Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 b3c37522 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

power management changes for omap and imx

A significant part of the changes for these two platforms went into
power management, so they are split out into a separate branch.

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1
  ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation
  ARM: imx6q: resume PL310 only when CACHE_L2X0 defined
  ARM: imx6q: build pm code only when CONFIG_PM selected
  ARM: mx5: use generic irq chip pm interface for pm functions on
  ARM: omap: pass minimal SoC/board data for UART from dt
  arm/dts: Add minimal device tree support for omap2420 and omap2430
  omap-serial: Add minimal device tree support
  omap-serial: Use default clock speed (48Mhz) if not specified
  omap-serial: Get rid of all pdev->id usage
  ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
  ARM: OMAP4: PRM: use PRCM interrupt handler
  ARM: OMAP3: pm: use prcm chain handler
  ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
  ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  ARM: OMAP: PRCM: add suspend prepare / finish support
  ARM: OMAP: PRCM: add support for chain interrupt handler
  ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
  ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
  ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
  ...
上级 2ac9d7aa 6d0a5636
展开全部 隐藏空白更改
内联 并排
Showing with 3871 addition and 1180 deletion
Documentation/devicetree/bindings/serial/omap_serial.txt 0 → 100644
浏览文件 @ b3c37522
OMAP UART controller
Required properties:
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
Optional properties:
- clock-frequency : frequency of the clock input to the UART
arch/arm/boot/dts/omap2.dtsi 0 → 100644
浏览文件 @ b3c37522
/*
* Device Tree Source for OMAP2 SoC
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
};
cpus {
cpu@0 {
compatible = "arm,arm1136jf-s";
};
};
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap2-mpu";
ti,hwmods = "mpu";
};
};
ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main";
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@4806e000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
};
};
arch/arm/boot/dts/omap3.dtsi
浏览文件 @ b3c37522
......@@ -13,6 +13,13 @@
/ {
compatible = "ti,omap3430", "ti,omap3";
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
};
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
......@@ -59,5 +66,29 @@
interrupt-controller;
#interrupt-cells = <1>;
};
uart1: serial@0x4806a000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@0x4806c000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@0x49020000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@0x49042000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
};
};
arch/arm/boot/dts/omap4.dtsi
浏览文件 @ b3c37522
......@@ -21,6 +21,10 @@
interrupt-parent = <&gic>;
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
};
cpus {
......@@ -99,5 +103,29 @@
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
uart1: serial@0x4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@0x4806c000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@0x48020000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@0x4806e000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
};
};
arch/arm/mach-imx/Kconfig
浏览文件 @ b3c37522
......@@ -596,6 +596,7 @@ comment "i.MX6 family:"
config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU
......
arch/arm/mach-imx/Makefile
浏览文件 @ b3c37522
......@@ -70,4 +70,8 @@ AFLAGS_head-v7.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
endif
arch/arm/mach-imx/head-v7.S
浏览文件 @ b3c37522
......@@ -16,7 +16,6 @@
#include <asm/hardware/cache-l2x0.h>
.section ".text.head", "ax"
__CPUINIT
/*
* The secondary kernel init calls v7_flush_dcache_all before it enables
......@@ -33,6 +32,7 @@
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
......@@ -71,6 +71,7 @@ ENTRY(v7_secondary_startup)
ENDPROC(v7_secondary_startup)
#endif
#ifdef CONFIG_PM
/*
* The following code is located into the .data section. This is to
* allow phys_l2x0_saved_regs to be accessed with a relative load
......@@ -79,6 +80,7 @@ ENDPROC(v7_secondary_startup)
.data
.align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
ldr r2, phys_l2x0_saved_regs
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
......@@ -88,12 +90,17 @@ ENDPROC(v7_secondary_startup)
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
.globl phys_l2x0_saved_regs
phys_l2x0_saved_regs:
.long 0
#else
.macro pl310_resume
.endm
#endif
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
pl310_resume
b cpu_resume
ENDPROC(v7_cpu_resume)
.globl phys_l2x0_saved_regs
phys_l2x0_saved_regs:
.long 0
#endif
arch/arm/mach-imx/pm-imx6q.c
浏览文件 @ b3c37522
......@@ -64,7 +64,9 @@ void __init imx6q_pm_init(void)
* address of the data structure used by l2x0 core to save registers,
* and later restore the necessary ones in imx6q resume entry.
*/
#ifdef CONFIG_CACHE_L2X0
phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
#endif
suspend_set_ops(&imx6q_pm_ops);
}
arch/arm/mach-mx5/mm.c
浏览文件 @ b3c37522
......@@ -13,6 +13,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <asm/mach/map.h>
......@@ -21,10 +22,26 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
static struct clk *gpc_dvfs_clk;
static void imx5_idle(void)
{
if (!need_resched())
if (!need_resched()) {
/* gpc clock is needed for SRPG */
if (gpc_dvfs_clk == NULL) {
gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
if (IS_ERR(gpc_dvfs_clk))
goto err0;
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (tzic_enable_wake())
goto err1;
cpu_do_idle();
err1:
clk_disable(gpc_dvfs_clk);
}
err0:
local_irq_enable();
}
......
arch/arm/mach-mx5/system.c
浏览文件 @ b3c37522
......@@ -55,9 +55,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
stop_mode = 1;
}
arm_srpgcr |= MXC_SRPGCR_PCR;
if (tzic_enable_wake(1) != 0)
return;
break;
case STOP_POWER_ON:
ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
......
arch/arm/mach-omap2/Kconfig
浏览文件 @ b3c37522
......@@ -365,6 +365,27 @@ config OMAP3_SDRC_AC_TIMING
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
config OMAP4_ERRATA_I688
bool "OMAP4 errata: Async Bridge Corruption"
depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back
pressure, it may be accepted multiple times, creating pointer
misalignment that will corrupt next transfers on that data path
until next reset of the system (No recovery procedure once the
issue is hit, the path remains consistently broken). Async bridge
can be found on path between MPU to EMIF and MPU to L3 interconnect.
This situation can happen only when the idle is initiated by a
Master Request Disconnection (which is trigged by software when
executing WFI on CPU).
The work-around for this errata needs all the initiators connected
through async bridge must ensure that data path is properly drained
before issuing WFI. This condition will be met if one Strongly ordered
access is performed to the target right before executing the WFI.
In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
IO barrier ensure that there is no synchronisation loss on initiators
operating on both interconnect port simultaneously.
endmenu
endif
arch/arm/mach-omap2/Makefile
浏览文件 @ b3c37522
......@@ -11,10 +11,11 @@ hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
......@@ -24,11 +25,13 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \
sleep44xx.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
......@@ -62,7 +65,8 @@ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
cpuidle34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \
cpuidle44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
......@@ -77,6 +81,7 @@ endif
endif
# PRCM
obj-y += prm_common.o
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
vc3xxx_data.o vp3xxx_data.o
......@@ -86,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
cm44xx.o prcm_mpu44xx.o \
prminst44xx.o vc44xx_data.o \
vp44xx_data.o
vp44xx_data.o prm44xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
......
arch/arm/mach-omap2/board-3430sdp.c
浏览文件 @ b3c37522
......@@ -475,106 +475,8 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial1_pads[] __initdata = {
/*
* Note that off output enable is an active low
* signal. So setting this means pin is a
* input enabled in off mode
*/
OMAP_MUX_STATIC("uart1_cts.uart1_cts",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart1_rts.uart1_rts",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart1_rx.uart1_rx",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart1_tx.uart1_tx",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLDOWN |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
};
static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static inline void board_serial_init(void)
{
omap_serial_init_port(&serial1_data);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
/*
......@@ -711,7 +613,7 @@ static void __init omap_3430sdp_init(void)
else
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
omap_serial_init();
omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
......
arch/arm/mach-omap2/board-4430sdp.c
浏览文件 @ b3c37522
......@@ -844,74 +844,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
/* pass dummy data for UART1 */
omap_serial_init_port(&bdata);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
omap_serial_init_port(&serial4_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
static void omap4_sdp4430_wifi_mux_init(void)
......@@ -961,7 +895,7 @@ static void __init omap_4430sdp_init(void)
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
......
arch/arm/mach-omap2/board-generic.c
浏览文件 @ b3c37522
......@@ -69,7 +69,6 @@ static void __init omap_generic_init(void)
if (node)
irq_domain_add_simple(node, 0);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
......
arch/arm/mach-omap2/board-n8x0.c
浏览文件 @ b3c37522
......@@ -644,15 +644,15 @@ static inline void board_serial_init(void)
bdata.pads_cnt = 0;
bdata.id = 0;
omap_serial_init_port(&bdata);
omap_serial_init_port(&bdata, NULL);
bdata.id = 1;
omap_serial_init_port(&bdata);
omap_serial_init_port(&bdata, NULL);
bdata.id = 2;
bdata.pads = serial2_pads;
bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
omap_serial_init_port(&bdata);
omap_serial_init_port(&bdata, NULL);
}
#else
......
arch/arm/mach-omap2/board-omap4panda.c
浏览文件 @ b3c37522
......@@ -364,74 +364,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
/* pass dummy data for UART1 */
omap_serial_init_port(&bdata);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
omap_serial_init_port(&serial4_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
/* Display DVI */
......@@ -562,7 +496,7 @@ static void __init omap4_panda_init(void)
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
......
arch/arm/mach-omap2/common.h
浏览文件 @ b3c37522
......@@ -24,9 +24,11 @@
#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
#ifndef __ASSEMBLER__
#include <linux/delay.h>
#include <plat/common.h>
#include <asm/proc-fns.h>
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
......@@ -168,23 +170,23 @@ void omap3_intc_resume_idle(void);
void omap2_intc_handle_irq(struct pt_regs *regs);
void omap3_intc_handle_irq(struct pt_regs *regs);
/*
* wfi used in low power code. Directly opcode is used instead
* of instruction to avoid mulit-omap build break
*/
#ifdef CONFIG_THUMB2_KERNEL
#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
#else
#define do_wfi() \
__asm__ __volatile__ (".word 0xe320f003" : : : "memory")
#ifdef CONFIG_CACHE_L2X0
extern void __iomem *omap4_get_l2cache_base(void);
#endif
#ifdef CONFIG_CACHE_L2X0
extern void __iomem *l2cache_base;
#ifdef CONFIG_SMP
extern void __iomem *omap4_get_scu_base(void);
#else
static inline void __iomem *omap4_get_scu_base(void)
{
return NULL;
}
#endif
extern void __init gic_init_irq(void);
extern void omap_smc1(u32 fn, u32 arg);
extern void __iomem *omap4_get_sar_ram_base(void);
extern void omap_do_wfi(void);
#ifdef CONFIG_SMP
/* Needed for secondary core boot */
......@@ -194,4 +196,44 @@ extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
#endif
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
extern int omap4_mpuss_init(void);
extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
extern int omap4_finish_suspend(unsigned long cpu_state);
extern void omap4_cpu_resume(void);
extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
extern u32 omap4_mpuss_read_prev_context_state(void);
#else
static inline int omap4_enter_lowpower(unsigned int cpu,
unsigned int power_state)
{
cpu_do_idle();
return 0;
}
static inline int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
{
cpu_do_idle();
return 0;
}
static inline int omap4_mpuss_init(void)
{
return 0;
}
static inline int omap4_finish_suspend(unsigned long cpu_state)
{
return 0;
}
static inline void omap4_cpu_resume(void)
{}
static inline u32 omap4_mpuss_read_prev_context_state(void)
{
return 0;
}
#endif
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
arch/arm/mach-omap2/cpuidle34xx.c
浏览文件 @ b3c37522
......@@ -25,12 +25,12 @@
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <linux/export.h>
#include <linux/cpu_pm.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/serial.h>
#include "pm.h"
#include "control.h"
......@@ -124,9 +124,23 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
}
/*
* Call idle CPU PM enter notifier chain so that
* VFP context is saved.
