Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/mediatek/mtk_eth_soc.c
	drivers/net/ethernet/qlogic/qed/qed_dcbx.c
	drivers/net/phy/Kconfig

All conflicts were cases of overlapping commits.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

.mailmap

@@ -88,6 +88,7 @@ Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
@@ -158,6 +159,8 @@ Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/stable/sysfs-devices

 # Note: This documents additional properties of any device beyond what
 # is documented in Documentation/sysfs-rules.txt
 
-What:		/sys/devices/*/of_path
+What:		/sys/devices/*/of_node
 Date:		February 2015
 Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:

Documentation/PCI/pci.txt

@@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
 
 The ID table is an array of struct pci_device_id entries ending with an
 all-zero entry.  Definitions with static const are generally preferred.
-Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
 
 Each entry consists of:
 

Documentation/arm/CCN.txt

@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
 directory provides configuration templates for all documented
 events, that can be used with perf tool. For example "xp_valid_flit"
 is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
 
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional

Documentation/cpu-freq/cpufreq-stats.txt

@@ -103,7 +103,7 @@ Config Main Menu
 	Power management options (ACPI, APM)  --->
 		CPU Frequency scaling  --->
 			[*] CPU Frequency scaling
-			<*>   CPU frequency translation statistics 
+			[*]   CPU frequency translation statistics
 			[*]     CPU frequency translation statistics details
 
 

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -16,6 +16,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -23,6 +28,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

Documentation/devicetree/bindings/serial/8250.txt

@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 	};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-	uart4: serial@49042000 {
-		compatible = "ti,omap3-uart";
-		reg = <0x49042000 0x400>;
-		interrupts = <80>;
-		ti,hwmods = "uart4";
-		clock-frequency = <48000000>;
-		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	};

Documentation/filesystems/overlayfs.txt

@@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
 moves it over to the old name.  The new file may be on a different
 filesystem, so both st_dev and st_ino of the file may change.
 
-Any open files referring to this inode will access the old data and
-metadata.  Similarly any file locks obtained before copy_up will not
-apply to the copied up file.
+Any open files referring to this inode will access the old data.
 
-On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
-fsetxattr(2) will fail with EROFS.
+Any file locks (and leases) obtained before copy_up will not apply
+to the copied up file.
 
 If a file with multiple hard links is copied up, then this will
 "break" the link.  Changes will not be propagated to other names

Documentation/i2c/slave-interface

@@ -145,6 +145,11 @@ If you want to add slave support to the bus driver:
 
 * Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
 
+Note that most hardware supports being master _and_ slave on the same bus. So,
+if you extend a bus driver, please make sure that the driver supports that as
+well. In almost all cases, slave support does not need to disable the master
+functionality.
+
 Check the i2c-rcar driver as an example.
 
 

Documentation/rapidio/mport_cdev.txt

@@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
 
 III. Module parameters
 
+- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+        This parameter set a maximum completion wait time for SYNC mode DMA
+        transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
 - 'dbg_level' - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.

MAINTAINERS

@@ -807,6 +807,7 @@ M:	Laura Abbott <labbott@redhat.com>
 M:	Sumit Semwal <sumit.semwal@linaro.org>
 L:	devel@driverdev.osuosl.org
 S:	Supported
+F:	Documentation/devicetree/bindings/staging/ion/
 F:	drivers/staging/android/ion
 F:	drivers/staging/android/uapi/ion.h
 F:	drivers/staging/android/uapi/ion_test.h
@@ -1632,7 +1633,7 @@ N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -1652,7 +1653,6 @@ F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
-F:	drivers/spi/spi-s3c*
 F:	Documentation/arm/Samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/sram/samsung-sram.txt
@@ -1840,6 +1840,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
 S:	Maintained
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
@@ -2493,7 +2494,7 @@ F:	include/net/bluetooth/
 BONDING DRIVER
 M:	Jay Vosburgh <j.vosburgh@gmail.com>
 M:	Veaceslav Falico <vfalico@gmail.com>
-M:	Andy Gospodarek <gospo@cumulusnetworks.com>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -3256,7 +3257,7 @@ F:	kernel/cpuset.c
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
 M:	Michal Hocko <mhocko@kernel.org>
-M:	Vladimir Davydov <vdavydov@virtuozzo.com>
+M:	Vladimir Davydov <vdavydov.dev@gmail.com>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -3277,7 +3278,7 @@ S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-M:	Florian Fainelli <florian@openwrt.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
@@ -7473,7 +7474,8 @@ F:	Documentation/devicetree/bindings/sound/max9860.txt
 F:	sound/soc/codecs/max9860.*
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/power/max14577_charger.c
@@ -7489,7 +7491,8 @@ F:	include/dt-bindings/*/*max77802.h
 
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/*/max14577*.c
@@ -9255,7 +9258,7 @@ F:	drivers/pinctrl/sh-pfc/
 
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -10195,7 +10198,7 @@ S:	Maintained
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -10210,7 +10213,8 @@ F:	drivers/video/fbdev/s3c-fb.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Sangbeom Kim <sbkim73@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
@@ -10269,6 +10273,17 @@ S:	Supported
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 F:	drivers/clk/samsung/
 
+SAMSUNG SPI DRIVERS
+M:	Kukjin Kim <kgene@kernel.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Andi Shyti <andi.shyti@samsung.com>
+L:	linux-spi@vger.kernel.org
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/spi-samsung.txt
+F:	drivers/spi/spi-s3c*
+F:	include/linux/platform_data/spi-s3c64xx.h
+
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
 M:	Girish K S <ks.giri@samsung.com>
@@ -11248,12 +11263,8 @@ S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
 STAGING - WILC1000 WIFI DRIVER
-M:	Johnny Kim <johnny.kim@atmel.com>
-M:	Austin Shin <austin.shin@atmel.com>
-M:	Chris Park <chris.park@atmel.com>
-M:	Tony Cho <tony.cho@atmel.com>
-M:	Glen Lee <glen.lee@atmel.com>
-M:	Leo Kim <leo.kim@atmel.com>
+M:	Aditya Shankar <aditya.shankar@microchip.com>
+M:	Ganesh Krishna <ganesh.krishna@microchip.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/staging/wilc1000/

Makefile

 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -336,17 +336,6 @@ config HAVE_ARCH_SECCOMP_FILTER
 	    results in the system call being skipped immediately.
 	  - seccomp syscall wired up
 
-	  For best performance, an arch should use seccomp_phase1 and
-	  seccomp_phase2 directly.  It should call seccomp_phase1 for all
-	  syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not
-	  need to be called from a ptrace-safe context.  It must then
-	  call seccomp_phase2 if seccomp_phase1 returns anything other
-	  than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP.
-
-	  As an additional optimization, an arch may provide seccomp_data
-	  directly to seccomp_phase1; this avoids multiple calls
-	  to the syscall_xyz helpers for every syscall.
-
 config SECCOMP_FILTER
 	def_bool y
 	depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -390,12 +390,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -405,12 +405,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {

arch/arm/boot/dts/exynos5410-odroidxu.dts

@@ -447,14 +447,11 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -243,7 +243,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -131,7 +131,7 @@
 		ti,y-min = /bits/ 16 <0>;
 		ti,y-max = /bits/ 16 <0>;
 		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plat-ohms = /bits/ 16 <400>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {

arch/arm/boot/dts/kirkwood-openrd.dtsi

@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -35,10 +35,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -46,6 +46,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";

arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi

@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi

@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/rk3066a.dtsi

@@ -197,6 +197,8 @@
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3288.dtsi

@@ -279,6 +279,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3xxx.dtsi

@@ -399,6 +399,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra114-roth.dts

