Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 b370b082 编写于 作者: P Paul Mackerras
浏览文件
操作

Merge branch 'for-2.6.25' of... 

Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
上级 75e89b02 7e25867f
隐藏空白更改
内联 并排
Showing with 190 addition and 174 deletion
arch/powerpc/boot/dts/adder875-redboot.dts
浏览文件 @ b370b082
......@@ -151,6 +151,7 @@
compatible = "fsl,mpc875-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
clock-frequency = <50000000>;
reg = <0x9f0 0x10>;
};
......
arch/powerpc/boot/dts/adder875-uboot.dts
浏览文件 @ b370b082
......@@ -150,6 +150,7 @@
compatible = "fsl,mpc875-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
clock-frequency = <50000000>;
reg = <0x9f0 0x10>;
};
......
arch/powerpc/boot/dts/mpc8313erdb.dts
浏览文件 @ b370b082
......@@ -118,6 +118,10 @@
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
i2c@3100 {
......
arch/powerpc/boot/dts/mpc8315erdb.dts
浏览文件 @ b370b082
......@@ -96,7 +96,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
compatible = "fsl,mpc8315-immr", "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
......
arch/powerpc/boot/dts/mpc834x_mds.dts
浏览文件 @ b370b082
......@@ -332,7 +332,7 @@
0xc000 0x0 0x0 0x3 &ipic 23 0x8
0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
interrupts = <67 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
......
arch/powerpc/boot/dts/mpc8572ds.dts
浏览文件 @ b370b082
......@@ -42,6 +42,18 @@
bus-frequency = <0>;
clock-frequency = <0>;
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <1>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
......
arch/powerpc/boot/dts/mpc885ads.dts
浏览文件 @ b370b082
......@@ -166,6 +166,7 @@
compatible = "fsl,mpc885-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
clock-frequency = <0>;
reg = <9f0 10>;
};
......
arch/powerpc/boot/dts/storcenter.dts
浏览文件 @ b370b082
......@@ -15,7 +15,7 @@
/ {
model = "StorCenter";
compatible = "storcenter";
compatible = "iomega,storcenter";
#address-cells = <1>;
#size-cells = <1>;
......@@ -62,12 +62,12 @@
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <5 2>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
rtc@68 {
compatible = "dallas,ds1337";
reg = <68>;
reg = <0x68>;
};
};
......@@ -78,7 +78,7 @@
reg = <0x4500 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <115200>;
interrupts = <9 2>;
interrupts = <25 2>;
interrupt-parent = <&mpic>;
};
......@@ -89,7 +89,7 @@
reg = <0x4600 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <9600>;
interrupts = <10 2>;
interrupts = <26 2>;
interrupt-parent = <&mpic>;
};
......@@ -136,6 +136,6 @@
};
chosen {
linux,stdout-path = "/soc/serial@4500";
linux,stdout-path = &serial0;
};
};
arch/powerpc/configs/mpc83xx_defconfig
浏览文件 @ b370b082
......@@ -186,7 +186,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
......@@ -416,14 +416,14 @@ CONFIG_PHYLIB=y
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
......@@ -436,7 +436,7 @@ CONFIG_MII=y
CONFIG_NETDEV_1000=y
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
# CONFIG_UCC_GETH is not set
CONFIG_UCC_GETH=y
CONFIG_NETDEV_10000=y
#
......
arch/powerpc/kernel/cputable.c
浏览文件 @ b370b082
......@@ -959,6 +959,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e300",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.platform = "ppc603",
},
{ /* e300c4 (e300c1, plus one IU) */
......@@ -971,6 +974,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
.machine_check = machine_check_generic,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e300",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.platform = "ppc603",
},
{ /* default match, we assume split I/D cache & TB (non-601)... */
......@@ -1435,7 +1441,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 32,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
.oprofile_type = PPC_OPROFILE_BOOKE,
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.machine_check = machine_check_e500,
.platform = "ppc8540",
},
......@@ -1453,7 +1459,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 32,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
.oprofile_type = PPC_OPROFILE_BOOKE,
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.machine_check = machine_check_e500,
.platform = "ppc8548",
},
......