*/
if (mpu_state == PWRDM_POWER_OFF)
cpu_pm_enter();
/* Execute ARM wfi */
omap_sram_idle();
/*
* Call idle CPU PM enter notifier chain to restore
* VFP context.
*/
if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
cpu_pm_exit();
/* Re-allow idle for C1 */
if (index == 0) {
pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
......@@ -245,11 +259,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct omap3_idle_statedata *cx;
int ret;
if (!omap3_can_sleep()) {
new_state_idx = drv->safe_state_index;
goto select_state;
}
/*
* Prevent idle completely if CAM is active.
* CAM does not have wakeup capability in OMAP3.
......
arch/arm/mach-omap2/cpuidle44xx.c 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP4 CPU idle Routines
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
#include <linux/clockchips.h>
#include <asm/proc-fns.h>
#include "common.h"
#include "pm.h"
#include "prm.h"
#ifdef CONFIG_CPU_IDLE
/* Machine specific information to be recorded in the C-state driver_data */
struct omap4_idle_statedata {
u32 cpu_state;
u32 mpu_logic_state;
u32 mpu_state;
u8 valid;
};
static struct cpuidle_params cpuidle_params_table[] = {
/* C1 - CPU0 ON + CPU1 ON + MPU ON */
{.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1},
/* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */
{.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1},
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
{.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1},
};
#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES];
static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
/**
* omap4_enter_idle - Programs OMAP4 to enter the specified state
* @dev: cpuidle device
* @drv: cpuidle driver
* @index: the index of state to be entered
*
* Called from the CPUidle framework to program the device to the
* specified low power state selected by the governor.
* Returns the amount of time spent in the low power state.
*/
static int omap4_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
struct omap4_idle_statedata *cx =
cpuidle_get_statedata(&dev->states_usage[index]);
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
getnstimeofday(&ts_preidle);
local_irq_disable();
local_fiq_disable();
/*
* CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state.
* This is necessary to honour hardware recommondation
* of triggeing all the possible low power modes once CPU1 is
* out of coherency and in OFF mode.
* Update dev->last_state so that governor stats reflects right
* data.
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
new_state_idx = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
}
if (index > 0)
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
/*
* Call idle CPU PM enter notifier chain so that
* VFP and per CPU interrupt context is saved.
*/
if (cx->cpu_state == PWRDM_POWER_OFF)
cpu_pm_enter();
pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
/*
* Call idle CPU cluster PM enter notifier chain
* to save GIC and wakeupgen context.
*/
if ((cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF))
cpu_cluster_pm_enter();
omap4_enter_lowpower(dev->cpu, cx->cpu_state);
/*
* Call idle CPU PM exit notifier chain to restore
* VFP and per CPU IRQ context. Only CPU0 state is
* considered since CPU1 is managed by CPU hotplug.
*/
if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF)
cpu_pm_exit();
/*
* Call idle CPU cluster PM exit notifier chain
* to restore GIC and wakeupgen context.
*/
if (omap4_mpuss_read_prev_context_state())
cpu_cluster_pm_exit();
if (index > 0)
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
local_irq_enable();
local_fiq_enable();
idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \
USEC_PER_SEC;
/* Update cpuidle counters */
dev->last_residency = idle_time;
return index;
}
DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
};
static inline void _fill_cstate(struct cpuidle_driver *drv,
int idx, const char *descr)
{
struct cpuidle_state *state = &drv->states[idx];
state->exit_latency = cpuidle_params_table[idx].exit_latency;
state->target_residency = cpuidle_params_table[idx].target_residency;
state->flags = CPUIDLE_FLAG_TIME_VALID;
state->enter = omap4_enter_idle;
sprintf(state->name, "C%d", idx + 1);
strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
}
static inline struct omap4_idle_statedata *_fill_cstate_usage(
struct cpuidle_device *dev,
int idx)
{
struct omap4_idle_statedata *cx = &omap4_idle_data[idx];
struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
cx->valid = cpuidle_params_table[idx].valid;
cpuidle_set_statedata(state_usage, cx);
return cx;
}
/**
* omap4_idle_init - Init routine for OMAP4 idle
*
* Registers the OMAP4 specific cpuidle driver to the cpuidle
* framework with the valid set of states.
*/
int __init omap4_idle_init(void)
{
struct omap4_idle_statedata *cx;
struct cpuidle_device *dev;
struct cpuidle_driver *drv = &omap4_idle_driver;
unsigned int cpu_id = 0;
mpu_pd = pwrdm_lookup("mpu_pwrdm");
cpu0_pd = pwrdm_lookup("cpu0_pwrdm");
cpu1_pd = pwrdm_lookup("cpu1_pwrdm");
if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd))
return -ENODEV;
drv->safe_state_index = -1;
dev = &per_cpu(omap4_idle_dev, cpu_id);
dev->cpu = cpu_id;
/* C1 - CPU0 ON + CPU1 ON + MPU ON */
_fill_cstate(drv, 0, "MPUSS ON");
drv->safe_state_index = 0;
cx = _fill_cstate_usage(dev, 0);
cx->valid = 1; /* C1 is always valid */
cx->cpu_state = PWRDM_POWER_ON;
cx->mpu_state = PWRDM_POWER_ON;
cx->mpu_logic_state = PWRDM_POWER_RET;
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
_fill_cstate(drv, 1, "MPUSS CSWR");
cx = _fill_cstate_usage(dev, 1);
cx->cpu_state = PWRDM_POWER_OFF;
cx->mpu_state = PWRDM_POWER_RET;
cx->mpu_logic_state = PWRDM_POWER_RET;
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
_fill_cstate(drv, 2, "MPUSS OSWR");
cx = _fill_cstate_usage(dev, 2);
cx->cpu_state = PWRDM_POWER_OFF;
cx->mpu_state = PWRDM_POWER_RET;
cx->mpu_logic_state = PWRDM_POWER_OFF;
drv->state_count = OMAP4_NUM_STATES;
cpuidle_register_driver(&omap4_idle_driver);
dev->state_count = OMAP4_NUM_STATES;
if (cpuidle_register_device(dev)) {
pr_err("%s: CPUidle register device failed\n", __func__);
return -EIO;
}
return 0;
}
#else
int __init omap4_idle_init(void)
{
return 0;
}
#endif /* CONFIG_CPU_IDLE */
arch/arm/mach-omap2/include/mach/barriers.h 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP memory barrier header.
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __MACH_BARRIERS_H
#define __MACH_BARRIERS_H
extern void omap_bus_sync(void);
#define rmb() dsb()
#define wmb() do { dsb(); outer_sync(); omap_bus_sync(); } while (0)
#define mb() wmb()
#endif /* __MACH_BARRIERS_H */
arch/arm/mach-omap2/include/mach/omap-secure.h 0 → 100644
浏览文件 @ b3c37522
/*
* omap-secure.h: OMAP Secure infrastructure header.
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef OMAP_ARCH_OMAP_SECURE_H
#define OMAP_ARCH_OMAP_SECURE_H
/* Monitor error code */
#define API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR 0xFFFFFFFE
#define API_HAL_RET_VALUE_SERVICE_UNKNWON 0xFFFFFFFF
/* HAL API error codes */
#define API_HAL_RET_VALUE_OK 0x00
#define API_HAL_RET_VALUE_FAIL 0x01
/* Secure HAL API flags */
#define FLAG_START_CRITICAL 0x4
#define FLAG_IRQFIQ_MASK 0x3
#define FLAG_IRQ_ENABLE 0x2
#define FLAG_FIQ_ENABLE 0x1
#define NO_FLAG 0x0
/* Maximum Secure memory storage size */
#define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K)
/* Secure low power HAL API index */
#define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a
#define OMAP4_HAL_SAVEHW_INDEX 0x1b
#define OMAP4_HAL_SAVEALL_INDEX 0x1c
#define OMAP4_HAL_SAVEGIC_INDEX 0x1d
/* Secure Monitor mode APIs */
#define OMAP4_MON_SCU_PWR_INDEX 0x108
#define OMAP4_MON_L2X0_DBG_CTRL_INDEX 0x100
#define OMAP4_MON_L2X0_CTRL_INDEX 0x102
#define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
/* Secure PPA(Primary Protected Application) APIs */
#define OMAP4_PPA_L2_POR_INDEX 0x23
#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
#ifndef __ASSEMBLER__
extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
u32 arg1, u32 arg2, u32 arg3, u32 arg4);
extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
extern phys_addr_t omap_secure_ram_mempool_base(void);
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
arch/arm/mach-omap2/include/mach/omap-wakeupgen.h 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP WakeupGen header file
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef OMAP_ARCH_WAKEUPGEN_H
#define OMAP_ARCH_WAKEUPGEN_H
#define OMAP_WKG_CONTROL_0 0x00
#define OMAP_WKG_ENB_A_0 0x10
#define OMAP_WKG_ENB_B_0 0x14
#define OMAP_WKG_ENB_C_0 0x18
#define OMAP_WKG_ENB_D_0 0x1c
#define OMAP_WKG_ENB_SECURE_A_0 0x20
#define OMAP_WKG_ENB_SECURE_B_0 0x24
#define OMAP_WKG_ENB_SECURE_C_0 0x28
#define OMAP_WKG_ENB_SECURE_D_0 0x2c
#define OMAP_WKG_ENB_A_1 0x410
#define OMAP_WKG_ENB_B_1 0x414
#define OMAP_WKG_ENB_C_1 0x418
#define OMAP_WKG_ENB_D_1 0x41c
#define OMAP_WKG_ENB_SECURE_A_1 0x420
#define OMAP_WKG_ENB_SECURE_B_1 0x424
#define OMAP_WKG_ENB_SECURE_C_1 0x428
#define OMAP_WKG_ENB_SECURE_D_1 0x42c
#define OMAP_AUX_CORE_BOOT_0 0x800
#define OMAP_AUX_CORE_BOOT_1 0x804
#define OMAP_PTMSYNCREQ_MASK 0xc00
#define OMAP_PTMSYNCREQ_EN 0xc04
#define OMAP_TIMESTAMPCYCLELO 0xc08
#define OMAP_TIMESTAMPCYCLEHI 0xc0c
extern int __init omap_wakeupgen_init(void);
#endif
arch/arm/mach-omap2/io.c
浏览文件 @ b3c37522
......@@ -254,6 +254,15 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
.length = L4_EMU_44XX_SIZE,
.type = MT_DEVICE,
},
#ifdef CONFIG_OMAP4_ERRATA_I688
{
.virtual = OMAP4_SRAM_VA,
.pfn = __phys_to_pfn(OMAP4_SRAM_PA),
.length = PAGE_SIZE,
.type = MT_MEMORY_SO,
},
#endif
};
#endif
......
