提交 b10c0668 编写于 作者: B Brice Goglin 提交者: Jeff Garzik

[PATCH] myri10ge update

The following patch updates the myri10ge to 1.0.0, with the following changes:
* Switch to dma_alloc_coherent API.
* Avoid PCI burst when writing the firmware on chipset with unaligned completions.
* Use ethtool_op_set_tx_hw_csum instead of ethtool_op_set_tx_csum.
* Include linux/dma-mapping.h to bring DMA_32/64BIT_MASK on all architectures
  (was missing at least on alpha).
* Some typo and warning fixes.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NAndrew J. Gallatin <gallatin@myri.com>

 drivers/net/myri10ge/myri10ge.c |   57 +++++++++++++++++++-----------
 1 file changed, 37 insertions(+), 20 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 d15a88fc
......@@ -44,6 +44,7 @@
#include <linux/string.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
......@@ -62,7 +63,6 @@
#include <net/checksum.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/processor.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
......@@ -71,7 +71,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
#define MYRI10GE_VERSION_STR "0.9.0"
#define MYRI10GE_VERSION_STR "1.0.0"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
......@@ -480,7 +480,19 @@ static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
goto abort_with_fw;
crc = crc32(~0, fw->data, fw->size);
memcpy_toio(mgp->sram + MYRI10GE_FW_OFFSET, fw->data, fw->size);
if (mgp->tx.boundary == 2048) {
/* Avoid PCI burst on chipset with unaligned completions. */
int i;
__iomem u32 *ptr = (__iomem u32 *) (mgp->sram +
MYRI10GE_FW_OFFSET);
for (i = 0; i < fw->size / 4; i++) {
__raw_writel(((u32 *) fw->data)[i], ptr + i);
wmb();
}
} else {
myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET, fw->data,
fw->size);
}
/* corruption checking is good for parity recovery and buggy chipset */
memcpy_fromio(fw->data, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
reread_crc = crc32(~0, fw->data, fw->size);
......@@ -536,6 +548,7 @@ static int myri10ge_load_firmware(struct myri10ge_priv *mgp)
u32 dma_low, dma_high, size;
int status, i;
size = 0;
status = myri10ge_load_hotplug_firmware(mgp, &size);
if (status) {
dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
......@@ -778,7 +791,7 @@ myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
}
/*
* Set of routunes to get a new receive buffer. Any buffer which
* Set of routines to get a new receive buffer. Any buffer which
* crosses a 4KB boundary must start on a 4KB boundary due to PCIe
* wdma restrictions. We also try to align any smaller allocation to
* at least a 16 byte boundary for efficiency. We assume the linux
......@@ -1349,7 +1362,7 @@ static struct ethtool_ops myri10ge_ethtool_ops = {
.get_rx_csum = myri10ge_get_rx_csum,
.set_rx_csum = myri10ge_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
.set_tx_csum = ethtool_op_set_tx_csum,
.set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
#ifdef NETIF_F_TSO
......@@ -2615,12 +2628,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
goto abort_with_netdev;
}
mgp->cmd = pci_alloc_consistent(pdev, sizeof(*mgp->cmd), &mgp->cmd_bus);
mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
&mgp->cmd_bus, GFP_KERNEL);
if (mgp->cmd == NULL)
goto abort_with_netdev;
mgp->fw_stats = pci_alloc_consistent(pdev, sizeof(*mgp->fw_stats),
&mgp->fw_stats_bus);
mgp->fw_stats = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
&mgp->fw_stats_bus, GFP_KERNEL);
if (mgp->fw_stats == NULL)
goto abort_with_cmd;
......@@ -2659,8 +2673,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* allocate rx done ring */
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
mgp->rx_done.entry =
pci_alloc_consistent(pdev, bytes, &mgp->rx_done.bus);
mgp->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
&mgp->rx_done.bus, GFP_KERNEL);
if (mgp->rx_done.entry == NULL)
goto abort_with_ioremap;
memset(mgp->rx_done.entry, 0, bytes);
......@@ -2750,7 +2764,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
abort_with_rx_done:
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
pci_free_consistent(pdev, bytes, mgp->rx_done.entry, mgp->rx_done.bus);
dma_free_coherent(&pdev->dev, bytes,
mgp->rx_done.entry, mgp->rx_done.bus);
abort_with_ioremap:
iounmap(mgp->sram);
......@@ -2760,11 +2775,12 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
pci_free_consistent(pdev, sizeof(*mgp->fw_stats),
mgp->fw_stats, mgp->fw_stats_bus);
dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
mgp->fw_stats, mgp->fw_stats_bus);
abort_with_cmd:
pci_free_consistent(pdev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
abort_with_netdev:
......@@ -2799,7 +2815,8 @@ static void myri10ge_remove(struct pci_dev *pdev)
myri10ge_dummy_rdma(mgp, 0);
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
pci_free_consistent(pdev, bytes, mgp->rx_done.entry, mgp->rx_done.bus);
dma_free_coherent(&pdev->dev, bytes,
mgp->rx_done.entry, mgp->rx_done.bus);
iounmap(mgp->sram);
......@@ -2807,19 +2824,20 @@ static void myri10ge_remove(struct pci_dev *pdev)
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
pci_free_consistent(pdev, sizeof(*mgp->fw_stats),
mgp->fw_stats, mgp->fw_stats_bus);
dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
mgp->fw_stats, mgp->fw_stats_bus);
pci_free_consistent(pdev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
free_netdev(netdev);
pci_set_drvdata(pdev, NULL);
}
#define PCI_DEVICE_ID_MYIRCOM_MYRI10GE_Z8E 0x0008
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
static struct pci_device_id myri10ge_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYIRCOM_MYRI10GE_Z8E)},
{PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
{0},
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册