arch/powerpc/kernel/pmc.c
浏览文件 @ b370b082
......@@ -26,7 +26,7 @@
static void dummy_perf(struct pt_regs *regs)
{
#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200)
#if defined(CONFIG_FSL_EMB_PERFMON)
mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE);
#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx)
if (cur_cpu_spec->pmc_type == PPC_PMC_IBM)
......
arch/powerpc/oprofile/Makefile
浏览文件 @ b370b082
......@@ -15,5 +15,5 @@ oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
cell/spu_profiler.o cell/vma_map.o \
cell/spu_task_sync.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
oprofile-$(CONFIG_6xx) += op_model_7450.o
arch/powerpc/oprofile/common.c
浏览文件 @ b370b082
......@@ -202,9 +202,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
model = &op_model_7450;
break;
#endif
#ifdef CONFIG_FSL_BOOKE
case PPC_OPROFILE_BOOKE:
model = &op_model_fsl_booke;
#if defined(CONFIG_FSL_EMB_PERFMON)
case PPC_OPROFILE_FSL_EMB:
model = &op_model_fsl_emb;
break;
#endif
default:
......
arch/powerpc/oprofile/op_model_fsl_booke.c → arch/powerpc/oprofile/op_model_fsl_emb.c
浏览文件 @ b370b082
/*
* arch/powerpc/oprofile/op_model_fsl_booke.c
*
* Freescale Book-E oprofile support, based on ppc64 oprofile support
* Freescale Embedded oprofile support, based on ppc64 oprofile support
* Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
*
* Copyright (c) 2004 Freescale Semiconductor, Inc
......@@ -22,7 +20,7 @@
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/reg_booke.h>
#include <asm/reg_fsl_emb.h>
#include <asm/page.h>
#include <asm/pmc.h>
#include <asm/oprofile_impl.h>
......@@ -244,7 +242,7 @@ static void dump_pmcs(void)
mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
}
static int fsl_booke_cpu_setup(struct op_counter_config *ctr)
static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
{
int i;
......@@ -262,7 +260,7 @@ static int fsl_booke_cpu_setup(struct op_counter_config *ctr)
return 0;
}
static int fsl_booke_reg_setup(struct op_counter_config *ctr,
static int fsl_emb_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
int num_ctrs)
{
......@@ -281,7 +279,7 @@ static int fsl_booke_reg_setup(struct op_counter_config *ctr,
return 0;
}
static int fsl_booke_start(struct op_counter_config *ctr)
static int fsl_emb_start(struct op_counter_config *ctr)
{
int i;
......@@ -315,7 +313,7 @@ static int fsl_booke_start(struct op_counter_config *ctr)
return 0;
}
static void fsl_booke_stop(void)
static void fsl_emb_stop(void)
{
/* freeze counters */
pmc_stop_ctrs();
......@@ -329,7 +327,7 @@ static void fsl_booke_stop(void)
}
static void fsl_booke_handle_interrupt(struct pt_regs *regs,
static void fsl_emb_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned long pc;
......@@ -362,10 +360,10 @@ static void fsl_booke_handle_interrupt(struct pt_regs *regs,
pmc_start_ctrs(1);
}
struct op_powerpc_model op_model_fsl_booke = {
.reg_setup = fsl_booke_reg_setup,
.cpu_setup = fsl_booke_cpu_setup,
.start = fsl_booke_start,
.stop = fsl_booke_stop,
.handle_interrupt = fsl_booke_handle_interrupt,
struct op_powerpc_model op_model_fsl_emb = {
.reg_setup = fsl_emb_reg_setup,
.cpu_setup = fsl_emb_cpu_setup,
.start = fsl_emb_start,
.stop = fsl_emb_stop,
.handle_interrupt = fsl_emb_handle_interrupt,
};
arch/powerpc/platforms/83xx/mpc832x_rdb.c
浏览文件 @ b370b082
......@@ -101,7 +101,7 @@ static void __init mpc832x_rdb_setup_arch(void)
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
......
arch/powerpc/platforms/83xx/mpc83xx.h
浏览文件 @ b370b082
......@@ -14,6 +14,8 @@
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
#define MPC8315_SCCR_USB_MASK 0x00c00000
#define MPC8315_SCCR_USB_DRCM_11 0x00c00000
#define MPC837X_SCCR_USB_DRCM_11 0x00c00000
/* system i/o configuration register low */
......