@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra114-tn7.dts

@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@0,70006000 {
+	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@0,70006040 {
+	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

arch/arm/kernel/hyp-stub.S

@@ -142,6 +142,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
 
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
+	orr	r7, #(1 << 5)		@ CP15 barriers enabled
+	bic	r7, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r7, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
+
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1

arch/arm/mach-imx/mach-imx6ul.c

@@ -64,6 +64,7 @@ static void __init imx6ul_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
+	of_platform_default_populate(NULL, NULL, parent);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();

arch/arm/mach-imx/pm-imx6.c

@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;

arch/arm/mach-omap2/cm33xx.c

@@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);

arch/arm/mach-omap2/cminst44xx.c

@@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);

arch/arm/mach-omap2/omap_hwmod.c

@@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
 					oh->clkdm->cm_inst,
 					oh->prcm.omap4.clkctrl_offs, 0);
@@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 	if (!_find_mpu_rt_port(oh))
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	/* XXX check module SIDLEMODE, hardreset status */
 
 	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,

arch/arm/mach-omap2/omap_hwmod.h

@@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
  * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
  *     module-level context loss register associated with them; this
  *     flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ *	offset of zero; this flag bit should be set in those cases to
+ *	distinguish from hwmods that have no clkctrl offset.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -29,6 +29,7 @@
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
 #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
 
 /*
  * 'l3' class
@@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {

arch/arm/mach-sa1100/clock.c

@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/generic.c

@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*

arch/arm/mach-sa1100/generic.h

@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);

arch/arm/mm/proc-v7.S

@@ -16,6 +16,7 @@
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
+#include <asm/memory.h>
 
 #include "proc-macros.S"
 

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -270,6 +270,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm64/include/asm/percpu.h

@@ -199,19 +199,19 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 #define _percpu_read(pcp)						\
 ({									\
 	typeof(pcp) __retval;						\
-	preempt_disable();						\
+	preempt_disable_notrace();					\
 	__retval = (typeof(pcp))__percpu_read(raw_cpu_ptr(&(pcp)), 	\
 					      sizeof(pcp));		\
-	preempt_enable();						\
+	preempt_enable_notrace();					\
 	__retval;							\
 })
 
 #define _percpu_write(pcp, val)						\
 do {									\
-	preempt_disable();						\
+	preempt_disable_notrace();					\
 	__percpu_write(raw_cpu_ptr(&(pcp)), (unsigned long)(val), 	\
 				sizeof(pcp));				\
-	preempt_enable();						\
+	preempt_enable_notrace();					\
 } while(0)								\
 
 #define _pcp_protect(operation, pcp, val)			\

arch/arm64/include/asm/spinlock.h

@@ -363,4 +363,14 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 #define arch_read_relax(lock)	cpu_relax()
 #define arch_write_relax(lock)	cpu_relax()
 
+/*
+ * Accesses appearing in program order before a spin_lock() operation
+ * can be reordered with accesses inside the critical section, by virtue
+ * of arch_spin_lock being constructed using acquire semantics.
+ *
+ * In cases where this is problematic (e.g. try_to_wake_up), an
+ * smp_mb__before_spinlock() can restore the required ordering.
+ */
+#define smp_mb__before_spinlock()	smp_mb()
+
 #endif /* __ASM_SPINLOCK_H */

arch/arm64/mm/proc.S

@@ -100,7 +100,16 @@ ENTRY(cpu_do_resume)
 
 	msr	tcr_el1, x8
 	msr	vbar_el1, x9
+
+	/*
+	 * __cpu_setup() cleared MDSCR_EL1.MDE and friends, before unmasking
+	 * debug exceptions. By restoring MDSCR_EL1 here, we may take a debug
+	 * exception. Mask them until local_dbg_restore() in cpu_suspend()
+	 * resets them.
+	 */
+	disable_dbg
 	msr	mdscr_el1, x10
+
 	msr	sctlr_el1, x12
 	/*
 	 * Restore oslsr_el1 by writing oslar_el1

arch/ia64/include/asm/uaccess.h

@@ -241,8 +241,7 @@ extern unsigned long __must_check __copy_user (void __user *to, const void __use
 static inline unsigned long
 __copy_to_user (void __user *to, const void *from, unsigned long count)
 {
-	if (!__builtin_constant_p(count))
-		check_object_size(from, count, true);
+	check_object_size(from, count, true);
 
 	return __copy_user(to, (__force void __user *) from, count);
 }
@@ -250,8 +249,7 @@ __copy_to_user (void __user *to, const void *from, unsigned long count)
 static inline unsigned long
 __copy_from_user (void *to, const void __user *from, unsigned long count)
 {
-	if (!__builtin_constant_p(count))
-		check_object_size(to, count, false);
+	check_object_size(to, count, false);
 
 	return __copy_user((__force void __user *) to, from, count);
 }
@@ -265,8 +263,7 @@ __copy_from_user (void *to, const void __user *from, unsigned long count)
 	long __cu_len = (n);								\
 											\
 	if (__access_ok(__cu_to, __cu_len, get_fs())) {					\
-		if (!__builtin_constant_p(n))						\
-			check_object_size(__cu_from, __cu_len, true);			\
+		check_object_size(__cu_from, __cu_len, true);			\
 		__cu_len = __copy_user(__cu_to, (__force void __user *)  __cu_from, __cu_len);	\
 	}										\
 	__cu_len;									\
@@ -280,8 +277,7 @@ __copy_from_user (void *to, const void __user *from, unsigned long count)
 											\
 	__chk_user_ptr(__cu_from);							\
 	if (__access_ok(__cu_from, __cu_len, get_fs())) {				\
-		if (!__builtin_constant_p(n))						\
-			check_object_size(__cu_to, __cu_len, false);			\
+		check_object_size(__cu_to, __cu_len, false);			\
 		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
 	}										\
 	__cu_len;									\

arch/parisc/Kconfig

 config PARISC
 	def_bool y
-	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_IDE
 	select HAVE_OPROFILE

arch/parisc/configs/c8000_defconfig

@@ -245,7 +245,6 @@ CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_PROVE_RCU_DELAY=y
 CONFIG_DEBUG_BLOCK_EXT_DEVT=y
 CONFIG_LATENCYTOP=y
-CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_KEYS=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_FONTS=y

arch/parisc/configs/generic-64bit_defconfig

@@ -291,7 +291,6 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m

arch/parisc/include/asm/uaccess.h

@@ -208,13 +208,13 @@ unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned lo
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-extern void copy_from_user_overflow(void)
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-        __compiletime_error("copy_from_user() buffer size is not provably correct")
-#else
-        __compiletime_warning("copy_from_user() buffer size is not provably correct")
-#endif
-;
+extern void __compiletime_error("usercopy buffer size is too small")
+__bad_copy_user(void);
+
+static inline void copy_user_overflow(int size, unsigned long count)
+{
+	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
+}
 
 static inline unsigned long __must_check copy_from_user(void *to,
                                           const void __user *from,
@@ -223,10 +223,12 @@ static inline unsigned long __must_check copy_from_user(void *to,
         int sz = __compiletime_object_size(to);
         int ret = -EFAULT;
 