arch/arm/mach-omap2/mux.c
浏览文件 @ b3c37522
......@@ -32,6 +32,8 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/system.h>
......@@ -39,6 +41,7 @@
#include "control.h"
#include "mux.h"
#include "prm.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
......@@ -306,7 +309,8 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
pad->idle = bpad->idle;
pad->off = bpad->off;
if (pad->flags & OMAP_DEVICE_PAD_REMUX)
if (pad->flags &
(OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP))
nr_pads_dynamic++;
pr_debug("%s: Initialized %s\n", __func__, pad->name);
......@@ -331,7 +335,8 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
for (i = 0; i < hmux->nr_pads; i++) {
struct omap_device_pad *pad = &hmux->pads[i];
if (pad->flags & OMAP_DEVICE_PAD_REMUX) {
if (pad->flags &
(OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) {
pr_debug("%s: pad %s tagged dynamic\n",
__func__, pad->name);
hmux->pads_dynamic[nr_pads_dynamic] = pad;
......@@ -351,6 +356,78 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
return NULL;
}
/**
* omap_hwmod_mux_scan_wakeups - omap hwmod scan wakeup pads
* @hmux: Pads for a hwmod
* @mpu_irqs: MPU irq array for a hwmod
*
* Scans the wakeup status of pads for a single hwmod. If an irq
* array is defined for this mux, the parser will call the registered
* ISRs for corresponding pads, otherwise the parser will stop at the
* first wakeup active pad and return. Returns true if there is a
* pending and non-served wakeup event for the mux, otherwise false.
*/
static bool omap_hwmod_mux_scan_wakeups(struct omap_hwmod_mux_info *hmux,
struct omap_hwmod_irq_info *mpu_irqs)
{
int i, irq;
unsigned int val;
u32 handled_irqs = 0;
for (i = 0; i < hmux->nr_pads_dynamic; i++) {
struct omap_device_pad *pad = hmux->pads_dynamic[i];
if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP) ||
!(pad->idle & OMAP_WAKEUP_EN))
continue;
val = omap_mux_read(pad->partition, pad->mux->reg_offset);
if (!(val & OMAP_WAKEUP_EVENT))
continue;
if (!hmux->irqs)
return true;
irq = hmux->irqs[i];
/* make sure we only handle each irq once */
if (handled_irqs & 1 << irq)
continue;
handled_irqs |= 1 << irq;
generic_handle_irq(mpu_irqs[irq].irq);
}
return false;
}
/**
* _omap_hwmod_mux_handle_irq - Process wakeup events for a single hwmod
*
* Checks a single hwmod for every wakeup capable pad to see if there is an
* active wakeup event. If this is the case, call the corresponding ISR.
*/
static int _omap_hwmod_mux_handle_irq(struct omap_hwmod *oh, void *data)
{
if (!oh->mux || !oh->mux->enabled)
return 0;
if (omap_hwmod_mux_scan_wakeups(oh->mux, oh->mpu_irqs))
generic_handle_irq(oh->mpu_irqs[0].irq);
return 0;
}
/**
* omap_hwmod_mux_handle_irq - Process pad wakeup irqs.
*
* Calls a function for each registered omap_hwmod to check
* pad wakeup statuses.
*/
static irqreturn_t omap_hwmod_mux_handle_irq(int irq, void *unused)
{
omap_hwmod_for_each(_omap_hwmod_mux_handle_irq, NULL);
return IRQ_HANDLED;
}
/* Assumes the calling function takes care of locking */
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
{
......@@ -715,6 +792,7 @@ static void __init omap_mux_free_names(struct omap_mux *m)
static int __init omap_mux_late_init(void)
{
struct omap_mux_partition *partition;
int ret;
list_for_each_entry(partition, &mux_partitions, node) {
struct omap_mux_entry *e, *tmp;
......@@ -735,6 +813,13 @@ static int __init omap_mux_late_init(void)
}
}
ret = request_irq(omap_prcm_event_to_irq("io"),
omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
"hwmod_io", omap_mux_late_init);
if (ret)
pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
omap_mux_dbg_init();
return 0;
......
arch/arm/mach-omap2/omap-headsmp.S
浏览文件 @ b3c37522
......@@ -18,11 +18,6 @@
#include <linux/linkage.h>
#include <linux/init.h>
/* Physical address needed since MMU not enabled yet on secondary core */
#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804
__INIT
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
......
arch/arm/mach-omap2/omap-hotplug.c
浏览文件 @ b3c37522
......@@ -22,6 +22,8 @@
#include "common.h"
#include "powerdomain.h"
int platform_cpu_kill(unsigned int cpu)
{
return 1;
......@@ -33,6 +35,8 @@ int platform_cpu_kill(unsigned int cpu)
*/
void platform_cpu_die(unsigned int cpu)
{
unsigned int this_cpu;
flush_cache_all();
dsb();
......@@ -40,15 +44,15 @@ void platform_cpu_die(unsigned int cpu)
* we're ready for shutdown now, so do it
*/
if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
printk(KERN_CRIT "Secure clear status failed\n");
pr_err("Secure clear status failed\n");
for (;;) {
/*
* Execute WFI
* Enter into low power state
*/
do_wfi();
if (omap_read_auxcoreboot0() == cpu) {
omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
this_cpu = smp_processor_id();
if (omap_read_auxcoreboot0() == this_cpu) {
/*
* OK, proper wakeup, we're done
*/
......
arch/arm/mach-omap2/omap-mpuss-lowpower.c 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP MPUSS low power code
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* OMAP4430 MPUSS mainly consists of dual Cortex-A9 with per-CPU
* Local timer and Watchdog, GIC, SCU, PL310 L2 cache controller,
* CPU0 and CPU1 LPRM modules.
* CPU0, CPU1 and MPUSS each have there own power domain and
* hence multiple low power combinations of MPUSS are possible.
*
* The CPU0 and CPU1 can't support Closed switch Retention (CSWR)
* because the mode is not supported by hw constraints of dormant
* mode. While waking up from the dormant mode, a reset signal
* to the Cortex-A9 processor must be asserted by the external
* power controller.
*
* With architectural inputs and hardware recommendations, only
* below modes are supported from power gain vs latency point of view.
*
* CPU0 CPU1 MPUSS
* ----------------------------------------------
* ON ON ON
* ON(Inactive) OFF ON(Inactive)
* OFF OFF CSWR
* OFF OFF OSWR
* OFF OFF OFF(Device OFF *TBD)
* ----------------------------------------------
*
* Note: CPU0 is the master core and it is the last CPU to go down
* and first to wake-up when MPUSS low power states are excercised
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/smp_scu.h>
#include <asm/system.h>
#include <asm/pgalloc.h>
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
#include <plat/omap44xx.h>
#include "common.h"
#include "omap4-sar-layout.h"
#include "pm.h"
#include "prcm_mpu44xx.h"
#include "prminst44xx.h"
#include "prcm44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#ifdef CONFIG_SMP
struct omap4_cpu_pm_info {
struct powerdomain *pwrdm;
void __iomem *scu_sar_addr;
void __iomem *wkup_sar_addr;
void __iomem *l2x0_sar_addr;
};
static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
static struct powerdomain *mpuss_pd;
static void __iomem *sar_base;
/*
* Program the wakeup routine address for the CPU0 and CPU1
* used for OFF or DORMANT wakeup.
*/
static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
__raw_writel(addr, pm_info->wkup_sar_addr);
}
/*
* Set the CPUx powerdomain's previous power state
*/
static inline void set_cpu_next_pwrst(unsigned int cpu_id,
unsigned int power_state)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
}
/*
* Read CPU's previous power state
*/
static inline unsigned int read_cpu_prev_pwrst(unsigned int cpu_id)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
return pwrdm_read_prev_pwrst(pm_info->pwrdm);
}
/*
* Clear the CPUx powerdomain's previous power state
*/
static inline void clear_cpu_prev_pwrst(unsigned int cpu_id)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
}
/*
* Store the SCU power status value to scratchpad memory
*/
static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
u32 scu_pwr_st;
switch (cpu_state) {
case PWRDM_POWER_RET:
scu_pwr_st = SCU_PM_DORMANT;
break;
case PWRDM_POWER_OFF:
scu_pwr_st = SCU_PM_POWEROFF;
break;
case PWRDM_POWER_ON:
case PWRDM_POWER_INACTIVE:
default:
scu_pwr_st = SCU_PM_NORMAL;
break;
}
__raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
}
/* Helper functions for MPUSS OSWR */
static inline void mpuss_clear_prev_logic_pwrst(void)
{
u32 reg;
reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
}
static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
{
u32 reg;
if (cpu_id) {
reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
} else {
reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
}
}
/**
* omap4_mpuss_read_prev_context_state:
* Function returns the MPUSS previous context state
*/
u32 omap4_mpuss_read_prev_context_state(void)
{
u32 reg;
reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
return reg;
}
/*
* Store the CPU cluster state for L2X0 low power operations.
