Merge branch 'x86/core' into perfcounters/core

Conflicts:
	arch/x86/Kconfig
	arch/x86/kernel/apic.c
	arch/x86/kernel/setup_percpu.c

Documentation/x86/boot.txt

@@ -158,7 +158,7 @@ Offset	Proto	Name		Meaning
 0202/4	2.00+	header		Magic signature "HdrS"
 0206/2	2.00+	version		Boot protocol version supported
 0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
-020C/2	2.00+	start_sys	The load-low segment (0x1000) (obsolete)
+020C/2	2.00+	start_sys_seg	The load-low segment (0x1000) (obsolete)
 020E/2	2.00+	kernel_version	Pointer to kernel version string
 0210/1	2.00+	type_of_loader	Boot loader identifier
 0211/1	2.00+	loadflags	Boot protocol option flags
@@ -170,10 +170,11 @@ Offset	Proto	Name		Meaning
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
 0226/2	N/A	pad1		Unused
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
-022C/4	2.03+	initrd_addr_max	Highest legal initrd address
+022C/4	2.03+	ramdisk_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/3	N/A	pad2		Unused
+0235/1	N/A	pad2		Unused
+0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -299,14 +300,14 @@ Protocol:	2.00+
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
-Field name:	readmode_swtch
+Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
 Protocol:	2.00+
 
   Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
 
-Field name:	start_sys
+Field name:	start_sys_seg
 Type:		read
 Offset/size:	0x20c/2
 Protocol:	2.00+
@@ -468,7 +469,7 @@ Protocol:	2.02+
   zero, the kernel will assume that your boot loader does not support
   the 2.02+ protocol.
 
-Field name:	initrd_addr_max
+Field name:	ramdisk_max
 Type:		read
 Offset/size:	0x22c/4
 Protocol:	2.03+

Makefile

@@ -532,8 +532,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 
 # Force gcc to behave correct even for buggy distributions
-# Arch Makefiles may override this setting
+ifndef CONFIG_CC_STACKPROTECTOR
 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
 
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls

arch/ia64/include/asm/percpu.h

@@ -27,12 +27,12 @@ extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
-
 #define per_cpu_init()				(__phys_per_cpu_start)
 
 #endif	/* SMP */
 
+#define PER_CPU_BASE_SECTION ".data.percpu"
+
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
  * remapping, it is different from the canonical address returned by __get_cpu_var(var)!

arch/ia64/include/asm/uv/uv.h

+#ifndef _ASM_IA64_UV_UV_H
+#define _ASM_IA64_UV_UV_H
+
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+
+static inline int is_uv_system(void)
+{
+	/* temporary support for running on hardware simulator */
+	return IS_MEDUSA() || ia64_platform_is("uv");
+}
+
+#endif	/* _ASM_IA64_UV_UV_H */

arch/ia64/kernel/acpi.c

@@ -199,6 +199,10 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 	return __va(phys_addr);
 }
 
+char *__init __acpi_unmap_table(unsigned long virt_addr, unsigned long size)
+{
+}
+
 /* --------------------------------------------------------------------------
                             Boot-time Table Parsing
    -------------------------------------------------------------------------- */

arch/x86/Kconfig.cpu

@@ -50,7 +50,7 @@ config M386
 config M486
 	bool "486"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
 	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
@@ -59,7 +59,7 @@ config M486
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
 	  assume the RDTSC (Read Time Stamp Counter) instruction.
@@ -67,21 +67,21 @@ config M586
 config M586TSC
 	bool "Pentium-Classic"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
 	bool "Pentium-MMX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 
 config M686
 	bool "Pentium-Pro"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
 	  against the f00f bug found in earlier Pentiums.
@@ -89,7 +89,7 @@ config M686
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
 	  copy optimization, compiles the kernel with optimization flags
@@ -99,7 +99,7 @@ config MPENTIUMII
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
 	  extended prefetch instructions in addition to the Pentium II
@@ -108,14 +108,14 @@ config MPENTIUMIII
 config MPENTIUMM
 	bool "Pentium M"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
 	  Pentium-4 M (not Pentium M) chips.  This option enables compile
@@ -151,7 +151,7 @@ config MPENTIUM4
 config MK6
 	bool "K6/K6-II/K6-III"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
@@ -159,14 +159,14 @@ config MK6
 config MK7
 	bool "Athlon/Duron/K7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
 