arch/powerpc/platforms/83xx/usb.c
浏览文件 @ b370b082
......@@ -104,6 +104,7 @@ int mpc831x_usb_cfg(void)
u32 temp;
void __iomem *immap, *usb_regs;
struct device_node *np = NULL;
struct device_node *immr_node = NULL;
const void *prop;
struct resource res;
int ret = 0;
......@@ -124,10 +125,15 @@ int mpc831x_usb_cfg(void)
}
/* Configure clock */
temp = in_be32(immap + MPC83XX_SCCR_OFFS);
temp &= ~MPC83XX_SCCR_USB_MASK;
temp |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
out_be32(immap + MPC83XX_SCCR_OFFS, temp);
immr_node = of_get_parent(np);
if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
MPC8315_SCCR_USB_MASK,
MPC8315_SCCR_USB_DRCM_11);
else
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
MPC83XX_SCCR_USB_MASK,
MPC83XX_SCCR_USB_DRCM_11);
/* Configure pin mux for ULPI. There is no pin mux for UTMI */
if (prop && !strcmp(prop, "ulpi")) {
......@@ -144,6 +150,9 @@ int mpc831x_usb_cfg(void)
iounmap(immap);
if (immr_node)
of_node_put(immr_node);
/* Map USB SOC space */
ret = of_address_to_resource(np, 0, &res);
if (ret) {
......
arch/powerpc/platforms/8xx/adder875.c
浏览文件 @ b370b082
......@@ -15,12 +15,12 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/commproc.h>
#include <asm/cpm1.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
#include <asm/prom.h>
#include <sysdev/commproc.h>
#include "mpc8xx.h"
struct cpm_pin {
int port, pin, flags;
......@@ -108,7 +108,7 @@ define_machine(adder875) {
.name = "Adder MPC875",
.probe = adder875_probe,
.setup_arch = adder875_setup,
.init_IRQ = m8xx_pic_init,
.init_IRQ = mpc8xx_pics_init,
.get_irq = mpc8xx_get_irq,
.restart = mpc8xx_restart,
.calibrate_decr = generic_calibrate_decr,
......
arch/powerpc/platforms/8xx/ep88xc.c
浏览文件 @ b370b082
......@@ -15,7 +15,6 @@
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/udbg.h>
#include <asm/commproc.h>
#include <asm/cpm1.h>
#include "mpc8xx.h"
......
arch/powerpc/platforms/Kconfig
浏览文件 @ b370b082
......@@ -24,6 +24,7 @@ config PPC_83xx
select MPC83xx
select IPIC
select WANT_DEVICE_TREE
select FSL_EMB_PERFMON
config PPC_86xx
bool "Freescale 86xx"
......
arch/powerpc/platforms/Kconfig.cputype
浏览文件 @ b370b082
......@@ -94,6 +94,7 @@ config 8xx
bool
config E500
select FSL_EMB_PERFMON
bool
config PPC_FPU
......@@ -115,6 +116,9 @@ config FSL_BOOKE
depends on E200 || E500
default y
config FSL_EMB_PERFMON
bool
config PTE_64BIT
bool
depends on 44x || E500
......
arch/powerpc/platforms/embedded6xx/storcenter.c
浏览文件 @ b370b082
......@@ -132,33 +132,18 @@ static void __init storcenter_init_IRQ(void)
paddr = (phys_addr_t)of_translate_address(dnp, prop);
mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
4, 32, " EPIC ");
16, 32, " OpenPIC ");
of_node_put(dnp);
BUG_ON(mpic == NULL);
/* PCI IRQs */
/*
* 2.6.12 patch:
* openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200);
* openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120);
* first_irq, num_irqs, __iomem first_ISR
* o_ss: i, src: 0, fdf50200
* o_ss: i, src: 1, fdf50220
* o_ss: i, src: 2, fdf50240
* o_ss: i, src: 3, fdf50260
* o_ss: i, src: 4, fdf50280
* o_ss: i, src: 5, fdf51120
* o_ss: i, src: 6, fdf51140
* 16 Serial Interrupts followed by 16 Internal Interrupts.