*/
static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
__raw_writel(save_state, pm_info->l2x0_sar_addr);
}
/*
* Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to
* in every restore MPUSS OFF path.
*/
#ifdef CONFIG_CACHE_L2X0
static void save_l2x0_context(void)
{
u32 val;
void __iomem *l2x0_base = omap4_get_l2cache_base();
val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
__raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
}
#else
static void save_l2x0_context(void)
{}
#endif
/**
* omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
* The purpose of this function is to manage low power programming
* of OMAP4 MPUSS subsystem
* @cpu : CPU ID
* @power_state: Low power state.
*
* MPUSS states for the context save:
* save_state =
* 0 - Nothing lost and no need to save: MPUSS INACTIVE
* 1 - CPUx L1 and logic lost: MPUSS CSWR
* 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
* 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
*/
int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
{
unsigned int save_state = 0;
unsigned int wakeup_cpu;
if (omap_rev() == OMAP4430_REV_ES1_0)
return -ENXIO;
switch (power_state) {
case PWRDM_POWER_ON:
case PWRDM_POWER_INACTIVE:
save_state = 0;
break;
case PWRDM_POWER_OFF:
save_state = 1;
break;
case PWRDM_POWER_RET:
default:
/*
* CPUx CSWR is invalid hardware state. Also CPUx OSWR
* doesn't make much scense, since logic is lost and $L1
* needs to be cleaned because of coherency. This makes
* CPUx OSWR equivalent to CPUX OFF and hence not supported
*/
WARN_ON(1);
return -ENXIO;
}
pwrdm_pre_transition();
/*
* Check MPUSS next state and save interrupt controller if needed.
* In MPUSS OSWR or device OFF, interrupt controller contest is lost.
*/
mpuss_clear_prev_logic_pwrst();
pwrdm_clear_all_prev_pwrst(mpuss_pd);
if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
(pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
save_state = 2;
clear_cpu_prev_pwrst(cpu);
cpu_clear_prev_logic_pwrst(cpu);
set_cpu_next_pwrst(cpu, power_state);
set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));
scu_pwrst_prepare(cpu, power_state);
l2x0_pwrst_prepare(cpu, save_state);
/*
* Call low level function with targeted low power state.
*/
cpu_suspend(save_state, omap4_finish_suspend);
/*
* Restore the CPUx power state to ON otherwise CPUx
* power domain can transitions to programmed low power
* state while doing WFI outside the low powe code. On
* secure devices, CPUx does WFI which can result in
* domain transition
*/
wakeup_cpu = smp_processor_id();
set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
pwrdm_post_transition();
return 0;
}
/**
* omap4_hotplug_cpu: OMAP4 CPU hotplug entry
* @cpu : CPU ID
* @power_state: CPU low power state.
*/
int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
{
unsigned int cpu_state = 0;
if (omap_rev() == OMAP4430_REV_ES1_0)
return -ENXIO;
if (power_state == PWRDM_POWER_OFF)
cpu_state = 1;
clear_cpu_prev_pwrst(cpu);
set_cpu_next_pwrst(cpu, power_state);
set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup));
scu_pwrst_prepare(cpu, power_state);
/*
* CPU never retuns back if targetted power state is OFF mode.
* CPU ONLINE follows normal CPU ONLINE ptah via
* omap_secondary_startup().
*/
omap4_finish_suspend(cpu_state);
set_cpu_next_pwrst(cpu, PWRDM_POWER_ON);
return 0;
}
/*
* Initialise OMAP4 MPUSS
*/
int __init omap4_mpuss_init(void)
{
struct omap4_cpu_pm_info *pm_info;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
return -ENODEV;
}
sar_base = omap4_get_sar_ram_base();
/* Initilaise per CPU PM information */
pm_info = &per_cpu(omap4_pm_info, 0x0);
pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU0 pwrdm\n");
return -ENODEV;
}
/* Clear CPU previous power domain state */
pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
cpu_clear_prev_logic_pwrst(0);
/* Initialise CPU0 power domain state to ON */
pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
pm_info = &per_cpu(omap4_pm_info, 0x1);
pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU1 pwrdm\n");
return -ENODEV;
}
/* Clear CPU previous power domain state */
pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
cpu_clear_prev_logic_pwrst(1);
/* Initialise CPU1 power domain state to ON */
pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
mpuss_pd = pwrdm_lookup("mpu_pwrdm");
if (!mpuss_pd) {
pr_err("Failed to lookup MPUSS power domain\n");
return -ENODEV;
}
pwrdm_clear_all_prev_pwrst(mpuss_pd);
mpuss_clear_prev_logic_pwrst();
/* Save device type on scratchpad for low level code to use */
if (omap_type() != OMAP2_DEVICE_TYPE_GP)
__raw_writel(1, sar_base + OMAP_TYPE_OFFSET);
else
__raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
save_l2x0_context();
return 0;
}
#endif
arch/arm/mach-omap2/omap-secure.c 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP Secure API infrastructure.
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
*
* This program is free software,you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/memblock.h>
#include <asm/cacheflush.h>
#include <mach/omap-secure.h>
static phys_addr_t omap_secure_memblock_base;
/**
* omap_sec_dispatcher: Routine to dispatch low power secure
* service routines
* @idx: The HAL API index
* @flag: The flag indicating criticality of operation
* @nargs: Number of valid arguments out of four.
* @arg1, arg2, arg3 args4: Parameters passed to secure API
*
* Return the non-zero error value on failure.
*/
u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
u32 arg3, u32 arg4)
{
u32 ret;
u32 param[5];
param[0] = nargs;
param[1] = arg1;
param[2] = arg2;
param[3] = arg3;
param[4] = arg4;
/*
* Secure API needs physical address
* pointer for the parameters
*/
flush_cache_all();
outer_clean_range(__pa(param), __pa(param + 5));
ret = omap_smc2(idx, flag, __pa(param));
return ret;
}
/* Allocate the memory to save secure ram */
int __init omap_secure_ram_reserve_memblock(void)
{
phys_addr_t paddr;
u32 size = OMAP_SECURE_RAM_STORAGE;
size = ALIGN(size, SZ_1M);
paddr = memblock_alloc(size, SZ_1M);
if (!paddr) {
pr_err("%s: failed to reserve %x bytes\n",
__func__, size);
return -ENOMEM;
}
memblock_free(paddr, size);
memblock_remove(paddr, size);
omap_secure_memblock_base = paddr;
return 0;
}
phys_addr_t omap_secure_ram_mempool_base(void)
{
return omap_secure_memblock_base;
}
arch/arm/mach-omap2/omap44xx-smc.S → arch/arm/mach-omap2/omap-smc.S
浏览文件 @ b3c37522
......@@ -31,6 +31,29 @@ ENTRY(omap_smc1)
ldmfd sp!, {r2-r12, pc}
ENDPROC(omap_smc1)
/**
* u32 omap_smc2(u32 id, u32 falg, u32 pargs)
* Low level common routine for secure HAL and PPA APIs.
* @id: Application ID of HAL APIs
* @flag: Flag to indicate the criticality of operation
* @pargs: Physical address of parameter list starting
* with number of parametrs
*/
ENTRY(omap_smc2)
stmfd sp!, {r4-r12, lr}
mov r3, r2
mov r2, r1
mov r1, #0x0 @ Process ID
mov r6, #0xff
mov r12, #0x00 @ Secure Service ID
mov r7, #0
mcr p15, 0, r7, c7, c5, 6
dsb
dmb
smc #0
ldmfd sp!, {r4-r12, pc}
ENDPROC(omap_smc2)
ENTRY(omap_modify_auxcoreboot0)
stmfd sp!, {r1-r12, lr}
ldr r12, =0x104
......
arch/arm/mach-omap2/omap-smp.c
浏览文件 @ b3c37522
......@@ -24,16 +24,36 @@
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap-secure.h>
#include "common.h"
#include "clockdomain.h"
/* SCU base address */
static void __iomem *scu_base;
static DEFINE_SPINLOCK(boot_lock);
void __iomem *omap4_get_scu_base(void)
{
return scu_base;
}
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
* Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
* OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
* init and for CPU1, a secure PPA API provided. CPU0 must be ON
* while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
* OMAP443X GP devices- SMP bit isn't accessible.
* OMAP446X GP devices - SMP bit access is enabled on both CPUs.
*/
if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
4, 0, 0, 0, 0, 0);
/*
* If any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
......@@ -50,6 +70,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
/*
* Set synchronisation state between this boot processor
* and the secondary one
......@@ -65,6 +87,29 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
if (!cpu1_clkdm)
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
/*
* The SGI(Software Generated Interrupts) are not wakeup capable
* from low power states. This is known limitation on OMAP4 and
* needs to be worked around by using software forced clockdomain
* wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to
* software force wakeup. The clockdomain is then put back to
* hardware supervised mode.
* More details can be found in OMAP4430 TRM - Version J
* Section :
* 4.3.4.2 Power States of CPU0 and CPU1
*/
if (booted) {
clkdm_wakeup(cpu1_clkdm);
clkdm_allow_idle(cpu1_clkdm);
} else {
dsb_sev();
booted = true;
}
gic_raise_softirq(cpumask_of(cpu), 1);
/*
......
arch/arm/mach-omap2/omap-wakeupgen.c 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP WakeupGen Source file
*
* OMAP WakeupGen is the interrupt controller extension used along
* with ARM GIC to wake the CPU out from low power states on
* external interrupts. It is responsible for generating wakeup
* event from the incoming interrupts and enable bits. It is
* implemented in MPU always ON power domain. During normal operation,
* WakeupGen delivers external interrupts directly to the GIC.
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
#include <asm/hardware/gic.h>
#include <mach/omap-wakeupgen.h>
#include <mach/omap-secure.h>
#include "omap4-sar-layout.h"
#include "common.h"
#define NR_REG_BANKS 4
#define MAX_IRQS 128
#define WKG_MASK_ALL 0x00000000
#define WKG_UNMASK_ALL 0xffffffff
#define CPU_ENA_OFFSET 0x400
#define CPU0_ID 0x0
#define CPU1_ID 0x1
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
/*
* Static helper functions.
*/
static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
{
return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 +
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
{
__raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
static inline void sar_writel(u32 val, u32 offset, u8 idx)
{
__raw_writel(val, sar_base + offset + (idx * 4));
}
static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
{
u8 i;
for (i = 0; i < NR_REG_BANKS; i++)
wakeupgen_writel(reg, i, cpu);
}
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
unsigned int spi_irq;
/*
* PPIs and SGIs are not supported.
