提交 b2f98200 编写于 作者: S Stefan Wahren 提交者: David S. Miller

net: qualcomm: make qca_7k_common a separate kernel module

In order to share common functions between QCA7000 SPI and UART protocol
driver the qca_7k_common needs to be a separate kernel module.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 60d67024
......@@ -16,7 +16,13 @@ config NET_VENDOR_QUALCOMM
if NET_VENDOR_QUALCOMM
config QCA7000
tristate "Qualcomm Atheros QCA7000 support"
tristate
help
This enables support for the Qualcomm Atheros QCA7000.
config QCA7000_SPI
tristate "Qualcomm Atheros QCA7000 SPI support"
select QCA7000
depends on SPI_MASTER && OF
---help---
This SPI protocol driver supports the Qualcomm Atheros QCA7000.
......
......@@ -2,7 +2,8 @@
# Makefile for the Qualcomm network device drivers.
#
obj-$(CONFIG_QCA7000) += qcaspi.o
qcaspi-objs := qca_spi.o qca_7k_common.o qca_7k.o qca_debug.o
obj-$(CONFIG_QCA7000) += qca_7k_common.o
obj-$(CONFIG_QCA7000_SPI) += qcaspi.o
qcaspi-objs := qca_7k.o qca_debug.o qca_spi.o
obj-y += emac/
......@@ -21,7 +21,9 @@
* by an atheros frame while transmitted over a serial channel;
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include "qca_7k_common.h"
......@@ -46,6 +48,7 @@ qcafrm_create_header(u8 *buf, u16 length)
return QCAFRM_HEADER_LEN;
}
EXPORT_SYMBOL_GPL(qcafrm_create_header);
u16
qcafrm_create_footer(u8 *buf)
......@@ -57,6 +60,7 @@ qcafrm_create_footer(u8 *buf)
buf[1] = 0x55;
return QCAFRM_FOOTER_LEN;
}
EXPORT_SYMBOL_GPL(qcafrm_create_footer);
/* Gather received bytes and try to extract a full ethernet frame by
* following a simple state machine.
......@@ -154,3 +158,9 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
return ret;
}
EXPORT_SYMBOL_GPL(qcafrm_fsm_decode);
MODULE_DESCRIPTION("Qualcomm Atheros QCA7000 common");
MODULE_AUTHOR("Qualcomm Atheros Communications");
MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
MODULE_LICENSE("Dual BSD/GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册