* I2C is the second internal, so it is at 17, 0x11020.
*/
mpic_assign_isu(mpic, 0, paddr + 0x10200);
mpic_assign_isu(mpic, 1, paddr + 0x10220);
mpic_assign_isu(mpic, 2, paddr + 0x10240);
mpic_assign_isu(mpic, 3, paddr + 0x10260);
mpic_assign_isu(mpic, 4, paddr + 0x10280);
mpic_assign_isu(mpic, 5, paddr + 0x11120);
mpic_assign_isu(mpic, 6, paddr + 0x11140);
mpic_assign_isu(mpic, 1, paddr + 0x11000);
mpic_init(mpic);
}
......@@ -178,7 +163,7 @@ static int __init storcenter_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "storcenter");
return of_flat_dt_is_compatible(root, "iomega,storcenter");
}
define_machine(storcenter){
......
arch/powerpc/sysdev/fsl_soc.c
浏览文件 @ b370b082
......@@ -1342,7 +1342,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
if (ret)
goto unreg;
ret = platform_device_register(pdev);
ret = platform_device_add(pdev);
if (ret)
goto unreg;
......
arch/powerpc/sysdev/qe_lib/qe.c
浏览文件 @ b370b082
......@@ -66,7 +66,7 @@ phys_addr_t get_qe_base(void)
{
struct device_node *qe;
unsigned int size;
const void *prop;
const u32 *prop;
if (qebase != -1)
return qebase;
......@@ -79,7 +79,8 @@ phys_addr_t get_qe_base(void)
}
prop = of_get_property(qe, "reg", &size);
qebase = of_translate_address(qe, prop);
if (prop && size >= sizeof(*prop))
qebase = of_translate_address(qe, prop);
of_node_put(qe);
return qebase;
......@@ -172,10 +173,9 @@ unsigned int get_brg_clk(void)
}
prop = of_get_property(qe, "brg-frequency", &size);
if (!prop || size != sizeof(*prop))
return brg_clk;
if (prop && size == sizeof(*prop))
brg_clk = *prop;
brg_clk = *prop;
of_node_put(qe);
return brg_clk;
......
drivers/net/Kconfig
浏览文件 @ b370b082
......@@ -1737,10 +1737,8 @@ config SC92031
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
select PHYLIB
select FIXED_PHY
select FIXED_MII_100_FDX
help
TI AR7 CPMAC Ethernet support
......
drivers/net/cpmac.c
浏览文件 @ b370b082
......@@ -845,15 +845,6 @@ static void cpmac_adjust_link(struct net_device *dev)
spin_unlock(&priv->lock);
}
static int cpmac_link_update(struct net_device *dev,
struct fixed_phy_status *status)
{
status->link = 1;
status->speed = 100;
status->duplex = 1;
return 0;
}
static int cpmac_open(struct net_device *dev)
{
int i, size, res;
......@@ -996,11 +987,11 @@ static int external_switch;
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id, i;
int mdio_bus_id = cpmac_mii.id;
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
struct plat_cpmac_data *pdata;
struct fixed_info *fixed_phy;
DECLARE_MAC_BUF(mac);
pdata = pdev->dev.platform_data;
......@@ -1014,9 +1005,23 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
}
if (phy_id == PHY_MAX_ADDR) {
if (external_switch || dumb_switch)
if (external_switch || dumb_switch) {
struct fixed_phy_status status = {};
mdio_bus_id = 0;
/*
* FIXME: this should be in the platform code!
* Since there is not platform code at all (that is,
* no mainline users of that driver), place it here
* for now.
