ARM: orion: Refactor the MPP code common in the orion platform

mv78xx0 and kirkwood use identical mpp code.

It should also be possible to rewrite the orion5x mpp to use this
platform code.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

arch/arm/mach-kirkwood/mpp.c

@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <asm/gpio.h>
 #include <mach/hardware.h>
+#include <plat/mpp.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -36,61 +37,8 @@ static unsigned int __init kirkwood_variant(void)
 	return 0;
 }
 
-#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
-#define MPP_NR_REGS	(1 + MPP_MAX/8)
-
 void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 {
-	u32 mpp_ctrl[MPP_NR_REGS];
-	unsigned int variant_mask;
-	int i;
-
-	variant_mask = kirkwood_variant();
-	if (!variant_mask)
-		return;
-
-	printk(KERN_DEBUG "initial MPP regs:");
-	for (i = 0; i < MPP_NR_REGS; i++) {
-		mpp_ctrl[i] = readl(MPP_CTRL(i));
-		printk(" %08x", mpp_ctrl[i]);
-	}
-	printk("\n");
-
-	for ( ; *mpp_list; mpp_list++) {
-		unsigned int num = MPP_NUM(*mpp_list);
-		unsigned int sel = MPP_SEL(*mpp_list);
-		int shift, gpio_mode;
-
-		if (num > MPP_MAX) {
-			printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP "
-					"number (%u)\n", num);
-			continue;
-		}
-		if (!(*mpp_list & variant_mask)) {
-			printk(KERN_WARNING
-			       "kirkwood_mpp_conf: requested MPP%u config "
-			       "unavailable on this hardware\n", num);
-			continue;
-		}
-
-		shift = (num & 7) << 2;
-		mpp_ctrl[num / 8] &= ~(0xf << shift);
-		mpp_ctrl[num / 8] |= sel << shift;
-
-		gpio_mode = 0;
-		if (*mpp_list & MPP_INPUT_MASK)
-			gpio_mode |= GPIO_INPUT_OK;
-		if (*mpp_list & MPP_OUTPUT_MASK)
-			gpio_mode |= GPIO_OUTPUT_OK;
-		if (sel != 0)
-			gpio_mode = 0;
-		orion_gpio_set_valid(num, gpio_mode);
-	}
-
-	printk(KERN_DEBUG "  final MPP regs:");
-	for (i = 0; i < MPP_NR_REGS; i++) {
-		writel(mpp_ctrl[i], MPP_CTRL(i));
-		printk(" %08x", mpp_ctrl[i]);
-	}
-	printk("\n");
+	orion_mpp_conf(mpp_list, kirkwood_variant(),
+		       MPP_MAX, DEV_BUS_VIRT_BASE);
 }

arch/arm/mach-kirkwood/mpp.h

@@ -22,14 +22,8 @@
 	/* available on F6281 */	((!!(_F6281)) << 17) | \
 	/* available on F6282 */	((!!(_F6282)) << 18))
 
-#define MPP_NUM(x)	((x) & 0xff)
-#define MPP_SEL(x)	(((x) >> 8) & 0xf)
-
 				/*   num sel  i  o  6180 6190 6192 6281 6282 */
 
-#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0,   0 )
-#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0,   0 )
-
 #define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0,   0 )
 #define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0,   0 )
 #define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0,   0 )

arch/arm/mach-mv78xx0/mpp.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
+#include <plat/mpp.h>
 #include <asm/gpio.h>
 #include <mach/hardware.h>
 #include "common.h"
@@ -31,61 +32,8 @@ static unsigned int __init mv78xx0_variant(void)
 	return 0;
 }
 