 config MK8
 	bool "Opteron/Athlon64/Hammer/K8"
-	help
+	---help---
 	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
 	  Enables use of some extended instructions, and passes appropriate
 	  optimization flags to GCC.
@@ -174,7 +174,7 @@ config MK8
 config MCRUSOE
 	bool "Crusoe"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
 	  Pentium Pro with no alignment requirements).
@@ -182,13 +182,13 @@ config MCRUSOE
 config MEFFICEON
 	bool "Efficeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
 	bool "Winchip-C6"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.
@@ -196,7 +196,7 @@ config MWINCHIPC6
 config MWINCHIP3D
 	bool "Winchip-2/Winchip-2A/Winchip-3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.  Also enable out of order memory
@@ -206,19 +206,19 @@ config MWINCHIP3D
 config MGEODEGX1
 	bool "GeodeGX1"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
 	bool "Geode GX/LX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
 	  it lacks the cmov extension which gcc assumes is present when
@@ -230,7 +230,7 @@ config MCYRIXIII
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
 	  Note, this kernel will not boot on older (pre model 9) C3s.
@@ -238,14 +238,14 @@ config MVIAC3_2
 config MVIAC7
 	bool "VIA C7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 
 config MPSC
 	bool "Intel P4 / older Netburst based Xeon"
 	depends on X86_64
-	help
+	---help---
 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
 	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
 	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
@@ -255,7 +255,7 @@ config MPSC
 
 config MCORE2
 	bool "Core 2/newer Xeon"
-	help
+	---help---
 
 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
 	  53xx) CPUs. You can distinguish newer from older Xeons by the CPU
@@ -265,7 +265,7 @@ config MCORE2
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
-	help
+	---help---
 	  Generic x86-64 CPU.
 	  Run equally well on all x86-64 CPUs.
 
@@ -274,7 +274,7 @@ endchoice
 config X86_GENERIC
 	bool "Generic x86 support"
 	depends on X86_32
-	help
+	---help---
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -319,7 +319,7 @@ config X86_XADD
 config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
 	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	help
+	---help---
 	  Old PentiumPro multiprocessor systems had errata that could cause
 	  memory operations to violate the x86 ordering standard in rare cases.
 	  Enabling this option will attempt to work around some (but not all)
@@ -412,14 +412,14 @@ config X86_DEBUGCTLMSR
 
 menuconfig PROCESSOR_SELECT
 	bool "Supported processor vendors" if EMBEDDED
-	help
+	---help---
 	  This lets you choose what x86 vendor support code your kernel
 	  will include.
 
 config CPU_SUP_INTEL
 	default y
 	bool "Support Intel processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Intel processors
 
 	  You need this enabled if you want your kernel to run on an
@@ -433,7 +433,7 @@ config CPU_SUP_CYRIX_32
 	default y
 	bool "Support Cyrix processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Cyrix processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -446,7 +446,7 @@ config CPU_SUP_CYRIX_32
 config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for AMD processors
 
 	  You need this enabled if you want your kernel to run on an
@@ -460,7 +460,7 @@ config CPU_SUP_CENTAUR_32
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -474,7 +474,7 @@ config CPU_SUP_CENTAUR_64
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on 64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -488,7 +488,7 @@ config CPU_SUP_TRANSMETA_32
 	default y
 	bool "Support Transmeta processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Transmeta processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -502,7 +502,7 @@ config CPU_SUP_UMC_32
 	default y
 	bool "Support UMC processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for UMC processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -521,7 +521,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
-	help
+	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 
 	  Debuggers may use it to collect an execution trace of the debugged

arch/x86/Kconfig.debug

@@ -7,7 +7,7 @@ source "lib/Kconfig.debug"
 
 config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
-	help
+	---help---
 	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
@@ -25,7 +25,7 @@ config STRICT_DEVMEM
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
-	help
+	---help---
 	  Enables the informational output from the decompression stage
 	  (e.g. bzImage) of the boot. If you disable this you will still
 	  see errors. Disable this if you want silent bootup.
@@ -33,7 +33,7 @@ config X86_VERBOSE_BOOTUP
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED
 	default y
-	help
+	---help---
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.
 
@@ -47,7 +47,7 @@ config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	default n
 	depends on EARLY_PRINTK && PCI
-	help
+	---help---
 	  Write kernel log output directly into the EHCI debug port.
 
 	  This is useful for kernel debugging when your machine crashes very
@@ -59,14 +59,14 @@ config EARLY_PRINTK_DBGP
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Enables the display of the minimum amount of free stack which each
 	  task has ever had available in the sysrq-T and sysrq-P debug output.
 