-        if (likely(sz == -1 || !__builtin_constant_p(n) || sz >= n))
+        if (likely(sz == -1 || sz >= n))
                 ret = __copy_from_user(to, from, n);
-        else
-                copy_from_user_overflow();
+        else if (!__builtin_constant_p(n))
+		copy_user_overflow(sz, n);
+	else
+                __bad_copy_user();
 
         return ret;
 }

arch/powerpc/include/asm/uaccess.h

@@ -311,14 +311,12 @@ static inline unsigned long copy_from_user(void *to,
 	unsigned long over;
 
 	if (access_ok(VERIFY_READ, from, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(to, n, false);
+		check_object_size(to, n, false);
 		return __copy_tofrom_user((__force void __user *)to, from, n);
 	}
 	if ((unsigned long)from < TASK_SIZE) {
 		over = (unsigned long)from + n - TASK_SIZE;
-		if (!__builtin_constant_p(n - over))
-			check_object_size(to, n - over, false);
+		check_object_size(to, n - over, false);
 		return __copy_tofrom_user((__force void __user *)to, from,
 				n - over) + over;
 	}
@@ -331,14 +329,12 @@ static inline unsigned long copy_to_user(void __user *to,
 	unsigned long over;
 
 	if (access_ok(VERIFY_WRITE, to, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(from, n, true);
+		check_object_size(from, n, true);
 		return __copy_tofrom_user(to, (__force void __user *)from, n);
 	}
 	if ((unsigned long)to < TASK_SIZE) {
 		over = (unsigned long)to + n - TASK_SIZE;
-		if (!__builtin_constant_p(n))
-			check_object_size(from, n - over, true);
+		check_object_size(from, n - over, true);
 		return __copy_tofrom_user(to, (__force void __user *)from,
 				n - over) + over;
 	}
@@ -383,8 +379,7 @@ static inline unsigned long __copy_from_user_inatomic(void *to,
 			return 0;
 	}
 
-	if (!__builtin_constant_p(n))
-		check_object_size(to, n, false);
+	check_object_size(to, n, false);
 
 	return __copy_tofrom_user((__force void __user *)to, from, n);
 }
@@ -412,8 +407,8 @@ static inline unsigned long __copy_to_user_inatomic(void __user *to,
 		if (ret == 0)
 			return 0;
 	}
-	if (!__builtin_constant_p(n))
-		check_object_size(from, n, true);
+
+	check_object_size(from, n, true);
 
 	return __copy_tofrom_user(to, (__force const void __user *)from, n);
 }

arch/powerpc/lib/checksum_32.S

@@ -127,18 +127,19 @@ _GLOBAL(csum_partial_copy_generic)
 	stw	r7,12(r1)
 	stw	r8,8(r1)
 
-	rlwinm	r0,r4,3,0x8
-	rlwnm	r6,r6,r0,0,31	/* odd destination address: rotate one byte */
-	cmplwi	cr7,r0,0	/* is destination address even ? */
 	addic	r12,r6,0
 	addi	r6,r4,-4
 	neg	r0,r4
 	addi	r4,r3,-4
 	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
+	crset	4*cr7+eq
 	beq	58f
 
 	cmplw	0,r5,r0			/* is this more than total to do? */
 	blt	63f			/* if not much to do */
+	rlwinm	r7,r6,3,0x8
+	rlwnm	r12,r12,r7,0,31	/* odd destination address: rotate one byte */
+	cmplwi	cr7,r7,0	/* is destination address even ? */
 	andi.	r8,r0,3			/* get it word-aligned first */
 	mtctr	r8
 	beq+	61f

arch/powerpc/mm/slb_low.S

@@ -113,7 +113,12 @@ BEGIN_FTR_SECTION
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
-0:
+0:	/*
+	 * For userspace addresses, make sure this is region 0.
+	 */
+	cmpdi	r9, 0
+	bne	8f
+
 	/* when using slices, we extract the psize off the slice bitmaps
 	 * and then we need to get the sllp encoding off the mmu_psize_defs
 	 * array.

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -162,11 +162,12 @@ static struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb)
 static void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb;
+	unsigned int pe_num = pe->pe_number;
 
 	WARN_ON(pe->pdev);
 
 	memset(pe, 0, sizeof(struct pnv_ioda_pe));
-	clear_bit(pe->pe_number, phb->ioda.pe_alloc);
+	clear_bit(pe_num, phb->ioda.pe_alloc);
 }
 
 /* The default M64 BAR is shared by all PEs */
@@ -3402,12 +3403,6 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 	struct pnv_phb *phb = pe->phb;
 	struct pnv_ioda_pe *slave, *tmp;
 
-	/* Release slave PEs in compound PE */
-	if (pe->flags & PNV_IODA_PE_MASTER) {
-		list_for_each_entry_safe(slave, tmp, &pe->slaves, list)
-			pnv_ioda_release_pe(slave);
-	}
-
 	list_del(&pe->list);
 	switch (phb->type) {
 	case PNV_PHB_IODA1:
@@ -3422,6 +3417,15 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 
 	pnv_ioda_release_pe_seg(pe);
 	pnv_ioda_deconfigure_pe(pe->phb, pe);
+
+	/* Release slave PEs in the compound PE */
+	if (pe->flags & PNV_IODA_PE_MASTER) {
+		list_for_each_entry_safe(slave, tmp, &pe->slaves, list) {
+			list_del(&slave->list);
+			pnv_ioda_free_pe(slave);
+		}
+	}
+
 	pnv_ioda_free_pe(pe);
 }
 

arch/powerpc/platforms/pseries/setup.c

@@ -41,7 +41,6 @@
 #include <linux/root_dev.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
-#include <linux/kexec.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -66,6 +65,7 @@
 #include <asm/eeh.h>
 #include <asm/reg.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/kexec.h>
 
 #include "pseries.h"
 

arch/powerpc/sysdev/xics/icp-opal.c

@@ -23,10 +23,10 @@
 
 static void icp_opal_teardown_cpu(void)
 {
-	int cpu = smp_processor_id();
+	int hw_cpu = hard_smp_processor_id();
 
 	/* Clear any pending IPI */
-	opal_int_set_mfrr(cpu, 0xff);
+	opal_int_set_mfrr(hw_cpu, 0xff);
 }
 
 static void icp_opal_flush_ipi(void)
@@ -101,14 +101,16 @@ static void icp_opal_eoi(struct irq_data *d)
 
 static void icp_opal_cause_ipi(int cpu, unsigned long data)
 {
-	opal_int_set_mfrr(cpu, IPI_PRIORITY);
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+
+	opal_int_set_mfrr(hw_cpu, IPI_PRIORITY);
 }
 
 static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id)
 {
-	int cpu = smp_processor_id();
+	int hw_cpu = hard_smp_processor_id();
 
-	opal_int_set_mfrr(cpu, 0xff);
+	opal_int_set_mfrr(hw_cpu, 0xff);
 
 	return smp_ipi_demux();
 }

arch/s390/Kconfig

@@ -68,7 +68,6 @@ config DEBUG_RODATA
 config S390
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL

arch/s390/configs/default_defconfig

@@ -602,7 +602,6 @@ CONFIG_FAIL_FUTEX=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
-CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_IRQSOFF_TRACER=y
 CONFIG_PREEMPT_TRACER=y
 CONFIG_SCHED_TRACER=y

arch/s390/configs/gcov_defconfig

@@ -552,7 +552,6 @@ CONFIG_NOTIFIER_ERROR_INJECTION=m
 CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
 CONFIG_PM_NOTIFIER_ERROR_INJECT=m
 CONFIG_LATENCYTOP=y
-CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_KPROBE_EVENT is not set
 CONFIG_TRACE_ENUM_MAP_FILE=y

arch/s390/configs/performance_defconfig

@@ -549,7 +549,6 @@ CONFIG_TIMER_STATS=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_LATENCYTOP=y
-CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_SCHED_TRACER=y
 CONFIG_FTRACE_SYSCALLS=y
 CONFIG_STACK_TRACER=y

arch/s390/defconfig

@@ -172,7 +172,6 @@ CONFIG_DEBUG_NOTIFIERS=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_RCU_TRACE=y
 CONFIG_LATENCYTOP=y
-CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_SCHED_TRACER=y
 CONFIG_FTRACE_SYSCALLS=y
 CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y

arch/s390/include/asm/uaccess.h

@@ -311,6 +311,14 @@ int __get_user_bad(void) __attribute__((noreturn));
 #define __put_user_unaligned __put_user
 #define __get_user_unaligned __get_user
 