*/
if (irq < OMAP44XX_IRQ_GIC_START)
return -EINVAL;
/*
* Subtract the GIC offset.
*/
spi_irq = irq - OMAP44XX_IRQ_GIC_START;
if (spi_irq > MAX_IRQS) {
pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
return -EINVAL;
}
/*
* Each WakeupGen register controls 32 interrupt.
* i.e. 1 bit per SPI IRQ
*/
*reg_index = spi_irq >> 5;
*bit_posn = spi_irq %= 32;
return 0;
}
static void _wakeupgen_clear(unsigned int irq, unsigned int cpu)
{
u32 val, bit_number;
u8 i;
if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
return;
val = wakeupgen_readl(i, cpu);
val &= ~BIT(bit_number);
wakeupgen_writel(val, i, cpu);
}
static void _wakeupgen_set(unsigned int irq, unsigned int cpu)
{
u32 val, bit_number;
u8 i;
if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
return;
val = wakeupgen_readl(i, cpu);
val |= BIT(bit_number);
wakeupgen_writel(val, i, cpu);
}
static void _wakeupgen_save_masks(unsigned int cpu)
{
u8 i;
for (i = 0; i < NR_REG_BANKS; i++)
per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
}
static void _wakeupgen_restore_masks(unsigned int cpu)
{
u8 i;
for (i = 0; i < NR_REG_BANKS; i++)
wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
}
/*
* Architecture specific Mask extension
*/
static void wakeupgen_mask(struct irq_data *d)
{
unsigned long flags;
spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
/*
* Architecture specific Unmask extension
*/
static void wakeupgen_unmask(struct irq_data *d)
{
unsigned long flags;
spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
/*
* Mask or unmask all interrupts on given CPU.
* 0 = Mask all interrupts on the 'cpu'
* 1 = Unmask all interrupts on the 'cpu'
* Ensure that the initial mask is maintained. This is faster than
* iterating through GIC registers to arrive at the correct masks.
*/
static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
{
unsigned long flags;
spin_lock_irqsave(&wakeupgen_lock, flags);
if (set) {
_wakeupgen_save_masks(cpu);
_wakeupgen_set_all(cpu, WKG_MASK_ALL);
} else {
_wakeupgen_set_all(cpu, WKG_UNMASK_ALL);
_wakeupgen_restore_masks(cpu);
}
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
#ifdef CONFIG_CPU_PM
/*
* Save WakeupGen interrupt context in SAR BANK3. Restore is done by
* ROM code. WakeupGen IP is integrated along with GIC to manage the
* interrupt wakeups from CPU low power states. It manages
* masking/unmasking of Shared peripheral interrupts(SPI). So the
* interrupt enable/disable control should be in sync and consistent
* at WakeupGen and GIC so that interrupts are not lost.
*/
static void irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
for (i = 0; i < NR_REG_BANKS; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 127 */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
/*
* Disable the secure interrupts for CPUx. The restore
* code blindly restores secure and non-secure interrupt
* masks from SAR RAM. Secure interrupts are not suppose
* to be enabled from HLOS. So overwrite the SAR location
* so that the secure interrupt remains disabled.
*/
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* Save AuxBoot* registers */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
/* Set the Backup Bit Mask status */
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
/*
* Clear WakeupGen SAR backup status.
*/
void irq_sar_clear(void)
{
u32 val;
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
/*
* Save GIC and Wakeupgen interrupt context using secure API
* for HS/EMU devices.
*/
static void irq_save_secure_context(void)
{
u32 ret;
ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
FLAG_START_CRITICAL,
0, 0, 0, 0, 0);
if (ret != API_HAL_RET_VALUE_OK)
pr_err("GIC and Wakeupgen context save failed\n");
}
#endif
#ifdef CONFIG_HOTPLUG_CPU
static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned int)hcpu;
switch (action) {
case CPU_ONLINE:
wakeupgen_irqmask_all(cpu, 0);
break;
case CPU_DEAD:
wakeupgen_irqmask_all(cpu, 1);
break;
}
return NOTIFY_OK;
}
static struct notifier_block __refdata irq_hotplug_notifier = {
.notifier_call = irq_cpu_hotplug_notify,
};
static void __init irq_hotplug_init(void)
{
register_hotcpu_notifier(&irq_hotplug_notifier);
}
#else
static void __init irq_hotplug_init(void)
{}
#endif
#ifdef CONFIG_CPU_PM
static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
switch (cmd) {
case CPU_CLUSTER_PM_ENTER:
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
irq_save_context();
else
irq_save_secure_context();
break;
case CPU_CLUSTER_PM_EXIT:
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
irq_sar_clear();
break;
}
return NOTIFY_OK;
}
static struct notifier_block irq_notifier_block = {
.notifier_call = irq_notifier,
};
static void __init irq_pm_init(void)
{
cpu_pm_register_notifier(&irq_notifier_block);
}
#else
static void __init irq_pm_init(void)
{}
#endif
/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < NR_REG_BANKS; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < NR_IRQS; i++)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
irq_pm_init();
return 0;
}
arch/arm/mach-omap2/omap4-common.c
浏览文件 @ b3c37522
......@@ -15,18 +15,73 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <plat/irqs.h>
#include <plat/sram.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
#include "common.h"
#include "omap4-sar-layout.h"
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2cache_base;
static void __iomem *l2cache_base;
#endif
static void __iomem *sar_ram_base;
#ifdef CONFIG_OMAP4_ERRATA_I688
/* Used to implement memory barrier on DRAM path */
#define OMAP4_DRAM_BARRIER_VA 0xfe600000
void __iomem *dram_sync, *sram_sync;
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
writel_relaxed(readl_relaxed(dram_sync), dram_sync);
writel_relaxed(readl_relaxed(sram_sync), sram_sync);
isb();
}
}
static int __init omap_barriers_init(void)
{
struct map_desc dram_io_desc[1];
phys_addr_t paddr;
u32 size;
if (!cpu_is_omap44xx())
return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = memblock_alloc(size, SZ_1M);
if (!paddr) {
pr_err("%s: failed to reserve 4 Kbytes\n", __func__);
return -ENOMEM;
}
memblock_free(paddr, size);
memblock_remove(paddr, size);
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
dram_io_desc[0].type = MT_MEMORY_SO;
iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
dram_sync = (void __iomem *) dram_io_desc[0].virtual;
sram_sync = (void __iomem *) OMAP4_SRAM_VA;
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
return 0;
}
core_initcall(omap_barriers_init);
#endif
void __init gic_init_irq(void)
......@@ -42,11 +97,18 @@ void __init gic_init_irq(void)
omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!omap_irq_base);
omap_wakeupgen_init();
gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
}
#ifdef CONFIG_CACHE_L2X0
void __iomem *omap4_get_l2cache_base(void)
{
return l2cache_base;
}
static void omap4_l2x0_disable(void)
{
/* Disable PL310 L2 Cache controller */
......@@ -72,7 +134,8 @@ static int __init omap_l2_cache_init(void)
/* Static mapping, never released */
l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
BUG_ON(!l2cache_base);
if (WARN_ON(!l2cache_base))
return -ENOMEM;
/*
* 16-way associativity, parity disabled
......@@ -112,3 +175,30 @@ static int __init omap_l2_cache_init(void)
}
early_initcall(omap_l2_cache_init);
#endif
void __iomem *omap4_get_sar_ram_base(void)
{
return sar_ram_base;
}
/*
* SAR RAM used to save and restore the HW
* context in low power modes
*/
static int __init omap4_sar_ram_init(void)
{
/*
* To avoid code running on other OMAPs in
* multi-omap builds
*/
if (!cpu_is_omap44xx())
return -ENOMEM;
/* Static mapping, never released */
sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
if (WARN_ON(!sar_ram_base))
return -ENOMEM;
return 0;
}
early_initcall(omap4_sar_ram_init);
arch/arm/mach-omap2/omap4-sar-layout.h 0 → 100644
浏览文件 @ b3c37522
/*
* omap4-sar-layout.h: OMAP4 SAR RAM layout header file
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef OMAP_ARCH_OMAP4_SAR_LAYOUT_H
#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
/*
* SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
*/
#define SAR_BANK1_OFFSET 0x0000
#define SAR_BANK2_OFFSET 0x1000
#define SAR_BANK3_OFFSET 0x2000
#define SAR_BANK4_OFFSET 0x3000
/* Scratch pad memory offsets from SAR_BANK1 */
#define SCU_OFFSET0 0xd00
#define SCU_OFFSET1 0xd04
#define OMAP_TYPE_OFFSET 0xd10
#define L2X0_SAVE_OFFSET0 0xd14
#define L2X0_SAVE_OFFSET1 0xd18
#define L2X0_AUXCTRL_OFFSET 0xd1c
#define L2X0_PREFETCH_CTRL_OFFSET 0xd20
/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
#define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08
#define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500)
#define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504)
#define SAR_SECRAM_SAVED_AT_OFFSET (SAR_BANK3_OFFSET + 0x508)
/* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */
#define WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x684)
#define WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x694)
#define WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6a4)
#define WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6b4)
#define AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x6c4)
#define AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x6c8)
#define PTMSYNCREQ_MASK_OFFSET (SAR_BANK3_OFFSET + 0x6cc)
#define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0)
#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
#endif
arch/arm/mach-omap2/omap_hwmod.c
浏览文件 @ b3c37522
......@@ -136,6 +136,7 @@
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include "common.h"
#include <plat/cpu.h>
......@@ -380,6 +381,51 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
return 0;
}
/**
* _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux
* @oh: struct omap_hwmod *
* @set_wake: bool value indicating to set (true) or clear (false) wakeup enable
*
* Set or clear the I/O pad wakeup flag in the mux entries for the
* hwmod @oh. This function changes the @oh->mux->pads_dynamic array
* in memory. If the hwmod is currently idled, and the new idle
* values don't match the previous ones, this function will also
* update the SCM PADCTRL registers. Otherwise, if the hwmod is not
* currently idled, this function won't touch the hardware: the new
* mux settings are written to the SCM PADCTRL registers when the
* hwmod is idled. No return value.