@@ -75,7 +75,7 @@ config DEBUG_STACK_USAGE
 config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
 	  of memory corruptions.
@@ -83,9 +83,9 @@ config DEBUG_PAGEALLOC
 config DEBUG_PER_CPU_MAPS
 	bool "Debug access to per_cpu maps"
 	depends on DEBUG_KERNEL
-	depends on X86_SMP
+	depends on SMP
 	default n
-	help
+	---help---
 	  Say Y to verify that the per_cpu map being accessed has
 	  been setup.  Adds a fair amount of code to kernel memory
 	  and decreases performance.
@@ -96,7 +96,7 @@ config X86_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
-	help
+	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -108,7 +108,7 @@ config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
 	default y
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Mark the kernel read-only data as write-protected in the pagetables,
 	  in order to catch accidental (and incorrect) writes to such const
 	  data. This is recommended so that we can catch kernel bugs sooner.
@@ -118,7 +118,7 @@ config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
 	default y
-	help
+	---help---
 	  This option enables a testcase for the DEBUG_RODATA
 	  feature as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"
@@ -126,7 +126,7 @@ config DEBUG_RODATA_TEST
 config DEBUG_NX_TEST
 	tristate "Testcase for the NX non-executable stack feature"
 	depends on DEBUG_KERNEL && m
-	help
+	---help---
 	  This option enables a testcase for the CPU NX capability
 	  and the software setup of this feature.
 	  If in doubt, say "N"
@@ -134,7 +134,7 @@ config DEBUG_NX_TEST
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on X86_32
-	help
+	---help---
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
 	  running more threads on a system and also reduces the pressure
@@ -145,7 +145,7 @@ config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
 	depends on X86_32
-	help
+	---help---
 	  This option allows trapping of rare doublefault exceptions that
 	  would otherwise cause a system to silently reboot. Disabling this
 	  option saves about 4k and might cause you much additional grey
@@ -155,7 +155,7 @@ config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
 	depends on GART_IOMMU && DEBUG_KERNEL
 	depends on X86_64
-	help
+	---help---
 	  Force the IOMMU to on even when you have less than 4GB of
 	  memory and add debugging code. On overflow always panic. And
 	  allow to enable IOMMU leak tracing. Can be disabled at boot
@@ -171,7 +171,7 @@ config IOMMU_LEAK
 	bool "IOMMU leak tracing"
 	depends on DEBUG_KERNEL
 	depends on IOMMU_DEBUG
-	help
+	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
@@ -224,25 +224,25 @@ choice
 
 config IO_DELAY_0X80
 	bool "port 0x80 based port-IO delay [recommended]"
-	help
+	---help---
 	  This is the traditional Linux IO delay used for in/out_p.
 	  It is the most tested hence safest selection here.
 
 config IO_DELAY_0XED
 	bool "port 0xed based port-IO delay"
-	help
+	---help---
 	  Use port 0xed as the IO delay. This frees up port 0x80 which is
 	  often used as a hardware-debug port.
 
 config IO_DELAY_UDELAY
 	bool "udelay based port-IO delay"
-	help
+	---help---
 	  Use udelay(2) as the IO delay method. This provides the delay
 	  while not having any side-effect on the IO port space.
 
 config IO_DELAY_NONE
 	bool "no port-IO delay"
-	help
+	---help---
 	  No port-IO delay. Will break on old boxes that require port-IO
 	  delay for certain operations. Should work on most new machines.
 
@@ -276,18 +276,18 @@ config DEBUG_BOOT_PARAMS
 	bool "Debug boot parameters"
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
-	help
+	---help---
 	  This option will cause struct boot_params to be exported via debugfs.
 
 config CPA_DEBUG
 	bool "CPA self-test code"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Do change_page_attr() self-tests every 30 seconds.
 
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	help
+	---help---
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
 	  do what it thinks is best, which is desirable for the gcc 3.x series of
@@ -300,4 +300,3 @@ config OPTIMIZE_INLINING
 	  If unsure, say N.
 
 endmenu
-

arch/x86/Makefile

@@ -70,14 +70,17 @@ else
         # this works around some issues with generating unwind tables in older gccs
         # newer gccs do it by default
         KBUILD_CFLAGS += -maccumulate-outgoing-args
+endif
 
-        stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
-        stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
-                "$(CC)" "-fstack-protector -DGCC_HAS_SP" )
-        stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
-                "$(CC)" -fstack-protector-all )
-
-        KBUILD_CFLAGS += $(stackp-y)
+ifdef CONFIG_CC_STACKPROTECTOR
+	cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
+        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+                stackp-y := -fstack-protector
+                stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
+                KBUILD_CFLAGS += $(stackp-y)
+        else
+                $(warning stack protector enabled but no compiler support)
+        endif
 endif
 
 # Stackpointer is addressed different for 32 bit and 64 bit x86
@@ -102,29 +105,6 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
 # prevent gcc from generating any FP code by mistake
 KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 
-###
-# Sub architecture support
-# fcore-y is linked before mcore-y files.
-
-# Default subarch .c files
-mcore-y  := arch/x86/mach-default/
-
-# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER)	:= -Iarch/x86/include/asm/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
-
-# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH):= -Iarch/x86/include/asm/mach-generic
-fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
-mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
-
-# default subarch .h files
-mflags-y += -Iarch/x86/include/asm/mach-default
-
-# 64 bit does not support subarch support - clear sub arch variables
-fcore-$(CONFIG_X86_64)  :=
-mcore-$(CONFIG_X86_64)  :=
-
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
@@ -150,9 +130,6 @@ core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
 core-y += arch/x86/kernel/
 core-y += arch/x86/mm/
 