+extern void __compiletime_error("usercopy buffer size is too small")
+__bad_copy_user(void);
+
+static inline void copy_user_overflow(int size, unsigned long count)
+{
+	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
+}
+
 /**
  * copy_to_user: - Copy a block of data into user space.
  * @to:   Destination address, in user space.
@@ -332,12 +340,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 	return __copy_to_user(to, from, n);
 }
 
-void copy_from_user_overflow(void)
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-__compiletime_warning("copy_from_user() buffer size is not provably correct")
-#endif
-;
-
 /**
  * copy_from_user: - Copy a block of data from user space.
  * @to:   Destination address, in kernel space.
@@ -362,7 +364,10 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
 
 	might_fault();
 	if (unlikely(sz != -1 && sz < n)) {
-		copy_from_user_overflow();
+		if (!__builtin_constant_p(n))
+			copy_user_overflow(sz, n);
+		else
+			__bad_copy_user();
 		return n;
 	}
 	return __copy_from_user(to, from, n);

arch/sparc/include/asm/uaccess_32.h

@@ -249,8 +249,7 @@ unsigned long __copy_user(void __user *to, const void __user *from, unsigned lon
 static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	if (n && __access_ok((unsigned long) to, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(from, n, true);
+		check_object_size(from, n, true);
 		return __copy_user(to, (__force void __user *) from, n);
 	} else
 		return n;
@@ -258,16 +257,14 @@ static inline unsigned long copy_to_user(void __user *to, const void *from, unsi
 
 static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	if (!__builtin_constant_p(n))
-		check_object_size(from, n, true);
+	check_object_size(from, n, true);
 	return __copy_user(to, (__force void __user *) from, n);
 }
 
 static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	if (n && __access_ok((unsigned long) from, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(to, n, false);
+		check_object_size(to, n, false);
 		return __copy_user((__force void __user *) to, from, n);
 	} else
 		return n;

arch/sparc/include/asm/uaccess_64.h

@@ -212,8 +212,7 @@ copy_from_user(void *to, const void __user *from, unsigned long size)
 {
 	unsigned long ret;
 
-	if (!__builtin_constant_p(size))
-		check_object_size(to, size, false);
+	check_object_size(to, size, false);
 
 	ret = ___copy_from_user(to, from, size);
 	if (unlikely(ret))
@@ -233,8 +232,8 @@ copy_to_user(void __user *to, const void *from, unsigned long size)
 {
 	unsigned long ret;
 
-	if (!__builtin_constant_p(size))
-		check_object_size(from, size, true);
+	check_object_size(from, size, true);
+
 	ret = ___copy_to_user(to, from, size);
 	if (unlikely(ret))
 		ret = copy_to_user_fixup(to, from, size);

arch/tile/Kconfig

@@ -4,7 +4,6 @@
 config TILE
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_WANT_FRAME_POINTERS

arch/tile/include/asm/uaccess.h

@@ -416,14 +416,13 @@ _copy_from_user(void *to, const void __user *from, unsigned long n)
 	return n;
 }
 
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-/*
- * There are still unprovable places in the generic code as of 2.6.34, so this
- * option is not really compatible with -Werror, which is more useful in
- * general.
- */
-extern void copy_from_user_overflow(void)
-	__compiletime_warning("copy_from_user() size is not provably correct");
+extern void __compiletime_error("usercopy buffer size is too small")
+__bad_copy_user(void);
+
+static inline void copy_user_overflow(int size, unsigned long count)
+{
+	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
+}
 
 static inline unsigned long __must_check copy_from_user(void *to,
 					  const void __user *from,
@@ -433,14 +432,13 @@ static inline unsigned long __must_check copy_from_user(void *to,
 
 	if (likely(sz == -1 || sz >= n))
 		n = _copy_from_user(to, from, n);
+	else if (!__builtin_constant_p(n))
+		copy_user_overflow(sz, n);
 	else
-		copy_from_user_overflow();
+		__bad_copy_user();
 
 	return n;
 }
-#else
-#define copy_from_user _copy_from_user
-#endif
 
 #ifdef __tilegx__
 /**

arch/um/kernel/skas/syscall.c

@@ -21,21 +21,17 @@ void handle_syscall(struct uml_pt_regs *r)
 	PT_REGS_SET_SYSCALL_RETURN(regs, -ENOSYS);
 
 	if (syscall_trace_enter(regs))
-		return;
+		goto out;
 
 	/* Do the seccomp check after ptrace; failures should be fast. */
 	if (secure_computing(NULL) == -1)
-		return;
+		goto out;
 
-	/* Update the syscall number after orig_ax has potentially been updated
-	 * with ptrace.
-	 */
-	UPT_SYSCALL_NR(r) = PT_SYSCALL_NR(r->gp);
 	syscall = UPT_SYSCALL_NR(r);
-
 	if (syscall >= 0 && syscall <= __NR_syscall_max)
 		PT_REGS_SET_SYSCALL_RETURN(regs,
 				EXECUTE_SYSCALL(syscall, regs));
 
+out:
 	syscall_trace_leave(regs);
 }

arch/x86/Kconfig

@@ -24,7 +24,6 @@ config X86
 	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FAST_MULTIPLIER

arch/x86/configs/tiny.config

 CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set

arch/x86/include/asm/uaccess.h

@@ -697,44 +697,15 @@ unsigned long __must_check _copy_from_user(void *to, const void __user *from,
 unsigned long __must_check _copy_to_user(void __user *to, const void *from,
 					 unsigned n);
 
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-# define copy_user_diag __compiletime_error
-#else
-# define copy_user_diag __compiletime_warning
-#endif
-
-extern void copy_user_diag("copy_from_user() buffer size is too small")
-copy_from_user_overflow(void);
-extern void copy_user_diag("copy_to_user() buffer size is too small")
-copy_to_user_overflow(void) __asm__("copy_from_user_overflow");
-
-#undef copy_user_diag
-
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-
-extern void
-__compiletime_warning("copy_from_user() buffer size is not provably correct")
-__copy_from_user_overflow(void) __asm__("copy_from_user_overflow");
-#define __copy_from_user_overflow(size, count) __copy_from_user_overflow()
-
-extern void
-__compiletime_warning("copy_to_user() buffer size is not provably correct")
-__copy_to_user_overflow(void) __asm__("copy_from_user_overflow");
-#define __copy_to_user_overflow(size, count) __copy_to_user_overflow()
-
-#else
+extern void __compiletime_error("usercopy buffer size is too small")
+__bad_copy_user(void);
 
-static inline void
-__copy_from_user_overflow(int size, unsigned long count)
+static inline void copy_user_overflow(int size, unsigned long count)
 {
 	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
 }
 
-#define __copy_to_user_overflow __copy_from_user_overflow
-
-#endif
-
-static inline unsigned long __must_check
+static __always_inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	int sz = __compiletime_object_size(to);
@@ -743,36 +714,18 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
 
 	kasan_check_write(to, n);
 