*/
static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
{
struct omap_device_pad *pad;
bool change = false;
u16 prev_idle;
int j;
if (!oh->mux || !oh->mux->enabled)
return;
for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
pad = oh->mux->pads_dynamic[j];
if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP))
continue;
prev_idle = pad->idle;
if (set_wake)
pad->idle |= OMAP_WAKEUP_EN;
else
pad->idle &= ~OMAP_WAKEUP_EN;
if (prev_idle != pad->idle)
change = true;
}
if (change && oh->_state == _HWMOD_STATE_IDLE)
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
}
/**
* _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
* @oh: struct omap_hwmod *
......@@ -1449,6 +1495,25 @@ static int _enable(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
/*
* hwmods with HWMOD_INIT_NO_IDLE flag set are left
* in enabled state at init.
* Now that someone is really trying to enable them,
* just ensure that the hwmod mux is set.
*/
if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
/*
* If the caller has mux data populated, do the mux'ing
* which wouldn't have been done as part of the _enable()
* done during setup.
*/
if (oh->mux)
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
return 0;
}
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_DISABLED) {
......@@ -1744,8 +1809,10 @@ static int _setup(struct omap_hwmod *oh, void *data)
* it should be set by the core code as a runtime flag during startup
*/
if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
(postsetup_state == _HWMOD_STATE_IDLE))
(postsetup_state == _HWMOD_STATE_IDLE)) {
oh->_int_flags |= _HWMOD_SKIP_ENABLE;
postsetup_state = _HWMOD_STATE_ENABLED;
}
if (postsetup_state == _HWMOD_STATE_IDLE)
_idle(oh);
......@@ -2416,6 +2483,7 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
v = oh->_sysc_cache;
_enable_wakeup(oh, &v);
_write_sysconfig(v, oh);
_set_idle_ioring_wakeup(oh, true);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
......@@ -2446,6 +2514,7 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
v = oh->_sysc_cache;
_disable_wakeup(oh, &v);
_write_sysconfig(v, oh);
_set_idle_ioring_wakeup(oh, false);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
......@@ -2662,3 +2731,57 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
return 0;
}
/**
* omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ
* @oh: struct omap_hwmod * containing hwmod mux entries
* @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup
* @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup
*
* When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux
* entry number @pad_idx for the hwmod @oh, trigger the interrupt
* service routine for the hwmod's mpu_irqs array index @irq_idx. If
* this function is not called for a given pad_idx, then the ISR
* associated with @oh's first MPU IRQ will be triggered when an I/O
* pad wakeup occurs on that pad. Note that @pad_idx is the index of
* the _dynamic or wakeup_ entry: if there are other entries not
* marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these
* entries are NOT COUNTED in the dynamic pad index. This function
* must be called separately for each pad that requires its interrupt
* to be re-routed this way. Returns -EINVAL if there is an argument
* problem or if @oh does not have hwmod mux entries or MPU IRQs;
* returns -ENOMEM if memory cannot be allocated; or 0 upon success.
*
* XXX This function interface is fragile. Rather than using array
* indexes, which are subject to unpredictable change, it should be
* using hwmod IRQ names, and some other stable key for the hwmod mux
* pad records.
*/
int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
{
int nr_irqs;
might_sleep();
if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 ||
pad_idx >= oh->mux->nr_pads_dynamic)
return -EINVAL;
/* Check the number of available mpu_irqs */
for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++)
;
if (irq_idx >= nr_irqs)
return -EINVAL;
if (!oh->mux->irqs) {
/* XXX What frees this? */
oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic,
GFP_KERNEL);
if (!oh->mux->irqs)
return -ENOMEM;
}
oh->mux->irqs[pad_idx] = irq_idx;
return 0;
}
arch/arm/mach-omap2/pm.h
浏览文件 @ b3c37522
......@@ -21,6 +21,7 @@ extern void omap_sram_idle(void);
extern int omap3_can_sleep(void);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
extern int omap4_idle_init(void);
#if defined(CONFIG_PM_OPP)
extern int omap3_opp_init(void);
......
arch/arm/mach-omap2/pm24xx.c
浏览文件 @ b3c37522
......@@ -30,7 +30,6 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
......@@ -127,27 +126,11 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
if (!console_trylock())
goto no_sleep;
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
/* Jump to SRAM suspend code */
omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_POWER));
omap_uart_resume_idle(2);
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
if (!is_suspending())
console_unlock();
no_sleep:
omap2_gpio_resume_after_idle();
......@@ -239,8 +222,6 @@ static int omap2_can_sleep(void)
{
if (omap2_fclks_active())
return 0;
if (!omap_uart_can_sleep())
return 0;
if (osc_ck->usecount > 1)
return 0;
if (omap_dma_running())
......@@ -291,7 +272,6 @@ static int omap2_pm_suspend(void)
mir1 = omap_readl(0x480fe0a4);
omap_writel(1 << 5, 0x480fe0ac);
omap_uart_prepare_suspend();
omap2_enter_full_retention();
omap_writel(mir1, 0x480fe0a4);
......
arch/arm/mach-omap2/pm34xx.c
浏览文件 @ b3c37522
......@@ -28,7 +28,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <trace/events/power.h>
#include <asm/suspend.h>
......@@ -36,7 +35,6 @@
#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
#include <plat/gpmc.h>
......@@ -54,15 +52,6 @@
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
{
return false;
}
#endif
/* pm34xx errata defined in pm.h */
......@@ -195,7 +184,7 @@ static void omap3_save_secure_ram_context(void)
* that any peripheral wake-up events occurring while attempting to
* clear the PM_WKST_x are detected and cleared.
*/
static int prcm_clear_mod_irqs(s16 module, u8 regs)
static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
{
u32 wkst, fclk, iclk, clken;
u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
......@@ -207,6 +196,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
wkst &= ~ignore_bits;
if (wkst) {
iclk = omap2_cm_read_mod_reg(module, iclk_off);
fclk = omap2_cm_read_mod_reg(module, fclk_off);
......@@ -222,6 +212,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
omap2_prm_write_mod_reg(wkst, module, wkst_off);
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= ~ignore_bits;
c++;
}
omap2_cm_write_mod_reg(iclk, module, iclk_off);
......@@ -231,76 +222,35 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
return c;
}
static int _prcm_int_handle_wakeup(void)
static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
c = prcm_clear_mod_irqs(WKUP_MOD, 1);
c += prcm_clear_mod_irqs(CORE_MOD, 1);
c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
if (omap_rev() > OMAP3430_REV_ES1_0) {
c += prcm_clear_mod_irqs(CORE_MOD, 3);
c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
}
c = prcm_clear_mod_irqs(WKUP_MOD, 1,
~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
return c;
return c ? IRQ_HANDLED : IRQ_NONE;
}
/*
* PRCM Interrupt Handler
*
* The PRM_IRQSTATUS_MPU register indicates if there are any pending
* interrupts from the PRCM for the MPU. These bits must be cleared in
* order to clear the PRCM interrupt. The PRCM interrupt handler is
* implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
* the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
* register indicates that a wake-up event is pending for the MPU and
* this bit can only be cleared if the all the wake-up events latched
* in the various PM_WKST_x registers have been cleared. The interrupt
* handler is implemented using a do-while loop so that if a wake-up
* event occurred during the processing of the prcm interrupt handler
* (setting a bit in the corresponding PM_WKST_x register and thus
* preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
* this would be handled.
*/
static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
{
u32 irqenable_mpu, irqstatus_mpu;
int c = 0;
irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
irqstatus_mpu &= irqenable_mpu;
do {
if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
OMAP3430_IO_ST_MASK)) {
c = _prcm_int_handle_wakeup();
/*
* Is the MPU PRCM interrupt handler racing with the
* IVA2 PRCM interrupt handler ?
*/
WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
"but no wakeup sources are marked\n");
} else {
/* XXX we need to expand our PRCM interrupt handler */
WARN(1, "prcm: WARNING: PRCM interrupt received, but "
"no code to handle it (%08x)\n", irqstatus_mpu);
}
omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
irqstatus_mpu &= irqenable_mpu;
int c;
} while (irqstatus_mpu);
/*
* Clear all except ST_IO and ST_IO_CHAIN for wkup module,
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
c = prcm_clear_mod_irqs(WKUP_MOD, 1,
OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
}
return IRQ_HANDLED;
return c ? IRQ_HANDLED : IRQ_NONE;
}
static void omap34xx_save_context(u32 *save)
......@@ -376,20 +326,11 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
if (per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)
if (!console_trylock())
goto console_still_active;
pwrdm_pre_transition();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
......@@ -397,8 +338,6 @@ void omap_sram_idle(void)
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
......@@ -447,8 +386,6 @@ void omap_sram_idle(void)
omap3_sram_restore_context();
omap2_sms_restore_context();
}
omap_uart_resume_idle(0);
omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
......@@ -464,14 +401,8 @@ void omap_sram_idle(void)
omap2_gpio_resume_after_idle();
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
omap_uart_resume_idle(2);
omap_uart_resume_idle(3);
}
if (!is_suspending())
console_unlock();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
......@@ -485,21 +416,11 @@ void omap_sram_idle(void)
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
int omap3_can_sleep(void)
{
if (!omap_uart_can_sleep())
return 0;
return 1;
}
static void omap3_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (!omap3_can_sleep())
goto out;
if (omap_irq_pending() || need_resched())
goto out;
......@@ -533,7 +454,6 @@ static int omap3_pm_suspend(void)
goto restore;
}
omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
......@@ -580,22 +500,27 @@ static int omap3_pm_begin(suspend_state_t state)
{
disable_hlt();
suspend_state = state;
omap_uart_enable_irqs(0);
omap_prcm_irq_prepare();
return 0;
}
static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
omap_uart_enable_irqs(1);
enable_hlt();
return;
}
static void omap3_pm_finish(void)
{
omap_prcm_irq_complete();
}
static const struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
.enter = omap3_pm_enter,
.finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
......@@ -701,10 +626,6 @@ static void __init prcm_setup_regs(void)
OMAP3430_GRPSEL_GPT1_MASK |
OMAP3430_GRPSEL_GPT12_MASK,
WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
/* For some reason IO doesn't generate wakeup event even if
* it is selected to mpu wakeup goup */
omap2_prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
......@@ -881,12 +802,21 @@ static int __init omap3_pm_init(void)
* supervised mode for powerdomains */
prcm_setup_regs();
ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
(irq_handler_t)prcm_interrupt_handler,
IRQF_DISABLED, "prcm", NULL);
ret = request_irq(omap_prcm_event_to_irq("wkup"),
_prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
if (ret) {
pr_err("pm: Failed to request pm_wkup irq\n");
goto err1;
}
/* IO interrupt is shared with mux code */
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
if (ret) {
printk(KERN_ERR "request_irq failed to register for 0x%x\n",
INT_34XX_PRCM_MPU_IRQ);
pr_err("pm: Failed to request pm_io irq\n");
goto err1;
}
......
arch/arm/mach-omap2/pm44xx.c
浏览文件 @ b3c37522
/*
* OMAP4 Power Management Routines
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010-2011 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -17,13 +18,16 @@
#include <linux/slab.h>
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
#include "pm.h"
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
#ifdef CONFIG_SUSPEND
u32 saved_state;
u32 saved_logic_state;
#endif
struct list_head node;
};
......@@ -33,7 +37,50 @@ static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
static int omap4_pm_suspend(void)
{
do_wfi();
struct power_state *pwrst;
int state, ret = 0;
u32 cpu_id = smp_processor_id();
/* Save current powerdomain state */
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
}
/* Set targeted power domain states by suspend */
list_for_each_entry(pwrst, &pwrst_list, node) {
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
}
/*
* For MPUSS to hit power domain retention(CSWR or OSWR),
* CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
* since CPU power domain CSWR is not supported by hardware
* Only master CPU follows suspend path. All other CPUs follow
* CPU hotplug path in system wide suspend. On OMAP4, CPU power
* domain CSWR is not supported by hardware.