-# Remaining sub architecture files
-core-y += $(mcore-y)
-
 core-y += arch/x86/crypto/
 core-y += arch/x86/vdso/
 core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/

arch/x86/boot/a20.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -15,16 +16,23 @@
 #include "boot.h"
 
 #define MAX_8042_LOOPS	100000
+#define MAX_8042_FF	32
 
 static int empty_8042(void)
 {
 	u8 status;
 	int loops = MAX_8042_LOOPS;
+	int ffs   = MAX_8042_FF;
 
 	while (loops--) {
 		io_delay();
 
 		status = inb(0x64);
+		if (status == 0xff) {
+			/* FF is a plausible, but very unlikely status */
+			if (!--ffs)
+				return -1; /* Assume no KBC present */
+		}
 		if (status & 1) {
 			/* Read and discard input data */
 			io_delay();
@@ -118,44 +126,43 @@ static void enable_a20_fast(void)
 
 int enable_a20(void)
 {
-#if defined(CONFIG_X86_ELAN)
-	/* Elan croaks if we try to touch the KBC */
-	enable_a20_fast();
-	while (!a20_test_long())
-		;
-	return 0;
-#elif defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_VOYAGER
 	/* On Voyager, a20_test() is unsafe? */
 	enable_a20_kbc();
 	return 0;
 #else
        int loops = A20_ENABLE_LOOPS;
-	while (loops--) {
-		/* First, check to see if A20 is already enabled
-		   (legacy free, etc.) */
-		if (a20_test_short())
-			return 0;
-
-		/* Next, try the BIOS (INT 0x15, AX=0x2401) */
-		enable_a20_bios();
-		if (a20_test_short())
-			return 0;
-
-		/* Try enabling A20 through the keyboard controller */
-		empty_8042();
-		if (a20_test_short())
-			return 0; /* BIOS worked, but with delayed reaction */
-
-		enable_a20_kbc();
-		if (a20_test_long())
-			return 0;
-
-		/* Finally, try enabling the "fast A20 gate" */
-		enable_a20_fast();
-		if (a20_test_long())
-			return 0;
-	}
-
-	return -1;
+       int kbc_err;
+
+       while (loops--) {
+	       /* First, check to see if A20 is already enabled
+		  (legacy free, etc.) */
+	       if (a20_test_short())
+		       return 0;
+	       
+	       /* Next, try the BIOS (INT 0x15, AX=0x2401) */
+	       enable_a20_bios();
+	       if (a20_test_short())
+		       return 0;
+	       
+	       /* Try enabling A20 through the keyboard controller */
+	       kbc_err = empty_8042();
+
+	       if (a20_test_short())
+		       return 0; /* BIOS worked, but with delayed reaction */
+	
+	       if (!kbc_err) {
+		       enable_a20_kbc();
+		       if (a20_test_long())
+			       return 0;
+	       }
+	       
+	       /* Finally, try enabling the "fast A20 gate" */
+	       enable_a20_fast();
+	       if (a20_test_long())
+		       return 0;
+       }
+       
+       return -1;
 #endif
 }

arch/x86/ia32/ia32_signal.c

@@ -46,78 +46,83 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
-	int err;
+	int err = 0;
 