-	/*
-	 * While we would like to have the compiler do the checking for us
-	 * even in the non-constant size case, any false positives there are
-	 * a problem (especially when DEBUG_STRICT_USER_COPY_CHECKS, but even
-	 * without - the [hopefully] dangerous looking nature of the warning
-	 * would make people go look at the respecitive call sites over and
-	 * over again just to find that there's no problem).
-	 *
-	 * And there are cases where it's just not realistic for the compiler
-	 * to prove the count to be in range. For example when multiple call
-	 * sites of a helper function - perhaps in different source files -
-	 * all doing proper range checking, yet the helper function not doing
-	 * so again.
-	 *
-	 * Therefore limit the compile time checking to the constant size
-	 * case, and do only runtime checking for non-constant sizes.
-	 */
-
 	if (likely(sz < 0 || sz >= n)) {
 		check_object_size(to, n, false);
 		n = _copy_from_user(to, from, n);
-	} else if (__builtin_constant_p(n))
-		copy_from_user_overflow();
+	} else if (!__builtin_constant_p(n))
+		copy_user_overflow(sz, n);
 	else
-		__copy_from_user_overflow(sz, n);
+		__bad_copy_user();
 
 	return n;
 }
 
-static inline unsigned long __must_check
+static __always_inline unsigned long __must_check
 copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	int sz = __compiletime_object_size(from);
@@ -781,21 +734,17 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 
 	might_fault();
 
-	/* See the comment in copy_from_user() above. */
 	if (likely(sz < 0 || sz >= n)) {
 		check_object_size(from, n, true);
 		n = _copy_to_user(to, from, n);
-	} else if (__builtin_constant_p(n))
-		copy_to_user_overflow();
+	} else if (!__builtin_constant_p(n))
+		copy_user_overflow(sz, n);
 	else
-		__copy_to_user_overflow(sz, n);
+		__bad_copy_user();
 
 	return n;
 }
 
-#undef __copy_from_user_overflow
-#undef __copy_to_user_overflow
-
 /*
  * We rely on the nested NMI work to allow atomic faults from the NMI path; the
  * nested NMI paths are careful to preserve CR2.

arch/x86/kernel/cpu/amd.c

@@ -669,6 +669,17 @@ static void init_amd_gh(struct cpuinfo_x86 *c)
 		set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
 }
 
+#define MSR_AMD64_DE_CFG	0xC0011029
+
+static void init_amd_ln(struct cpuinfo_x86 *c)
+{
+	/*
+	 * Apply erratum 665 fix unconditionally so machines without a BIOS
+	 * fix work.
+	 */
+	msr_set_bit(MSR_AMD64_DE_CFG, 31);
+}
+
 static void init_amd_bd(struct cpuinfo_x86 *c)
 {
 	u64 value;
@@ -726,6 +737,7 @@ static void init_amd(struct cpuinfo_x86 *c)
 	case 6:	   init_amd_k7(c); break;
 	case 0xf:  init_amd_k8(c); break;
 	case 0x10: init_amd_gh(c); break;
+	case 0x12: init_amd_ln(c); break;
 	case 0x15: init_amd_bd(c); break;
 	}
 

arch/x86/kernel/paravirt.c

@@ -56,12 +56,12 @@ asm (".pushsection .entry.text, \"ax\"\n"
      ".popsection");
 
 /* identity function, which can be inlined */
-u32 _paravirt_ident_32(u32 x)
+u32 notrace _paravirt_ident_32(u32 x)
 {
 	return x;
 }
 
-u64 _paravirt_ident_64(u64 x)
+u64 notrace _paravirt_ident_64(u64 x)
 {
 	return x;
 }

arch/x86/mm/pat.c

@@ -927,9 +927,10 @@ int track_pfn_copy(struct vm_area_struct *vma)
 }
 
 /*
- * prot is passed in as a parameter for the new mapping. If the vma has a
- * linear pfn mapping for the entire range reserve the entire vma range with
- * single reserve_pfn_range call.
+ * prot is passed in as a parameter for the new mapping. If the vma has
+ * a linear pfn mapping for the entire range, or no vma is provided,
+ * reserve the entire pfn + size range with single reserve_pfn_range
+ * call.
  */
 int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
 		    unsigned long pfn, unsigned long addr, unsigned long size)
@@ -938,11 +939,12 @@ int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
 	enum page_cache_mode pcm;
 
 	/* reserve the whole chunk starting from paddr */
-	if (addr == vma->vm_start && size == (vma->vm_end - vma->vm_start)) {
+	if (!vma || (addr == vma->vm_start
+				&& size == (vma->vm_end - vma->vm_start))) {
 		int ret;
 
 		ret = reserve_pfn_range(paddr, size, prot, 0);
-		if (!ret)
+		if (ret == 0 && vma)
 			vma->vm_flags |= VM_PAT;
 		return ret;
 	}
@@ -997,7 +999,7 @@ void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
 	resource_size_t paddr;
 	unsigned long prot;
 
-	if (!(vma->vm_flags & VM_PAT))
+	if (vma && !(vma->vm_flags & VM_PAT))
 		return;
 
 	/* free the chunk starting from pfn or the whole chunk */
@@ -1011,7 +1013,8 @@ void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
 		size = vma->vm_end - vma->vm_start;
 	}
 	free_pfn_range(paddr, size);
-	vma->vm_flags &= ~VM_PAT;
+	if (vma)
+		vma->vm_flags &= ~VM_PAT;
 }
 
 /*

arch/x86/um/ptrace_32.c

@@ -84,7 +84,10 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	case EAX:
 	case EIP:
 	case UESP:
+		break;
 	case ORIG_EAX:
+		/* Update the syscall number. */
+		UPT_SYSCALL_NR(&child->thread.regs.regs) = value;
 		break;
 	case FS:
 		if (value && (value & 3) != 3)

arch/x86/um/ptrace_64.c

@@ -78,7 +78,11 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	case RSI:
 	case RDI:
 	case RBP:
+		break;
+
 	case ORIG_RAX:
+		/* Update the syscall number. */
+		UPT_SYSCALL_NR(&child->thread.regs.regs) = value;
 		break;
 
 	case FS:

crypto/cryptd.c

@@ -733,13 +733,14 @@ static void cryptd_aead_crypt(struct aead_request *req,
 	rctx = aead_request_ctx(req);
 	compl = rctx->complete;
 
+	tfm = crypto_aead_reqtfm(req);
+
 	if (unlikely(err == -EINPROGRESS))
 		goto out;
 	aead_request_set_tfm(req, child);
 	err = crypt( req );
 
 out:
-	tfm = crypto_aead_reqtfm(req);
 	ctx = crypto_aead_ctx(tfm);
 	refcnt = atomic_read(&ctx->refcnt);
 

drivers/acpi/nfit/mce.c

@@ -42,7 +42,7 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val,
 		list_for_each_entry(nfit_spa, &acpi_desc->spas, list) {
 			struct acpi_nfit_system_address *spa = nfit_spa->spa;
 
-			if (nfit_spa_type(spa) == NFIT_SPA_PM)
+			if (nfit_spa_type(spa) != NFIT_SPA_PM)
 				continue;
 			/* find the spa that covers the mce addr */
 			if (spa->address > mce->addr)

drivers/acpi/scan.c

@@ -2054,7 +2054,7 @@ int __init acpi_scan_init(void)
 
 static struct acpi_probe_entry *ape;
 static int acpi_probe_count;
-static DEFINE_SPINLOCK(acpi_probe_lock);
+static DEFINE_MUTEX(acpi_probe_mutex);
 
 static int __init acpi_match_madt(struct acpi_subtable_header *header,
 				  const unsigned long end)
@@ -2073,7 +2073,7 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr)
 	if (acpi_disabled)
 		return 0;
 