*/
phy_id = 0;
else {
status.link = 1;
status.duplex = 1;
status.speed = 100;
fixed_phy_add(PHY_POLL, phy_id, &status);
} else {
printk(KERN_ERR "cpmac: no PHY present\n");
return -ENODEV;
}
......@@ -1060,32 +1065,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
if (phy_id == 31) {
snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
phy_id);
} else {
/* Let's try to get a free fixed phy... */
for (i = 0; i < MAX_PHY_AMNT; i++) {
fixed_phy = fixed_mdio_get_phydev(i);
if (!fixed_phy)
continue;
if (!fixed_phy->phydev->attached_dev) {
strncpy(priv->phy_name,
fixed_phy->phydev->dev.bus_id,
BUS_ID_SIZE);
fixed_mdio_set_link_update(fixed_phy->phydev,
&cpmac_link_update);
goto phy_found;
}
}
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not find fixed PHY\n",
dev->name);
rc = -ENODEV;
goto fail;
}
snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
phy_found:
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
......
include/asm-powerpc/cputable.h
浏览文件 @ b370b082
......@@ -46,7 +46,7 @@ enum powerpc_oprofile_type {
PPC_OPROFILE_RS64 = 1,
PPC_OPROFILE_POWER4 = 2,
PPC_OPROFILE_G4 = 3,
PPC_OPROFILE_BOOKE = 4,
PPC_OPROFILE_FSL_EMB = 4,
PPC_OPROFILE_CELL = 5,
PPC_OPROFILE_PA6T = 6,
};
......
include/asm-powerpc/oprofile_impl.h
浏览文件 @ b370b082
......@@ -54,7 +54,7 @@ struct op_powerpc_model {
int num_counters;
};
extern struct op_powerpc_model op_model_fsl_booke;
extern struct op_powerpc_model op_model_fsl_emb;
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
......
include/asm-powerpc/reg.h
浏览文件 @ b370b082
......@@ -18,6 +18,10 @@
#include <asm/reg_booke.h>
#endif /* CONFIG_BOOKE || CONFIG_40x */
#ifdef CONFIG_FSL_EMB_PERFMON
#include <asm/reg_fsl_emb.h>
#endif
#ifdef CONFIG_8xx
#include <asm/reg_8xx.h>
#endif /* CONFIG_8xx */
......
include/asm-powerpc/reg_booke.h
浏览文件 @ b370b082
......@@ -9,68 +9,6 @@
#ifndef __ASM_POWERPC_REG_BOOKE_H__
#define __ASM_POWERPC_REG_BOOKE_H__
#ifndef __ASSEMBLY__
/* Performance Monitor Registers */
#define mfpmr(rn) ({unsigned int rval; \
asm volatile("mfpmr %0," __stringify(rn) \
: "=r" (rval)); rval;})
#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
#endif /* __ASSEMBLY__ */
/* Freescale Book E Performance Monitor APU Registers */
#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
#define PMLCA_FC 0x80000000 /* Freeze Counter */
#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
#define PMLCA_FCU 0x20000000 /* Freeze in User */
#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
#define PMLCA_CE 0x04000000 /* Condition Enable */
#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
#define PMLCA_EVENT_SHIFT 16
#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
#define PMLCB_THRESHOLD_SHIFT 0
#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
#define PMGC0_FCECE 0x20000000 /* Freeze countes on
Enabled Condition or
Event */
#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
/* Machine State Register (MSR) Fields */
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
#define MSR_SPE (1<<25) /* Enable SPE */
......
include/asm-powerpc/reg_fsl_emb.h 0 → 100644
浏览文件 @ b370b082
/*
* Contains register definitions for the Freescale Embedded Performance
* Monitor.
*/
#ifdef __KERNEL__
#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
#define __ASM_POWERPC_REG_FSL_EMB_H__
#ifndef __ASSEMBLY__
/* Performance Monitor Registers */
#define mfpmr(rn) ({unsigned int rval; \
asm volatile("mfpmr %0," __stringify(rn) \
: "=r" (rval)); rval;})
#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
#endif /* __ASSEMBLY__ */
/* Freescale Book E Performance Monitor APU Registers */
#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
#define PMLCA_FC 0x80000000 /* Freeze Counter */
#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
#define PMLCA_FCU 0x20000000 /* Freeze in User */
#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
#define PMLCA_CE 0x04000000 /* Condition Enable */
#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
#define PMLCA_EVENT_SHIFT 16
#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
#define PMLCB_THRESHOLD_SHIFT 0
#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
#define PMGC0_FCECE 0x20000000 /* Freeze countes on
Enabled Condition or
Event */
#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
#endif /* __KERNEL__ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或