 	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
-	/* If you change siginfo_t structure, please make sure that
-	   this code is fixed accordingly.
-	   It should never copy any pad contained in the structure
-	   to avoid security leaks, but must copy the generic
-	   3 ints plus the relevant union member.  */
-	err = __put_user(from->si_signo, &to->si_signo);
-	err |= __put_user(from->si_errno, &to->si_errno);
-	err |= __put_user((short)from->si_code, &to->si_code);
-
-	if (from->si_code < 0) {
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
-	} else {
-		/*
-		 * First 32bits of unions are always present:
-		 * si_pid === si_band === si_tid === si_addr(LS half)
-		 */
-		err |= __put_user(from->_sifields._pad[0],
-				  &to->_sifields._pad[0]);
-		switch (from->si_code >> 16) {
-		case __SI_FAULT >> 16:
-			break;
-		case __SI_CHLD >> 16:
-			err |= __put_user(from->si_utime, &to->si_utime);
-			err |= __put_user(from->si_stime, &to->si_stime);
-			err |= __put_user(from->si_status, &to->si_status);
-			/* FALL THROUGH */
-		default:
-		case __SI_KILL >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			break;
-		case __SI_POLL >> 16:
-			err |= __put_user(from->si_fd, &to->si_fd);
-			break;
-		case __SI_TIMER >> 16:
-			err |= __put_user(from->si_overrun, &to->si_overrun);
-			err |= __put_user(ptr_to_compat(from->si_ptr),
-					  &to->si_ptr);
-			break;
-			 /* This is not generated by the kernel as of now.  */
-		case __SI_RT >> 16:
-		case __SI_MESGQ >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			err |= __put_user(from->si_int, &to->si_int);
-			break;
+	put_user_try {
+		/* If you change siginfo_t structure, please make sure that
+		   this code is fixed accordingly.
+		   It should never copy any pad contained in the structure
+		   to avoid security leaks, but must copy the generic
+		   3 ints plus the relevant union member.  */
+		put_user_ex(from->si_signo, &to->si_signo);
+		put_user_ex(from->si_errno, &to->si_errno);
+		put_user_ex((short)from->si_code, &to->si_code);
+
+		if (from->si_code < 0) {
+			put_user_ex(from->si_pid, &to->si_pid);
+			put_user_ex(from->si_uid, &to->si_uid);
+			put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr);
+		} else {
+			/*
+			 * First 32bits of unions are always present:
+			 * si_pid === si_band === si_tid === si_addr(LS half)
+			 */
+			put_user_ex(from->_sifields._pad[0],
+					  &to->_sifields._pad[0]);
+			switch (from->si_code >> 16) {
+			case __SI_FAULT >> 16:
+				break;
+			case __SI_CHLD >> 16:
+				put_user_ex(from->si_utime, &to->si_utime);
+				put_user_ex(from->si_stime, &to->si_stime);
+				put_user_ex(from->si_status, &to->si_status);
+				/* FALL THROUGH */
+			default:
+			case __SI_KILL >> 16:
+				put_user_ex(from->si_uid, &to->si_uid);
+				break;
+			case __SI_POLL >> 16:
+				put_user_ex(from->si_fd, &to->si_fd);
+				break;
+			case __SI_TIMER >> 16:
+				put_user_ex(from->si_overrun, &to->si_overrun);
+				put_user_ex(ptr_to_compat(from->si_ptr),
+					    &to->si_ptr);
+				break;
+				 /* This is not generated by the kernel as of now.  */
+			case __SI_RT >> 16:
+			case __SI_MESGQ >> 16:
+				put_user_ex(from->si_uid, &to->si_uid);
+				put_user_ex(from->si_int, &to->si_int);
+				break;
+			}
 		}
-	}
+	} put_user_catch(err);
+
 	return err;
 }
 
 int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 {
-	int err;
+	int err = 0;
 	u32 ptr32;
 
 	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
-	err = __get_user(to->si_signo, &from->si_signo);
-	err |= __get_user(to->si_errno, &from->si_errno);
-	err |= __get_user(to->si_code, &from->si_code);
+	get_user_try {
+		get_user_ex(to->si_signo, &from->si_signo);
+		get_user_ex(to->si_errno, &from->si_errno);
+		get_user_ex(to->si_code, &from->si_code);
 
-	err |= __get_user(to->si_pid, &from->si_pid);
-	err |= __get_user(to->si_uid, &from->si_uid);
-	err |= __get_user(ptr32, &from->si_ptr);
-	to->si_ptr = compat_ptr(ptr32);
+		get_user_ex(to->si_pid, &from->si_pid);
+		get_user_ex(to->si_uid, &from->si_uid);
+		get_user_ex(ptr32, &from->si_ptr);
+		to->si_ptr = compat_ptr(ptr32);
+	} get_user_catch(err);
 
 	return err;
 }
@@ -142,17 +147,23 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 				  struct pt_regs *regs)
 {
 	stack_t uss, uoss;
-	int ret;
+	int ret, err = 0;
 	mm_segment_t seg;
 
 	if (uss_ptr) {
 		u32 ptr;
 
 		memset(&uss, 0, sizeof(stack_t));
-		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)) ||
-			    __get_user(ptr, &uss_ptr->ss_sp) ||
-			    __get_user(uss.ss_flags, &uss_ptr->ss_flags) ||
-			    __get_user(uss.ss_size, &uss_ptr->ss_size))
+		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)))
+			return -EFAULT;
+
+		get_user_try {
+			get_user_ex(ptr, &uss_ptr->ss_sp);
+			get_user_ex(uss.ss_flags, &uss_ptr->ss_flags);
+			get_user_ex(uss.ss_size, &uss_ptr->ss_size);
+		} get_user_catch(err);
+
+		if (err)
 			return -EFAULT;
 		uss.ss_sp = compat_ptr(ptr);
 	}
@@ -161,10 +172,16 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 	ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->sp);
 	set_fs(seg);
 	if (ret >= 0 && uoss_ptr)  {
-		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)) ||
-		    __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) ||
-		    __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
-		    __put_user(uoss.ss_size, &uoss_ptr->ss_size))
+		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)))
+			return -EFAULT;
+
+		put_user_try {
+			put_user_ex(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp);
+			put_user_ex(uoss.ss_flags, &uoss_ptr->ss_flags);
+			put_user_ex(uoss.ss_size, &uoss_ptr->ss_size);
+		} put_user_catch(err);
+
+		if (err)
 			ret = -EFAULT;
 	}
 	return ret;
@@ -174,18 +191,18 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
  * Do a signal return; undo the signal stack.
  */
 #define COPY(x)			{		\
-	err |= __get_user(regs->x, &sc->x);	\
+	get_user_ex(regs->x, &sc->x);		\
 }
 