-	spin_lock(&acpi_probe_lock);
+	mutex_lock(&acpi_probe_mutex);
 	for (ape = ap_head; nr; ape++, nr--) {
 		if (ACPI_COMPARE_NAME(ACPI_SIG_MADT, ape->id)) {
 			acpi_probe_count = 0;
@@ -2086,7 +2086,7 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr)
 				count++;
 		}
 	}
-	spin_unlock(&acpi_probe_lock);
+	mutex_unlock(&acpi_probe_mutex);
 
 	return count;
 }

drivers/ata/libahci.c

@@ -2524,7 +2524,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host,
 
 		/* Do not receive interrupts sent by dummy ports */
 		if (!pp) {
-			disable_irq(irq + i);
+			disable_irq(irq);
 			continue;
 		}
 

drivers/ata/pata_ninja32.c

@@ -144,7 +144,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	ap->ioaddr.altstatus_addr = base + 0x1E;
 	ap->ioaddr.bmdma_addr = base;
 	ata_sff_std_ports(&ap->ioaddr);
-	ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+	ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
 
 	ninja32_program(base);
 	/* FIXME: Should we disable them at remove ? */

drivers/base/power/runtime.c

@@ -301,7 +301,7 @@ static int rpm_idle(struct device *dev, int rpmflags)
 	int (*callback)(struct device *);
 	int retval;
 
-	trace_rpm_idle(dev, rpmflags);
+	trace_rpm_idle_rcuidle(dev, rpmflags);
 	retval = rpm_check_suspend_allowed(dev);
 	if (retval < 0)
 		;	/* Conditions are wrong. */
@@ -337,7 +337,7 @@ static int rpm_idle(struct device *dev, int rpmflags)
 			dev->power.request_pending = true;
 			queue_work(pm_wq, &dev->power.work);
 		}
-		trace_rpm_return_int(dev, _THIS_IP_, 0);
+		trace_rpm_return_int_rcuidle(dev, _THIS_IP_, 0);
 		return 0;
 	}
 
@@ -352,7 +352,7 @@ static int rpm_idle(struct device *dev, int rpmflags)
 	wake_up_all(&dev->power.wait_queue);
 
  out:
-	trace_rpm_return_int(dev, _THIS_IP_, retval);
+	trace_rpm_return_int_rcuidle(dev, _THIS_IP_, retval);
 	return retval ? retval : rpm_suspend(dev, rpmflags | RPM_AUTO);
 }
 
@@ -601,7 +601,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
 	struct device *parent = NULL;
 	int retval = 0;
 
-	trace_rpm_resume(dev, rpmflags);
+	trace_rpm_resume_rcuidle(dev, rpmflags);
 
  repeat:
 	if (dev->power.runtime_error)
@@ -764,7 +764,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
 		spin_lock_irq(&dev->power.lock);
 	}
 
-	trace_rpm_return_int(dev, _THIS_IP_, retval);
+	trace_rpm_return_int_rcuidle(dev, _THIS_IP_, retval);
 
 	return retval;
 }

drivers/base/regmap/regcache-rbtree.c

@@ -404,6 +404,7 @@ static int regcache_rbtree_write(struct regmap *map, unsigned int reg,
 		unsigned int new_base_reg, new_top_reg;
 		unsigned int min, max;
 		unsigned int max_dist;
+		unsigned int dist, best_dist = UINT_MAX;
 
 		max_dist = map->reg_stride * sizeof(*rbnode_tmp) /
 			map->cache_word_size;
@@ -423,24 +424,41 @@ static int regcache_rbtree_write(struct regmap *map, unsigned int reg,
 				&base_reg, &top_reg);
 
 			if (base_reg <= max && top_reg >= min) {
-				new_base_reg = min(reg, base_reg);
-				new_top_reg = max(reg, top_reg);
-			} else {
-				if (max < base_reg)
-					node = node->rb_left;
+				if (reg < base_reg)
+					dist = base_reg - reg;
+				else if (reg > top_reg)
+					dist = reg - top_reg;
 				else
-					node = node->rb_right;
-
-				continue;
+					dist = 0;
+				if (dist < best_dist) {
+					rbnode = rbnode_tmp;
+					best_dist = dist;
+					new_base_reg = min(reg, base_reg);
+					new_top_reg = max(reg, top_reg);
+				}
 			}
 
-			ret = regcache_rbtree_insert_to_block(map, rbnode_tmp,
+			/*
+			 * Keep looking, we want to choose the closest block,
+			 * otherwise we might end up creating overlapping
+			 * blocks, which breaks the rbtree.
+			 */
+			if (reg < base_reg)
+				node = node->rb_left;
+			else if (reg > top_reg)
+				node = node->rb_right;
+			else
+				break;
+		}
+
+		if (rbnode) {
+			ret = regcache_rbtree_insert_to_block(map, rbnode,
 							      new_base_reg,
 							      new_top_reg, reg,
 							      value);
 			if (ret)
 				return ret;
-			rbtree_ctx->cached_rbnode = rbnode_tmp;
+			rbtree_ctx->cached_rbnode = rbnode;
 			return 0;
 		}
 

drivers/base/regmap/regcache.c

@@ -38,10 +38,11 @@ static int regcache_hw_init(struct regmap *map)
 
 	/* calculate the size of reg_defaults */
 	for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++)
-		if (!regmap_volatile(map, i * map->reg_stride))
+		if (regmap_readable(map, i * map->reg_stride) &&
+		    !regmap_volatile(map, i * map->reg_stride))
 			count++;
 
-	/* all registers are volatile, so just bypass */
+	/* all registers are unreadable or volatile, so just bypass */
 	if (!count) {
 		map->cache_bypass = true;
 		return 0;

drivers/base/regmap/regmap.c

@@ -1474,6 +1474,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,
 		ret = map->bus->write(map->bus_context, buf, len);
 
 		kfree(buf);
+	} else if (ret != 0 && !map->cache_bypass && map->format.parse_val) {
+		regcache_drop_region(map, reg, reg + 1);
 	}
 
 	trace_regmap_hw_write_done(map, reg, val_len / map->format.val_bytes);

drivers/bus/arm-cci.c

@@ -551,7 +551,7 @@ static struct attribute *cci5xx_pmu_event_attrs[] = {
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB),
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC),
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD),
-	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE),
+	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_stall_tt_full, 0xE),
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF),
 	NULL
 };

drivers/bus/arm-ccn.c

@@ -187,6 +187,7 @@ struct arm_ccn {
 	struct arm_ccn_component *xp;
 
 	struct arm_ccn_dt dt;
+	int mn_id;
 };
 