* More details can be found in OMAP4430 TRM section 4.3.4.2.
*/
omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
/* Restore next powerdomain state */
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
pr_info("Powerdomain (%s) didn't enter "
"target state %d\n",
pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
}
if (ret)
pr_crit("Could not enter target state in pm_suspend\n");
else
pr_info("Successfully put all powerdomains to target state\n");
return 0;
}
......@@ -73,6 +120,22 @@ static const struct platform_suspend_ops omap_pm_ops = {
};
#endif /* CONFIG_SUSPEND */
/*
* Enable hardware supervised mode for all clockdomains if it's
* supported. Initiate sleep transition for other clockdomains, if
* they are not used
*/
static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
clkdm_allow_idle(clkdm);
else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
atomic_read(&clkdm->usecount) == 0)
clkdm_sleep(clkdm);
return 0;
}
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
{
struct power_state *pwrst;
......@@ -80,14 +143,48 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
if (!pwrdm->pwrsts)
return 0;
/*
* Skip CPU0 and CPU1 power domains. CPU1 is programmed
* through hotplug path and CPU0 explicitly programmed
* further down in the code path
*/
if (!strncmp(pwrdm->name, "cpu", 3))
return 0;
/*
* FIXME: Remove this check when core retention is supported
* Only MPUSS power domain is added in the list.
*/
if (strcmp(pwrdm->name, "mpu_pwrdm"))
return 0;
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
pwrst->next_state = PWRDM_POWER_ON;
pwrst->next_state = PWRDM_POWER_RET;
list_add(&pwrst->node, &pwrst_list);
return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state);
return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
/**
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
* with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* by secondary CPU with CONFIG_CPUIDLE.
*/
static void omap_default_idle(void)
{
local_irq_disable();
local_fiq_disable();
omap_do_wfi();
local_fiq_enable();
local_irq_enable();
}
/**
......@@ -99,10 +196,17 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
static int __init omap4_pm_init(void)
{
int ret;
struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
if (!cpu_is_omap44xx())
return -ENODEV;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
return -ENODEV;
}
pr_err("Power Management for TI OMAP4.\n");
ret = pwrdm_for_each(pwrdms_setup, NULL);
......@@ -111,10 +215,51 @@ static int __init omap4_pm_init(void)
goto err2;
}
/*
* The dynamic dependency between MPUSS -> MEMIF and
* MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
* expected. The hardware recommendation is to enable static
* dependencies for these to avoid system lock ups or random crashes.
*/
mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
emif_clkdm = clkdm_lookup("l3_emif_clkdm");
l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
ducati_clkdm = clkdm_lookup("ducati_clkdm");
if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
goto err2;
ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
if (ret) {
pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
"wakeup dependency\n");
goto err2;
}
ret = omap4_mpuss_init();
if (ret) {
pr_err("Failed to initialise OMAP4 MPUSS\n");
goto err2;
}
(void) clkdm_for_each(clkdms_setup, NULL);
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
/* Overwrite the default arch_idle() */
pm_idle = omap_default_idle;
omap4_idle_init();
err2:
return ret;
}
......
arch/arm/mach-omap2/prcm-common.h
浏览文件 @ b3c37522
......@@ -4,7 +4,7 @@
/*
* OMAP2/3 PRCM base and module definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
......@@ -410,6 +410,79 @@
extern void __iomem *prm_base;
extern void __iomem *cm_base;
extern void __iomem *cm2_base;
/**
* struct omap_prcm_irq - describes a PRCM interrupt bit
* @name: a short name describing the interrupt type, e.g. "wkup" or "io"
* @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs
* @priority: should this interrupt be handled before @priority=false IRQs?
*
* Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers.
* On systems with multiple PRM MPU IRQ registers, the bitfields read from
* the registers are concatenated, so @offset could be > 31 on these systems -
* see omap_prm_irq_handler() for more details. I/O ring interrupts should
* have @priority set to true.
*/
struct omap_prcm_irq {
const char *name;
unsigned int offset;
bool priority;
};
/**
* struct omap_prcm_irq_setup - PRCM interrupt controller details
* @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
* @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
* @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
* @nr_irqs: number of entries in the @irqs array
* @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
* @irq: MPU IRQ asserted when a PRCM interrupt arrives
* @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending
* @ocp_barrier: fn ptr to force buffered PRM writes to complete
* @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
* @restore_irqen: fn ptr to save and clear IRQENABLE regs
* @saved_mask: IRQENABLE regs are saved here during suspend
* @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
* @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
* @suspended: set to true after Linux suspend code has called our ->prepare()
* @suspend_save_flag: set to true after IRQ masks have been saved and disabled
*
* @saved_mask, @priority_mask, @base_irq, @suspended, and
* @suspend_save_flag are populated dynamically, and are not to be
* specified in static initializers.
*/
struct omap_prcm_irq_setup {
u16 ack;
u16 mask;
u8 nr_regs;
u8 nr_irqs;
const struct omap_prcm_irq *irqs;
int irq;
void (*read_pending_irqs)(unsigned long *events);
void (*ocp_barrier)(void);
void (*save_and_clear_irqen)(u32 *saved_mask);
void (*restore_irqen)(u32 *saved_mask);
u32 *saved_mask;
u32 *priority_mask;
int base_irq;
bool suspended;
bool suspend_save_flag;
};
/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */
#define OMAP_PRCM_IRQ(_name, _offset, _priority) { \
.name = _name, \
.offset = _offset, \
.priority = _priority \
}
extern void omap_prcm_irq_cleanup(void);
extern int omap_prcm_register_chain_handler(
struct omap_prcm_irq_setup *irq_setup);
extern int omap_prcm_event_to_irq(const char *event);
extern void omap_prcm_irq_prepare(void);
extern void omap_prcm_irq_complete(void);
# endif
#endif
......
arch/arm/mach-omap2/prm2xxx_3xxx.c
浏览文件 @ b3c37522
/*
* OMAP2/3 PRM module functions
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010-2011 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
......@@ -27,6 +27,24 @@
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
.irq = INT_34XX_PRCM_MPU_IRQ,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
.restore_irqen = &omap3xxx_prm_restore_irqen,
};
u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(prm_base + module + idx);
......@@ -212,3 +230,80 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
{
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
}
/**
* omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
* @events: ptr to a u32, preallocated by caller
*
* Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
* MPU IRQs, and store the result into the u32 pointed to by @events.
* No return value.
*/
void omap3xxx_prm_read_pending_irqs(unsigned long *events)
{
u32 mask, st;
/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
events[0] = mask & st;
}
/**
* omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
*
* Force any buffered writes to the PRM IP block to complete. Needed
* by the PRM IRQ handler, which reads and writes directly to the IP
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
void omap3xxx_prm_ocp_barrier(void)
{
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
*
* Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
* must be allocated by the caller. Intended to be used in the PRM
* interrupt handler suspend callback. The OCP barrier is needed to
* ensure the write to disable PRM interrupts reaches the PRM before
* returning; otherwise, spurious interrupts might occur. No return
* value.
*/
void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* OCP barrier */
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
*
* Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
* to be used in the PRM interrupt handler resume callback to restore
* values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
* barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
void omap3xxx_prm_restore_irqen(u32 *saved_mask)
{
omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
}
static int __init omap3xxx_prcm_init(void)
{
if (cpu_is_omap34xx())
return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
return 0;
}
subsys_initcall(omap3xxx_prcm_init);
arch/arm/mach-omap2/prm2xxx_3xxx.h
浏览文件 @ b3c37522
/*
* OMAP2/3 Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
......@@ -314,6 +314,13 @@ void omap3_prm_vp_clear_txdone(u8 vp_id);
extern u32 omap3_prm_vcvp_read(u8 offset);
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
/* PRM interrupt-related functions */
extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
#endif /* CONFIG_ARCH_OMAP4 */
#endif
......
arch/arm/mach-omap2/prm44xx.c
浏览文件 @ b3c37522
......@@ -27,6 +27,24 @@
#include "prcm44xx.h"
#include "prminst44xx.h"
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
.ack = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
.mask = OMAP4_PRM_IRQENABLE_MPU_OFFSET,
.nr_regs = 2,
.irqs = omap4_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap4_prcm_irqs),
.irq = OMAP44XX_IRQ_PRCM,
.read_pending_irqs = &omap44xx_prm_read_pending_irqs,
.ocp_barrier = &omap44xx_prm_ocp_barrier,
.save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen,
.restore_irqen = &omap44xx_prm_restore_irqen,
};
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
......@@ -121,3 +139,101 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
OMAP4430_PRM_DEVICE_INST,
offset);
}
static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
{
u32 mask, st;
/* XXX read mask from RAM? */
mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
return mask & st;
}
/**
* omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
* @events: ptr to two consecutive u32s, preallocated by caller
*
* Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM
* MPU IRQs, and store the result into the two u32s pointed to by @events.
* No return value.