 #define COPY_SEG_CPL3(seg)	{			\
 		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
+		get_user_ex(tmp, &sc->seg);		\
 		regs->seg = tmp | 3;			\
 }
 
 #define RELOAD_SEG(seg)		{		\
 	unsigned int cur, pre;			\
-	err |= __get_user(pre, &sc->seg);	\
+	get_user_ex(pre, &sc->seg);		\
 	savesegment(seg, cur);			\
 	pre |= 3;				\
 	if (pre != cur)				\
@@ -209,39 +226,42 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	       sc, sc->err, sc->ip, sc->cs, sc->flags);
 #endif
 
-	/*
-	 * Reload fs and gs if they have changed in the signal
-	 * handler.  This does not handle long fs/gs base changes in
-	 * the handler, but does not clobber them at least in the
-	 * normal case.
-	 */
-	err |= __get_user(gs, &sc->gs);
-	gs |= 3;
-	savesegment(gs, oldgs);
-	if (gs != oldgs)
-		load_gs_index(gs);
-
-	RELOAD_SEG(fs);
-	RELOAD_SEG(ds);
-	RELOAD_SEG(es);
-
-	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
-	COPY(dx); COPY(cx); COPY(ip);
-	/* Don't touch extended registers */
-
-	COPY_SEG_CPL3(cs);
-	COPY_SEG_CPL3(ss);
-
-	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
-	/* disable syscall checks */
-	regs->orig_ax = -1;
-
-	err |= __get_user(tmp, &sc->fpstate);
-	buf = compat_ptr(tmp);
-	err |= restore_i387_xstate_ia32(buf);
-
-	err |= __get_user(*pax, &sc->ax);
+	get_user_try {
+		/*
+		 * Reload fs and gs if they have changed in the signal
+		 * handler.  This does not handle long fs/gs base changes in
+		 * the handler, but does not clobber them at least in the
+		 * normal case.
+		 */
+		get_user_ex(gs, &sc->gs);
+		gs |= 3;
+		savesegment(gs, oldgs);
+		if (gs != oldgs)
+			load_gs_index(gs);
+
+		RELOAD_SEG(fs);
+		RELOAD_SEG(ds);
+		RELOAD_SEG(es);
+
+		COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
+		COPY(dx); COPY(cx); COPY(ip);
+		/* Don't touch extended registers */
+
+		COPY_SEG_CPL3(cs);
+		COPY_SEG_CPL3(ss);
+
+		get_user_ex(tmpflags, &sc->flags);
+		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+		/* disable syscall checks */
+		regs->orig_ax = -1;
+
+		get_user_ex(tmp, &sc->fpstate);
+		buf = compat_ptr(tmp);
+		err |= restore_i387_xstate_ia32(buf);
+
+		get_user_ex(*pax, &sc->ax);
+	} get_user_catch(err);
+
 	return err;
 }
 
@@ -319,36 +339,38 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
 {
 	int tmp, err = 0;
 
-	savesegment(gs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-	savesegment(fs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
-	savesegment(ds, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->ds);
-	savesegment(es, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->es);
-
-	err |= __put_user(regs->di, &sc->di);
-	err |= __put_user(regs->si, &sc->si);
-	err |= __put_user(regs->bp, &sc->bp);
-	err |= __put_user(regs->sp, &sc->sp);
-	err |= __put_user(regs->bx, &sc->bx);
-	err |= __put_user(regs->dx, &sc->dx);
-	err |= __put_user(regs->cx, &sc->cx);
-	err |= __put_user(regs->ax, &sc->ax);
-	err |= __put_user(current->thread.trap_no, &sc->trapno);
-	err |= __put_user(current->thread.error_code, &sc->err);
-	err |= __put_user(regs->ip, &sc->ip);
-	err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
-	err |= __put_user(regs->flags, &sc->flags);
-	err |= __put_user(regs->sp, &sc->sp_at_signal);
-	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
-
-	err |= __put_user(ptr_to_compat(fpstate), &sc->fpstate);
-
-	/* non-iBCS2 extensions.. */
-	err |= __put_user(mask, &sc->oldmask);
-	err |= __put_user(current->thread.cr2, &sc->cr2);
+	put_user_try {
+		savesegment(gs, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->gs);
+		savesegment(fs, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->fs);
+		savesegment(ds, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->ds);
+		savesegment(es, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->es);
+
+		put_user_ex(regs->di, &sc->di);
+		put_user_ex(regs->si, &sc->si);
+		put_user_ex(regs->bp, &sc->bp);
+		put_user_ex(regs->sp, &sc->sp);
+		put_user_ex(regs->bx, &sc->bx);
+		put_user_ex(regs->dx, &sc->dx);
+		put_user_ex(regs->cx, &sc->cx);
+		put_user_ex(regs->ax, &sc->ax);
+		put_user_ex(current->thread.trap_no, &sc->trapno);
+		put_user_ex(current->thread.error_code, &sc->err);
+		put_user_ex(regs->ip, &sc->ip);
+		put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
+		put_user_ex(regs->flags, &sc->flags);
+		put_user_ex(regs->sp, &sc->sp_at_signal);
+		put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
+
+		put_user_ex(ptr_to_compat(fpstate), &sc->fpstate);
+
+		/* non-iBCS2 extensions.. */
+		put_user_ex(mask, &sc->oldmask);
+		put_user_ex(current->thread.cr2, &sc->cr2);
+	} put_user_catch(err);
 