 static DEFINE_MUTEX(arm_ccn_mutex);
@@ -212,6 +213,7 @@ static int arm_ccn_node_to_xp_port(int node)
 #define CCN_CONFIG_TYPE(_config)	(((_config) >> 8) & 0xff)
 #define CCN_CONFIG_EVENT(_config)	(((_config) >> 16) & 0xff)
 #define CCN_CONFIG_PORT(_config)	(((_config) >> 24) & 0x3)
+#define CCN_CONFIG_BUS(_config)		(((_config) >> 24) & 0x3)
 #define CCN_CONFIG_VC(_config)		(((_config) >> 26) & 0x7)
 #define CCN_CONFIG_DIR(_config)		(((_config) >> 29) & 0x1)
 #define CCN_CONFIG_MASK(_config)	(((_config) >> 30) & 0xf)
@@ -241,6 +243,7 @@ static CCN_FORMAT_ATTR(xp, "config:0-7");
 static CCN_FORMAT_ATTR(type, "config:8-15");
 static CCN_FORMAT_ATTR(event, "config:16-23");
 static CCN_FORMAT_ATTR(port, "config:24-25");
+static CCN_FORMAT_ATTR(bus, "config:24-25");
 static CCN_FORMAT_ATTR(vc, "config:26-28");
 static CCN_FORMAT_ATTR(dir, "config:29-29");
 static CCN_FORMAT_ATTR(mask, "config:30-33");
@@ -253,6 +256,7 @@ static struct attribute *arm_ccn_pmu_format_attrs[] = {
 	&arm_ccn_pmu_format_attr_type.attr.attr,
 	&arm_ccn_pmu_format_attr_event.attr.attr,
 	&arm_ccn_pmu_format_attr_port.attr.attr,
+	&arm_ccn_pmu_format_attr_bus.attr.attr,
 	&arm_ccn_pmu_format_attr_vc.attr.attr,
 	&arm_ccn_pmu_format_attr_dir.attr.attr,
 	&arm_ccn_pmu_format_attr_mask.attr.attr,
@@ -328,6 +332,7 @@ struct arm_ccn_pmu_event {
 static ssize_t arm_ccn_pmu_event_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
 	struct arm_ccn_pmu_event *event = container_of(attr,
 			struct arm_ccn_pmu_event, attr);
 	ssize_t res;
@@ -349,10 +354,17 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev,
 		break;
 	case CCN_TYPE_XP:
 		res += snprintf(buf + res, PAGE_SIZE - res,
-				",xp=?,port=?,vc=?,dir=?");
+				",xp=?,vc=?");
 		if (event->event == CCN_EVENT_WATCHPOINT)
 			res += snprintf(buf + res, PAGE_SIZE - res,
-					",cmp_l=?,cmp_h=?,mask=?");
+					",port=?,dir=?,cmp_l=?,cmp_h=?,mask=?");
+		else
+			res += snprintf(buf + res, PAGE_SIZE - res,
+					",bus=?");
+
+		break;
+	case CCN_TYPE_MN:
+		res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id);
 		break;
 	default:
 		res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
@@ -383,9 +395,9 @@ static umode_t arm_ccn_pmu_events_is_visible(struct kobject *kobj,
 }
 
 static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
-	CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
-	CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
-	CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
 	CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY),
 	CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY),
 	CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY),
@@ -733,9 +745,10 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
 
 	if (has_branch_stack(event) || event->attr.exclude_user ||
 			event->attr.exclude_kernel || event->attr.exclude_hv ||
-			event->attr.exclude_idle) {
+			event->attr.exclude_idle || event->attr.exclude_host ||
+			event->attr.exclude_guest) {
 		dev_warn(ccn->dev, "Can't exclude execution levels!\n");
-		return -EOPNOTSUPP;
+		return -EINVAL;
 	}
 
 	if (event->cpu < 0) {
@@ -759,6 +772,12 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
 
 	/* Validate node/xp vs topology */
 	switch (type) {
+	case CCN_TYPE_MN:
+		if (node_xp != ccn->mn_id) {
+			dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp);
+			return -EINVAL;
+		}
+		break;
 	case CCN_TYPE_XP:
 		if (node_xp >= ccn->num_xps) {
 			dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp);
@@ -886,6 +905,10 @@ static void arm_ccn_pmu_xp_dt_config(struct perf_event *event, int enable)
 	struct arm_ccn_component *xp;
 	u32 val, dt_cfg;
 
+	/* Nothing to do for cycle counter */
+	if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER)
+		return;
+
 	if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP)
 		xp = &ccn->xp[CCN_CONFIG_XP(event->attr.config)];
 	else
@@ -917,38 +940,17 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags)
 			arm_ccn_pmu_read_counter(ccn, hw->idx));
 	hw->state = 0;
 
-	/*
-	 * Pin the timer, so that the overflows are handled by the chosen
-	 * event->cpu (this is the same one as presented in "cpumask"
-	 * attribute).
-	 */
-	if (!ccn->irq)
-		hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
-				HRTIMER_MODE_REL_PINNED);
-
 	/* Set the DT bus input, engaging the counter */
 	arm_ccn_pmu_xp_dt_config(event, 1);
 }
 
 static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
 {
-	struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
 	struct hw_perf_event *hw = &event->hw;
-	u64 timeout;
 
 	/* Disable counting, setting the DT bus to pass-through mode */
 	arm_ccn_pmu_xp_dt_config(event, 0);
 
-	if (!ccn->irq)
-		hrtimer_cancel(&ccn->dt.hrtimer);
-
-	/* Let the DT bus drain */
-	timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) +
-			ccn->num_xps;
-	while (arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) <
-			timeout)
-		cpu_relax();
-
 	if (flags & PERF_EF_UPDATE)
 		arm_ccn_pmu_event_update(event);
 
@@ -988,7 +990,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event)
 
 	/* Comparison values */
 	writel(cmp_l & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp));
-	writel((cmp_l >> 32) & 0xefffffff,
+	writel((cmp_l >> 32) & 0x7fffffff,
 			source->base + CCN_XP_DT_CMP_VAL_L(wp) + 4);
 	writel(cmp_h & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_H(wp));
 	writel((cmp_h >> 32) & 0x0fffffff,
@@ -996,7 +998,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event)
 
 	/* Mask */
 	writel(mask_l & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp));
-	writel((mask_l >> 32) & 0xefffffff,
+	writel((mask_l >> 32) & 0x7fffffff,
 			source->base + CCN_XP_DT_CMP_MASK_L(wp) + 4);
 	writel(mask_h & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_H(wp));
 	writel((mask_h >> 32) & 0x0fffffff,
@@ -1014,7 +1016,7 @@ static void arm_ccn_pmu_xp_event_config(struct perf_event *event)
 	hw->event_base = CCN_XP_DT_CONFIG__DT_CFG__XP_PMU_EVENT(hw->config_base);
 
 	id = (CCN_CONFIG_VC(event->attr.config) << 4) |
-			(CCN_CONFIG_PORT(event->attr.config) << 3) |
+			(CCN_CONFIG_BUS(event->attr.config) << 3) |
 			(CCN_CONFIG_EVENT(event->attr.config) << 0);
 
 	val = readl(source->base + CCN_XP_PMU_EVENT_SEL);
@@ -1099,15 +1101,31 @@ static void arm_ccn_pmu_event_config(struct perf_event *event)
 	spin_unlock(&ccn->dt.config_lock);
 }
 
+static int arm_ccn_pmu_active_counters(struct arm_ccn *ccn)
+{
+	return bitmap_weight(ccn->dt.pmu_counters_mask,
+			     CCN_NUM_PMU_EVENT_COUNTERS + 1);
+}
+
 static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
 {
 	int err;
 	struct hw_perf_event *hw = &event->hw;
+	struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
 
 	err = arm_ccn_pmu_event_alloc(event);
 	if (err)
 		return err;
 
+	/*
+	 * Pin the timer, so that the overflows are handled by the chosen
+	 * event->cpu (this is the same one as presented in "cpumask"
+	 * attribute).
+	 */
+	if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 1)
+		hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
+			      HRTIMER_MODE_REL_PINNED);
+
 	arm_ccn_pmu_event_config(event);
 
 	hw->state = PERF_HES_STOPPED;
@@ -1120,9 +1138,14 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
 
 static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
 {
+	struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
+
 	arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
 
 	arm_ccn_pmu_event_release(event);
+
+	if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 0)
+		hrtimer_cancel(&ccn->dt.hrtimer);
 }
 
 static void arm_ccn_pmu_event_read(struct perf_event *event)
@@ -1130,6 +1153,24 @@ static void arm_ccn_pmu_event_read(struct perf_event *event)
 	arm_ccn_pmu_event_update(event);
 }
 