*/
void omap44xx_prm_read_pending_irqs(unsigned long *events)
{
events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
}
/**
* omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
*
* Force any buffered writes to the PRM IP block to complete. Needed
* by the PRM IRQ handler, which reads and writes directly to the IP
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
void omap44xx_prm_ocp_barrier(void)
{
omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
OMAP4_REVISION_PRM_OFFSET);
}
/**
* omap44xx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU* regs
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
*
* Save the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers to
* @saved_mask. @saved_mask must be allocated by the caller.
* Intended to be used in the PRM interrupt handler suspend callback.
* The OCP barrier is needed to ensure the write to disable PRM
* interrupts reaches the PRM before returning; otherwise, spurious
* interrupts might occur. No return value.
*/
void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] =
omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
saved_mask[1] =
omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
/* OCP barrier */
omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
OMAP4_REVISION_PRM_OFFSET);
}
/**
* omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
*
* Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from
* @saved_mask. Intended to be used in the PRM interrupt handler resume
* callback to restore values saved by omap44xx_prm_save_and_clear_irqen().
* No OCP barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
void omap44xx_prm_restore_irqen(u32 *saved_mask)
{
omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST,
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST,
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
}
static int __init omap4xxx_prcm_init(void)
{
if (cpu_is_omap44xx())
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
return 0;
}
subsys_initcall(omap4xxx_prcm_init);
arch/arm/mach-omap2/prm44xx.h
浏览文件 @ b3c37522
/*
* OMAP44xx PRM instance offset macros
*
* Copyright (C) 2009-2010 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
......@@ -763,6 +763,12 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
/* PRM interrupt-related functions */
extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
extern void omap44xx_prm_ocp_barrier(void);
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
# endif
#endif
arch/arm/mach-omap2/prm_common.c 0 → 100644
浏览文件 @ b3c37522
/*
* OMAP2+ common Power & Reset Management (PRM) IP block functions
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*
* For historical purposes, the API used to configure the PRM
* interrupt handler refers to it as the "PRCM interrupt." The
* underlying registers are located in the PRM on OMAP3/4.
*
* XXX This code should eventually be moved to a PRM driver.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <mach/system.h>
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
/*
* OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
* XXX this is technically not needed, since
* omap_prcm_register_chain_handler() could allocate this based on the
* actual amount of memory needed for the SoC
*/
#define OMAP_PRCM_MAX_NR_PENDING_REG 2
/*
* prcm_irq_chips: an array of all of the "generic IRQ chips" in use
* by the PRCM interrupt handler code. There will be one 'chip' per
* PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have
* one "chip" and OMAP4 will have two.)
*/
static struct irq_chip_generic **prcm_irq_chips;
/*
* prcm_irq_setup: the PRCM IRQ parameters for the hardware the code
* is currently running on. Defined and passed by initialization code
* that calls omap_prcm_register_chain_handler().
*/
static struct omap_prcm_irq_setup *prcm_irq_setup;
/* Private functions */
/*
* Move priority events from events to priority_events array
*/
static void omap_prcm_events_filter_priority(unsigned long *events,
unsigned long *priority_events)
{
int i;
for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
priority_events[i] =
events[i] & prcm_irq_setup->priority_mask[i];
events[i] ^= priority_events[i];
}
}
/*
* PRCM Interrupt Handler
*
* This is a common handler for the OMAP PRCM interrupts. Pending
* interrupts are detected by a call to prcm_pending_events and
* dispatched accordingly. Clearing of the wakeup events should be
* done by the SoC specific individual handlers.
*/
static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int virtirq;
int nr_irqs = prcm_irq_setup->nr_regs * 32;
/*
* If we are suspended, mask all interrupts from PRCM level,
* this does not ack them, and they will be pending until we
* re-enable the interrupts, at which point the
* omap_prcm_irq_handler will be executed again. The
* _save_and_clear_irqen() function must ensure that the PRM
* write to disable all IRQs has reached the PRM before
* returning, or spurious PRCM interrupts may occur during
* suspend.
*/
if (prcm_irq_setup->suspended) {
prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask);
prcm_irq_setup->suspend_save_flag = true;
}
/*
* Loop until all pending irqs are handled, since
* generic_handle_irq() can cause new irqs to come
*/
while (!prcm_irq_setup->suspended) {
prcm_irq_setup->read_pending_irqs(pending);
/* No bit set, then all IRQs are handled */
if (find_first_bit(pending, nr_irqs) >= nr_irqs)
break;
omap_prcm_events_filter_priority(pending, priority_pending);
/*
* Loop on all currently pending irqs so that new irqs
* cannot starve previously pending irqs
*/
/* Serve priority events first */
for_each_set_bit(virtirq, priority_pending, nr_irqs)
generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
/* Serve normal events next */
for_each_set_bit(virtirq, pending, nr_irqs)
generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
}
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
chip->irq_unmask(&desc->irq_data);
prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */
}
/* Public functions */
/**
* omap_prcm_event_to_irq - given a PRCM event name, returns the
* corresponding IRQ on which the handler should be registered
* @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq
*
* Returns the Linux internal IRQ ID corresponding to @name upon success,
* or -ENOENT upon failure.
*/
int omap_prcm_event_to_irq(const char *name)
{
int i;
if (!prcm_irq_setup || !name)
return -ENOENT;
for (i = 0; i < prcm_irq_setup->nr_irqs; i++)
if (!strcmp(prcm_irq_setup->irqs[i].name, name))
return prcm_irq_setup->base_irq +
prcm_irq_setup->irqs[i].offset;
return -ENOENT;
}
/**
* omap_prcm_irq_cleanup - reverses memory allocated and other steps
* done by omap_prcm_register_chain_handler()
*
* No return value.
*/
void omap_prcm_irq_cleanup(void)
{
int i;
if (!prcm_irq_setup) {
pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");
return;
}
if (prcm_irq_chips) {
for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
if (prcm_irq_chips[i])
irq_remove_generic_chip(prcm_irq_chips[i],
0xffffffff, 0, 0);
prcm_irq_chips[i] = NULL;
}
kfree(prcm_irq_chips);
prcm_irq_chips = NULL;
}
kfree(prcm_irq_setup->saved_mask);
prcm_irq_setup->saved_mask = NULL;
kfree(prcm_irq_setup->priority_mask);
prcm_irq_setup->priority_mask = NULL;
irq_set_chained_handler(prcm_irq_setup->irq, NULL);
if (prcm_irq_setup->base_irq > 0)
irq_free_descs(prcm_irq_setup->base_irq,
prcm_irq_setup->nr_regs * 32);
prcm_irq_setup->base_irq = 0;
}
void omap_prcm_irq_prepare(void)
{
prcm_irq_setup->suspended = true;
}
void omap_prcm_irq_complete(void)
{
prcm_irq_setup->suspended = false;
/* If we have not saved the masks, do not attempt to restore */
if (!prcm_irq_setup->suspend_save_flag)
return;
prcm_irq_setup->suspend_save_flag = false;
/*
* Re-enable all masked PRCM irq sources, this causes the PRCM
* interrupt to fire immediately if the events were masked
* previously in the chain handler
*/
prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
}
/**
* omap_prcm_register_chain_handler - initializes the prcm chained interrupt
* handler based on provided parameters
* @irq_setup: hardware data about the underlying PRM/PRCM
*
* Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up
* one generic IRQ chip per PRM interrupt status/enable register pair.
* Returns 0 upon success, -EINVAL if called twice or if invalid
* arguments are passed, or -ENOMEM on any other error.
*/
int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
{
int nr_regs = irq_setup->nr_regs;
u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
int offset, i;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
if (!irq_setup)
return -EINVAL;
if (prcm_irq_setup) {
pr_err("PRCM: already initialized; won't reinitialize\n");
return -EINVAL;
}
if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) {
pr_err("PRCM: nr_regs too large\n");
return -EINVAL;
}
prcm_irq_setup = irq_setup;
prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL);
prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL);
prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs,
GFP_KERNEL);
if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
!prcm_irq_setup->priority_mask) {
pr_err("PRCM: kzalloc failed\n");
goto err;
}
memset(mask, 0, sizeof(mask));
for (i = 0; i < irq_setup->nr_irqs; i++) {
offset = irq_setup->irqs[i].offset;
mask[offset >> 5] |= 1 << (offset & 0x1f);
if (irq_setup->irqs[i].priority)
irq_setup->priority_mask[offset >> 5] |=
1 << (offset & 0x1f);
}
irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
0);
if (irq_setup->base_irq < 0) {
pr_err("PRCM: failed to allocate irq descs: %d\n",
irq_setup->base_irq);
goto err;
}
for (i = 0; i <= irq_setup->nr_regs; i++) {
gc = irq_alloc_generic_chip("PRCM", 1,
irq_setup->base_irq + i * 32, prm_base,
handle_level_irq);
if (!gc) {
pr_err("PRCM: failed to allocate generic chip\n");
goto err;
}
ct = gc->chip_types;
ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->regs.ack = irq_setup->ack + i * 4;
ct->regs.mask = irq_setup->mask + i * 4;
irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0);
prcm_irq_chips[i] = gc;
}
return 0;
err:
omap_prcm_irq_cleanup();
return -ENOMEM;
}
arch/arm/mach-omap2/serial.c
浏览文件 @ b3c37522
此差异已折叠。
arch/arm/mach-omap2/sleep44xx.S 0 → 100644
浏览文件 @ b3c37522
此差异已折叠。
arch/arm/plat-mxc/include/mach/common.h
浏览文件 @ b3c37522
......@@ -131,6 +131,12 @@ extern void imx53_evk_common_init(void);
extern void imx53_qsb_common_init(void);
extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_pm_init(void);
extern void imx6q_clock_map_io(void);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
#endif
#endif
arch/arm/plat-mxc/tzic.c
浏览文件 @ b3c37522
此差异已折叠。
arch/arm/plat-omap/common.c
浏览文件 @ b3c37522
此差异已折叠。
arch/arm/plat-omap/include/plat/omap-secure.h 0 → 100644
浏览文件 @ b3c37522
此差异已折叠。
arch/arm/plat-omap/include/plat/omap44xx.h
浏览文件 @ b3c37522
......@@ -45,6 +45,7 @@
#define OMAP44XX_WKUPGEN_BASE 0x48281000
#define OMAP44XX_MCPDM_BASE 0x40132000
#define OMAP44XX_MCPDM_L3_BASE 0x49032000
#define OMAP44XX_SAR_RAM_BASE 0x4a326000
#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
......
arch/arm/plat-omap/sram.c
浏览文件 @ b3c37522
此差异已折叠。
drivers/tty/serial/omap-serial.c
浏览文件 @ b3c37522
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或