 	return err;
 }
@@ -437,13 +459,17 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		else
 			restorer = &frame->retcode;
 	}
-	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
 
-	/*
-	 * These are actually not used anymore, but left because some
-	 * gdb versions depend on them as a marker.
-	 */
-	err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode);
+	put_user_try {
+		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
+
+		/*
+		 * These are actually not used anymore, but left because some
+		 * gdb versions depend on them as a marker.
+		 */
+		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+	} put_user_catch(err);
+
 	if (err)
 		return -EFAULT;
 
@@ -496,41 +522,40 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
 
-	err |= __put_user(sig, &frame->sig);
-	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
-	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
-	err |= copy_siginfo_to_user32(&frame->info, info);
-	if (err)
-		return -EFAULT;
+	put_user_try {
+		put_user_ex(sig, &frame->sig);
+		put_user_ex(ptr_to_compat(&frame->info), &frame->pinfo);
+		put_user_ex(ptr_to_compat(&frame->uc), &frame->puc);
+		err |= copy_siginfo_to_user32(&frame->info, info);
 
-	/* Create the ucontext.  */
-	if (cpu_has_xsave)
-		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
-	else
-		err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->sp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-				     regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		return -EFAULT;
+		/* Create the ucontext.  */
+		if (cpu_has_xsave)
+			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
+		else
+			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(0, &frame->uc.uc_link);
+		put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+		put_user_ex(sas_ss_flags(regs->sp),
+			    &frame->uc.uc_stack.ss_flags);
+		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+		err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+					     regs, set->sig[0]);
+		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+		if (ka->sa.sa_flags & SA_RESTORER)
+			restorer = ka->sa.sa_restorer;
+		else
+			restorer = VDSO32_SYMBOL(current->mm->context.vdso,
+						 rt_sigreturn);
+		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
+
+		/*
+		 * Not actually used anymore, but left because some gdb
+		 * versions need it.
+		 */
+		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+	} put_user_catch(err);
 
-	if (ka->sa.sa_flags & SA_RESTORER)
-		restorer = ka->sa.sa_restorer;
-	else
-		restorer = VDSO32_SYMBOL(current->mm->context.vdso,
-					 rt_sigreturn);
-	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
-
-	/*
-	 * Not actually used anymore, but left because some gdb
-	 * versions need it.
-	 */
-	err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode);
 	if (err)
 		return -EFAULT;
 

arch/x86/include/asm/a.out-core.h

@@ -55,7 +55,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 	dump->regs.ds = (u16)regs->ds;
 	dump->regs.es = (u16)regs->es;
 	dump->regs.fs = (u16)regs->fs;
-	savesegment(gs, dump->regs.gs);
+	dump->regs.gs = get_user_gs(regs);
 	dump->regs.orig_ax = regs->orig_ax;
 	dump->regs.ip = regs->ip;
 	dump->regs.cs = (u16)regs->cs;

arch/x86/include/asm/acpi.h

@@ -102,9 +102,6 @@ static inline void disable_acpi(void)
 	acpi_noirq = 1;
 }
 
-/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
-#define FIX_ACPI_PAGES 4
-
 extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 
 static inline void acpi_noirq_set(void) { acpi_noirq = 1; }

arch/x86/include/asm/apic.h

@@ -33,7 +33,13 @@
 	} while (0)
 
