struct list_head all; /* All devices found during inquiry */
struct list_head unknown; /* Name state not known */
struct list_head resolve; /* Name needs to be resolved */
__u32 timestamp;
......@@ -105,7 +104,7 @@ struct link_key {
struct list_head list;
bdaddr_t bdaddr;
u8 type;
u8 val[16];
u8 val[HCI_LINK_KEY_SIZE];
u8 pin_len;
};
......@@ -333,6 +332,7 @@ struct hci_conn {
void *l2cap_data;
void *sco_data;
void *smp_conn;
struct amp_mgr *amp_mgr;
struct hci_conn *link;
......@@ -360,7 +360,8 @@ extern int l2cap_connect_cfm(struct hci_conn *hcon, u8 status);
extern int l2cap_disconn_ind(struct hci_conn *hcon);
extern int l2cap_disconn_cfm(struct hci_conn *hcon, u8 reason);
extern int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt);
extern int l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags);
extern int l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb,
u16 flags);
extern int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr);
extern int sco_connect_cfm(struct hci_conn *hcon, __u8 status);
......@@ -429,8 +430,8 @@ enum {
static inline bool hci_conn_ssp_enabled(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
return (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) &&
test_bit(HCI_CONN_SSP_ENABLED, &conn->flags));
return test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) &&
test_bit(HCI_CONN_SSP_ENABLED, &conn->flags);
}
static inline void hci_conn_hash_init(struct hci_dev *hdev)
......@@ -640,6 +641,19 @@ static inline void hci_set_drvdata(struct hci_dev *hdev, void *data)
dev_set_drvdata(&hdev->dev, data);
}
/* hci_dev_list shall be locked */
static inline uint8_t __hci_num_ctrl(void)
{
uint8_t count = 0;
struct list_head *p;
list_for_each(p, &hci_dev_list) {
count++;
}
return count;
}
struct hci_dev *hci_dev_get(int index);
struct hci_dev *hci_get_route(bdaddr_t *src, bdaddr_t *dst);
......@@ -661,7 +675,8 @@ int hci_get_conn_info(struct hci_dev *hdev, void __user *arg);
int hci_get_auth_info(struct hci_dev *hdev, void __user *arg);
int hci_inquiry(void __user *arg);
struct bdaddr_list *hci_blacklist_lookup(struct hci_dev *hdev, bdaddr_t *bdaddr);
struct bdaddr_list *hci_blacklist_lookup(struct hci_dev *hdev,
bdaddr_t *bdaddr);
int hci_blacklist_clear(struct hci_dev *hdev);
int hci_blacklist_add(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
int hci_blacklist_del(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
......
include/net/bluetooth/l2cap.h
浏览文件 @ b3c911ee
此差异已折叠。
include/net/mac80211.h
浏览文件 @ b3c911ee
......@@ -1945,6 +1945,11 @@ enum ieee80211_rate_control_changed {
* to also unregister the device. If it returns 1, then mac80211
* will also go through the regular complete restart on resume.
*
* @set_wakeup: Enable or disable wakeup when WoWLAN configuration is
* modified. The reason is that device_set_wakeup_enable() is
* supposed to be called when the configuration changes, not only
* in suspend().
*
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented.
......@@ -2974,6 +2979,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
* ieee80211_generic_frame_duration - Calculate the duration field for a frame
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @band: the band to calculate the frame duration on
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
......
net/bluetooth/Makefile
浏览文件 @ b3c911ee
......@@ -9,4 +9,5 @@ obj-$(CONFIG_BT_CMTP) += cmtp/
obj-$(CONFIG_BT_HIDP) += hidp/
bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o sco.o lib.o
hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o sco.o lib.o \
a2mp.o
net/bluetooth/a2mp.c 0 → 100644
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/af_bluetooth.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/bnep/core.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/bnep/netdev.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/bnep/sock.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hci_conn.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hci_core.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hci_event.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hci_sock.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hci_sysfs.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hidp/core.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/hidp/sock.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/l2cap_core.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/l2cap_sock.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/lib.c
浏览文件 @ b3c911ee
......@@ -26,12 +26,7 @@
#define pr_fmt(fmt) "Bluetooth: " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <asm/errno.h>
#include <linux/export.h>
#include <net/bluetooth/bluetooth.h>
......
net/bluetooth/mgmt.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/rfcomm/core.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/rfcomm/sock.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/rfcomm/tty.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/sco.c
浏览文件 @ b3c911ee
此差异已折叠。
net/bluetooth/smp.c
浏览文件 @ b3c911ee
此差异已折叠。
net/mac80211/cfg.c
浏览文件 @ b3c911ee
此差异已折叠。
net/mac80211/mlme.c
浏览文件 @ b3c911ee
此差异已折叠。
net/mac80211/sta_info.h
浏览文件 @ b3c911ee
此差异已折叠。
net/wireless/reg.c
浏览文件 @ b3c911ee
此差异已折叠。
net/wireless/util.c
浏览文件 @ b3c911ee
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或