-#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
-#define MPP_NR_REGS	(1 + MPP_MAX/8)
-
 void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 {
-	u32 mpp_ctrl[MPP_NR_REGS];
-	unsigned int variant_mask;
-	int i;
-
-	variant_mask = mv78xx0_variant();
-	if (!variant_mask)
-		return;
-
-	printk(KERN_DEBUG "initial MPP regs:");
-	for (i = 0; i < MPP_NR_REGS; i++) {
-		mpp_ctrl[i] = readl(MPP_CTRL(i));
-		printk(" %08x", mpp_ctrl[i]);
-	}
-	printk("\n");
-
-	for ( ; *mpp_list; mpp_list++) {
-		unsigned int num = MPP_NUM(*mpp_list);
-		unsigned int sel = MPP_SEL(*mpp_list);
-		int shift, gpio_mode;
-
-		if (num > MPP_MAX) {
-			printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
-					"number (%u)\n", num);
-			continue;
-		}
-		if (!(*mpp_list & variant_mask)) {
-			printk(KERN_WARNING
-					"mv78xx0_mpp_conf: requested MPP%u config "
-					"unavailable on this hardware\n", num);
-			continue;
-		}
-
-		shift = (num & 7) << 2;
-		mpp_ctrl[num / 8] &= ~(0xf << shift);
-		mpp_ctrl[num / 8] |= sel << shift;
-
-		gpio_mode = 0;
-		if (*mpp_list & MPP_INPUT_MASK)
-			gpio_mode |= GPIO_INPUT_OK;
-		if (*mpp_list & MPP_OUTPUT_MASK)
-			gpio_mode |= GPIO_OUTPUT_OK;
-		if (sel != 0)
-			gpio_mode = 0;
-		orion_gpio_set_valid(num, gpio_mode);
-	}
-
-	printk(KERN_DEBUG "  final MPP regs:");
-	for (i = 0; i < MPP_NR_REGS; i++) {
-		writel(mpp_ctrl[i], MPP_CTRL(i));
-		printk(" %08x", mpp_ctrl[i]);
-	}
-	printk("\n");
+	orion_mpp_conf(mpp_list, mv78xx0_variant(),
+		       MPP_MAX, DEV_BUS_VIRT_BASE);
 }

arch/arm/mach-mv78xx0/mpp.h

@@ -19,14 +19,8 @@
     /* may be output signal */    ((!!(_out)) << 13) | \
     /* available on A0 */    ((!!(_78100_A0)) << 14))
 
-#define MPP_NUM(x)    ((x) & 0xff)
-#define MPP_SEL(x)    (((x) >> 8) & 0xf)
-
                 /*   num sel  i  o  78100_A0  */
 
-#define MPP_INPUT_MASK        MPP(0, 0x0, 1, 0, 0)
-#define MPP_OUTPUT_MASK        MPP(0, 0x0, 0, 1, 0)
-
 #define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
 
 #define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)

arch/arm/plat-orion/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	:= irq.o pcie.o time.o common.o
+obj-y	:= irq.o pcie.o time.o common.o mpp.o
 obj-m	:=
 obj-n	:=
 obj-	:=

arch/arm/plat-orion/include/plat/mpp.h

+/*
+ * arch/arm/plat-orion/include/plat/mpp.h
+ *
+ * Marvell Orion SoC MPP handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_MPP_H
+#define __PLAT_MPP_H
+
+#define MPP_NUM(x)	((x) & 0xff)
+#define MPP_SEL(x)	(((x) >> 8) & 0xf)
+
+/* This is the generic MPP macro, without any variant information.
+   Each machine architecture is expected to extend this with further
+   bit fields indicating which MPP configurations are valid for a
+   specific variant. */
+
+#define GENERIC_MPP(_num, _sel, _in, _out) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13))
+
+#define MPP_INPUT_MASK		GENERIC_MPP(0, 0x0, 1, 0)
+#define MPP_OUTPUT_MASK		GENERIC_MPP(0, 0x0, 0, 1)
+
+void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
+			   unsigned int mpp_max, unsigned int dev_bus);
+
+#endif

arch/arm/plat-orion/mpp.c

+/*
+ * arch/arm/plat-orion/mpp.c
+ *
+ * MPP functions for Marvell orion SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <plat/mpp.h>
+
+/* Address of the ith MPP control register */
+static __init unsigned long mpp_ctrl_addr(unsigned int i,
+					  unsigned long dev_bus)
+{
+	return dev_bus + (i) * 4;
+}
+
+
+void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
+			   unsigned int mpp_max, unsigned int dev_bus)
+{
+	unsigned int mpp_nr_regs = (1 + mpp_max/8);
+	u32 mpp_ctrl[mpp_nr_regs];
+	int i;
+
+	if (!variant_mask)
+		return;
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < mpp_nr_regs; i++) {
+		mpp_ctrl[i] = readl(mpp_ctrl_addr(i, dev_bus));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	for ( ; *mpp_list; mpp_list++) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > mpp_max) {
+			printk(KERN_ERR "orion_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+			       "orion_mpp_conf: requested MPP%u config "
+			       "unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < mpp_nr_regs; i++) {
+		writel(mpp_ctrl[i], mpp_ctrl_addr(i, dev_bus));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}