 
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 extern void generic_apic_probe(void);
+#else
+static inline void generic_apic_probe(void)
+{
+}
+#endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
@@ -41,6 +47,21 @@ extern unsigned int apic_verbosity;
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+
+#ifdef CONFIG_SMP
+extern void __inquire_remote_apic(int apicid);
+#else /* CONFIG_SMP */
+static inline void __inquire_remote_apic(int apicid)
+{
+}
+#endif /* CONFIG_SMP */
+
+static inline void default_inquire_remote_apic(int apicid)
+{
+	if (apic_verbosity >= APIC_DEBUG)
+		__inquire_remote_apic(apicid);
+}
+
 /*
  * Basic functions accessing APICs.
  */
@@ -124,12 +145,35 @@ struct apic_ops {
 
 extern struct apic_ops *apic_ops;
 
-#define apic_read (apic_ops->read)
-#define apic_write (apic_ops->write)
-#define apic_icr_read (apic_ops->icr_read)
-#define apic_icr_write (apic_ops->icr_write)
-#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
-#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+static inline u32 apic_read(u32 reg)
+{
+	return apic_ops->read(reg);
+}
+
+static inline void apic_write(u32 reg, u32 val)
+{
+	apic_ops->write(reg, val);
+}
+
+static inline u64 apic_icr_read(void)
+{
+	return apic_ops->icr_read();
+}
+
+static inline void apic_icr_write(u32 low, u32 high)
+{
+	apic_ops->icr_write(low, high);
+}
+
+static inline void apic_wait_icr_idle(void)
+{
+	apic_ops->wait_icr_idle();
+}
+
+static inline u32 safe_apic_wait_icr_idle(void)
+{
+	return apic_ops->safe_wait_icr_idle();
+}
 
 extern int get_physical_broadcast(void);
 
@@ -196,4 +240,22 @@ static inline void disable_local_APIC(void) { }
 
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
+#ifdef CONFIG_X86_64
+#define	SET_APIC_ID(x)		(apic->set_apic_id(x))
+#else
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static inline unsigned default_get_apic_id(unsigned long x)
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+
+	if (APIC_XAPIC(ver))
+		return (x >> 24) & 0xFF;
+	else
+		return (x >> 24) & 0x0F;
+}
+#endif
+
+#endif
+
 #endif /* _ASM_X86_APIC_H */

arch/x86/include/asm/bigsmp/apicdef.h

-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	return (((x)>>24)&0xFF);
-}
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif

arch/x86/include/asm/bigsmp/ipi.h

-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */

arch/x86/include/asm/cpu.h

@@ -32,10 +32,6 @@ extern void arch_unregister_cpu(int);
 
 DECLARE_PER_CPU(int, cpu_state);
 
-#ifdef CONFIG_X86_HAS_BOOT_CPU_ID
-extern unsigned char boot_cpu_id;
-#else
-#define boot_cpu_id				0
-#endif
+extern unsigned int boot_cpu_id;
 
 #endif /* _ASM_X86_CPU_H */

arch/x86/include/asm/cpumask.h

@@ -10,6 +10,8 @@ extern cpumask_var_t cpu_callout_mask;
 extern cpumask_var_t cpu_initialized_mask;
 extern cpumask_var_t cpu_sibling_setup_mask;
 
+extern void setup_cpu_local_masks(void);
+
 #else /* CONFIG_X86_32 */
 
 extern cpumask_t cpu_callin_map;
@@ -22,6 +24,8 @@ extern cpumask_t cpu_sibling_setup_map;
 #define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 #define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
 
+static inline void setup_cpu_local_masks(void) { }
+
 #endif /* CONFIG_X86_32 */
 
 #endif /* __ASSEMBLY__ */

arch/x86/include/asm/elf.h

@@ -112,7 +112,7 @@ extern unsigned int vdso_enabled;
  * now struct_user_regs, they are different)
  */
 
-#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+#define ELF_CORE_COPY_REGS_COMMON(pr_reg, regs)	\
 do {						\
 	pr_reg[0] = regs->bx;			\
 	pr_reg[1] = regs->cx;			\
@@ -124,7 +124,6 @@ do {						\
 	pr_reg[7] = regs->ds & 0xffff;		\
 	pr_reg[8] = regs->es & 0xffff;		\
 	pr_reg[9] = regs->fs & 0xffff;		\
-	savesegment(gs, pr_reg[10]);		\
 	pr_reg[11] = regs->orig_ax;		\
 	pr_reg[12] = regs->ip;			\
 	pr_reg[13] = regs->cs & 0xffff;		\
@@ -133,6 +132,18 @@ do {						\
 	pr_reg[16] = regs->ss & 0xffff;		\
 } while (0);
 
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+do {						\
+	ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+	pr_reg[10] = get_user_gs(regs);		\
+} while (0);
+
+#define ELF_CORE_COPY_KERNEL_REGS(pr_reg, regs)	\
+do {						\
+	ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+	savesegment(gs, pr_reg[10]);		\
+} while (0);
+
 #define ELF_PLATFORM	(utsname()->machine)
 #define set_personality_64bit()	do { } while (0)