+static void arm_ccn_pmu_enable(struct pmu *pmu)
+{
+	struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
+
+	u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
+	val |= CCN_DT_PMCR__PMU_EN;
+	writel(val, ccn->dt.base + CCN_DT_PMCR);
+}
+
+static void arm_ccn_pmu_disable(struct pmu *pmu)
+{
+	struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
+
+	u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
+	val &= ~CCN_DT_PMCR__PMU_EN;
+	writel(val, ccn->dt.base + CCN_DT_PMCR);
+}
+
 static irqreturn_t arm_ccn_pmu_overflow_handler(struct arm_ccn_dt *dt)
 {
 	u32 pmovsr = readl(dt->base + CCN_DT_PMOVSR);
@@ -1252,6 +1293,8 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
 		.start = arm_ccn_pmu_event_start,
 		.stop = arm_ccn_pmu_event_stop,
 		.read = arm_ccn_pmu_event_read,
+		.pmu_enable = arm_ccn_pmu_enable,
+		.pmu_disable = arm_ccn_pmu_disable,
 	};
 
 	/* No overflow interrupt? Have to use a timer instead. */
@@ -1361,6 +1404,8 @@ static int arm_ccn_init_nodes(struct arm_ccn *ccn, int region,
 
 	switch (type) {
 	case CCN_TYPE_MN:
+		ccn->mn_id = id;
+		return 0;
 	case CCN_TYPE_DT:
 		return 0;
 	case CCN_TYPE_XP:
@@ -1471,8 +1516,9 @@ static int arm_ccn_probe(struct platform_device *pdev)
 		/* Can set 'disable' bits, so can acknowledge interrupts */
 		writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
 				ccn->base + CCN_MN_ERRINT_STATUS);
-		err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
-				dev_name(ccn->dev), ccn);
+		err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler,
+				       IRQF_NOBALANCING | IRQF_NO_THREAD,
+				       dev_name(ccn->dev), ccn);
 		if (err)
 			return err;
 

drivers/bus/vexpress-config.c

@@ -178,6 +178,7 @@ static int vexpress_config_populate(struct device_node *node)
 
 	parent = class_find_device(vexpress_config_class, NULL, bridge,
 			vexpress_config_node_match);
+	of_node_put(bridge);
 	if (WARN_ON(!parent))
 		return -ENODEV;
 

drivers/char/hw_random/Kconfig

@@ -244,7 +244,7 @@ config HW_RANDOM_TX4939
 
 config HW_RANDOM_MXC_RNGA
 	tristate "Freescale i.MX RNGA Random Number Generator"
-	depends on ARCH_HAS_RNGA
+	depends on SOC_IMX31
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number

drivers/char/tpm/tpm2-cmd.c

@@ -957,7 +957,7 @@ int tpm2_auto_startup(struct tpm_chip *chip)
 		goto out;
 
 	rc = tpm2_do_selftest(chip);
-	if (rc != TPM2_RC_INITIALIZE) {
+	if (rc != 0 && rc != TPM2_RC_INITIALIZE) {
 		dev_err(&chip->dev, "TPM self test failed\n");
 		goto out;
 	}
@@ -974,7 +974,6 @@ int tpm2_auto_startup(struct tpm_chip *chip)
 		}
 	}
 
-	return rc;
 out:
 	if (rc > 0)
 		rc = -ENODEV;

drivers/char/virtio_console.c

@@ -165,6 +165,12 @@ struct ports_device {
 	 */
 	struct virtqueue *c_ivq, *c_ovq;
 
+	/*
+	 * A control packet buffer for guest->host requests, protected
+	 * by c_ovq_lock.
+	 */
+	struct virtio_console_control cpkt;
+
 	/* Array of per-port IO virtqueues */
 	struct virtqueue **in_vqs, **out_vqs;
 
@@ -560,28 +566,29 @@ static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id,
 				  unsigned int event, unsigned int value)
 {
 	struct scatterlist sg[1];
-	struct virtio_console_control cpkt;
 	struct virtqueue *vq;
 	unsigned int len;
 
 	if (!use_multiport(portdev))
 		return 0;
 
-	cpkt.id = cpu_to_virtio32(portdev->vdev, port_id);
-	cpkt.event = cpu_to_virtio16(portdev->vdev, event);
-	cpkt.value = cpu_to_virtio16(portdev->vdev, value);
-
 	vq = portdev->c_ovq;
 
-	sg_init_one(sg, &cpkt, sizeof(cpkt));
-
 	spin_lock(&portdev->c_ovq_lock);
-	if (virtqueue_add_outbuf(vq, sg, 1, &cpkt, GFP_ATOMIC) == 0) {
+
+	portdev->cpkt.id = cpu_to_virtio32(portdev->vdev, port_id);
+	portdev->cpkt.event = cpu_to_virtio16(portdev->vdev, event);
+	portdev->cpkt.value = cpu_to_virtio16(portdev->vdev, value);
+
+	sg_init_one(sg, &portdev->cpkt, sizeof(struct virtio_console_control));
+
+	if (virtqueue_add_outbuf(vq, sg, 1, &portdev->cpkt, GFP_ATOMIC) == 0) {
 		virtqueue_kick(vq);
 		while (!virtqueue_get_buf(vq, &len)
 			&& !virtqueue_is_broken(vq))
 			cpu_relax();
 	}
+
 	spin_unlock(&portdev->c_ovq_lock);
 	return 0;
 }

drivers/clk/renesas/r8a7795-cpg-mssr.c

@@ -69,6 +69,7 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
 	DEF_FIXED(".s1",        CLK_S1,            CLK_PLL1_DIV2,  3, 1),
 	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
 	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
+	DEF_FIXED(".sdsrc",     CLK_SDSRC,         CLK_PLL1_DIV2,  2, 1),
 
 	/* Core Clock Outputs */
 	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
@@ -87,10 +88,10 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
 	DEF_FIXED("s3d2",       R8A7795_CLK_S3D2,  CLK_S3,         2, 1),
 	DEF_FIXED("s3d4",       R8A7795_CLK_S3D4,  CLK_S3,         4, 1),
 
-	DEF_GEN3_SD("sd0",      R8A7795_CLK_SD0,   CLK_PLL1_DIV2, 0x0074),
-	DEF_GEN3_SD("sd1",      R8A7795_CLK_SD1,   CLK_PLL1_DIV2, 0x0078),
-	DEF_GEN3_SD("sd2",      R8A7795_CLK_SD2,   CLK_PLL1_DIV2, 0x0268),
-	DEF_GEN3_SD("sd3",      R8A7795_CLK_SD3,   CLK_PLL1_DIV2, 0x026c),
+	DEF_GEN3_SD("sd0",      R8A7795_CLK_SD0,   CLK_SDSRC,     0x0074),
+	DEF_GEN3_SD("sd1",      R8A7795_CLK_SD1,   CLK_SDSRC,     0x0078),
+	DEF_GEN3_SD("sd2",      R8A7795_CLK_SD2,   CLK_SDSRC,     0x0268),
+	DEF_GEN3_SD("sd3",      R8A7795_CLK_SD3,   CLK_SDSRC,     0x026c),
 
 	DEF_FIXED("cl",         R8A7795_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
 	DEF_FIXED("cp",         R8A7795_CLK_CP,    CLK_EXTAL,      2, 1),